Speeding Up The R&D Metrology Process

By Mark LaPedus - 16 Jul, 2020 - Comments: 0

Several chipmakers are making some major changes in the characterization/metrology lab, adding more fab-like processes in this group to help speed up chip development times. The characterization/metrology lab, which is generally under the radar, is a group that works with the R&D organization and the fab. The characterization lab is involved in the early analytical work for next-generati... » read more

Challenges In Stacking, Shrinking And Inspecting Next-Gen Chips

By Ed Sperling and Mark LaPedus - 21 May, 2020 - Comments: 0

Rick Gottscho, CTO of Lam Research, sat down with Semiconductor Engineering to discuss memory and equipment scaling, new market demands, and changes in manufacturing being driven by cost, new technologies, and the application of machine learning. What follows are excerpts of that conversation. SE: We have a lot of different memory technologies coming to market. What's the impact of that? ... » read more

Metrology Challenges For Gate-All-Around

By Mark LaPedus - 16 Apr, 2020 - Comments: 3

Metrology is proving to be a major challenge for those foundries working on processes for gate-all-around FETs at 3nm and beyond. Metrology is the art of measuring and characterizing structures in devices. Measuring and characterizing structures in devices has become more difficult and expensive at each new node, and the introduction of new types of transistors is making this even harder. Ev... » read more

Making Chips At 3nm And Beyond

By Mark LaPedus and Ed Sperling - 16 Apr, 2020 - Comments: 4

Select foundries are beginning to ramp up their new 5nm processes with 3nm in R&D. The big question is what comes after that. Work is well underway for the 2nm node and beyond, but there are numerous challenges as well as some uncertainty on the horizon. There already are signs that the foundries have pushed out their 3nm production schedules by a few months due to various technical issu... » read more

5/3nm Wars Begin

By Mark LaPedus - 23 Jan, 2020 - Comments: 6

Several foundries are ramping up their new 5nm processes in the market, but now customers must decide whether to design their next chips around the current transistor type or move to a different one at 3nm and beyond. The decision involves the move to extend today’s finFETs to 3nm, or to implement a new technology called gate-all-around FETs (GAA FETs) at 3nm or 2nm. An evolutionary step f... » read more

Multi-Patterning EUV Vs. High-NA EUV

By Mark LaPedus - 04 Dec, 2019 - Comments: 4

Foundries are finally in production with EUV lithography at 7nm, but chip customers must now decide whether to implement their next designs using EUV-based multiple patterning at 5nm/3nm or wait for a new single-patterning EUV system at 3nm and beyond. This scenario revolves around ASML’s current extreme ultraviolet (EUV) lithography tool (NXE:3400C) versus a completely new EUV system with... » read more

Another Brick Or Two In The Chip Design Wall

By Ed Sperling - 12 Sep, 2019 - Comments: 1

Physical challenges come and go in the semiconductor world. But increasingly, they also stick around, showing up in inconvenient places at the worst time. The chip industry has confronted and solved some massive challenges over the years. There was the 1 micron lithography wall, which was supposed to be impenetrable. That was followed by the 193nm litho challenge, which cost many billions of... » read more

What’s Next For Transistors

By Mark LaPedus - 23 Jan, 2017 - Comments: 1

The IC industry is moving in several different directions at once. The largest chipmakers continue to march down process nodes with chip scaling, while others are moving towards various advanced packaging schemes. On top of that, post-CMOS devices, neuromorphic chips and quantum computing are all in the works. Semiconductor Engineering sat down to discuss these technologies with Marie Semeri... » read more

Uncertainty Grows For 5nm, 3nm

By Mark LaPedus - 19 Dec, 2016 - Comments: 4

As several chipmakers ramp up their 10nm finFET processes, with 7nm just around the corner, R&D has begun for 5nm and beyond. In fact, some are already moving full speed ahead in the arena. [getentity id="22586" comment="TSMC"] recently announced plans to build a new fab in Taiwan at a cost of $15.7 billion. The proposed fab is targeted to manufacture TSMC’s 5nm and 3nm processes, whic... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?