Big Changes In Patterning

By Ed Sperling - 22 Feb, 2017 - Comments: 0

Aki Fujimura, CEO of [getentity id="22864" comment="D2S"], sat down with Semiconductor Engineering to discuss patterning issues at 10nm and below, including mask alignment, the need for GPU acceleration, EUV's future impact on the total number of masks, and what the re-introduction of curvilinear shapes will mean for design. SE: Patterning issues are getting a lot of attention at 10nm and 7n... » read more

Battling Fab Cycle Times

By Mark LaPedus - 16 Feb, 2017 - Comments: 9

The shift from planar devices to finFETs enables chipmakers to scale their processes and devices from 16nm/14nm and beyond, but the industry faces several challenges at each node. Cost and technical issues are the obvious challenges. In addition, cycle time—a key but less publicized part of the chip-scaling equation—also is increasing at every turn, creating more angst for chipmakers and... » read more

Inside Photomask Writing

By Mark LaPedus - 19 Jan, 2017 - Comments: 0

Hirokazu Yamada, a board member and the director of the Mask Lithography Division of NuFlare, sat down with Semiconductor Engineering to discuss photomask technology, e-beam mask writer trends and other topics. NuFlare is the world’s largest supplier of e-beam mask writers. What follows are excerpts of that conversation. SE: How does the [getkc id="265" kc_name="photomask"] market look in... » read more

Fab Tool Biz Faces Challenges In 2017

By Mark LaPedus - 15 Dec, 2016 - Comments: 3

After experiencing a gradual recovery and positive growth in 2016, the semiconductor equipment industry sees a mixed picture as well as some uncertainty in 2017. In the near term, though, business is robust. Several chipmakers started to place a sizeable number of fab tool orders in the latter part of 2016, particularly in three areas—3D NAND, logic and foundry. Now, after buying the in... » read more

More EUV Mask Gaps

By Mark LaPedus - 17 Nov, 2016 - Comments: 12

Extreme ultraviolet (EUV) lithography is at a critical juncture. After several delays and glitches, [gettech id="31045" comment="EUV"] is now targeted for 7nm and/or 5nm. But there are still a number of technologies that must come together before EUV is inserted into mass production. And if the pieces don’t fall into place, EUV could slip again. First, the EUV source must generate more ... » read more

What Happened To Inverse Lithography?

By Mark LaPedus - 20 Oct, 2016 - Comments: 2

Nearly 10 years ago, the industry rolled out a potentially disruptive technique called inverse lithography technology (ILT). But ILT was ahead of its time, causing the industry to push out the technology and relegate it to niche-oriented applications. Today, though, ILT is getting new attention as the semiconductor industry pushes toward 7nm, and perhaps beyond. ILT is not a next-generation ... » read more

GPU Accelerated Computing

By D2S - 19 Oct, 2016 - Comments: 0

The computing applications used in semiconductor design and manufacturing have ever-increasing requirements for speed, accuracy and reliability. The continuation of Moore's Law creates a perpetual demand for greater accuracy as, with each new process node, larger numbers of increasingly smaller features are crowded onto each mask and wafer. Computing farms, where thousands of central processing... » read more

Deploying Multi-Beam Mask Writers

By Mark LaPedus - 22 Sep, 2016 - Comments: 3

Elmar Platzgummer, chief executive of IMS Nanofabrication, sat down with Semiconductor Engineering to discuss the company’s deal with Intel, photomasks, multi-beam mask writer technology and other topics. What follows are excerpts of that conversation. SE: This has been a significant year for IMS for two reasons. First, Intel recently announced plans to acquire IMS. Second, at the recent ... » read more

Mask Maker Worries Grow

By Mark LaPedus - 18 Aug, 2016 - Comments: 2

Leading-edge photomask makers face a multitude of challenges as they migrate from the 14nm node and beyond. Mask making is becoming more challenging and expensive at each node on at least two fronts. On one front, mask makers must continue to invest in the development of traditional optical masks at advanced nodes. On another front, several photomask vendors are preparing for the possible ra... » read more

Where Is Next-Gen Lithography?

By Mark LaPedus - 11 Apr, 2016 - Comments: 1

Semiconductor Engineering sat down to discuss lithography and photomask technologies with Greg McIntyre, director of the Advanced Patterning Department at Imec; Harry Levinson, senior fellow and senior director of technology research at GlobalFoundries; Uday Mitra, vice president and head of strategy and marketing for the Etch Business Unit and Patterning Module at Applied Materials; Naoya Haya... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: NuFlare