Experts At The Table: What’s Next?

By Ed Sperling - 21 Nov, 2013 - Comments: 1

Semiconductor Engineering sat down with Jim Hogan, long-time industry venture capitalist; Simon Bloch, senior director at Samsung Electronics; Sumit DasGupta, formerly Si2 senior vice president of engineering; and Mike Gianfagna, vice president of marketing at eSilicon (VP of corporate marketing at Atrenta when this roundtable was held). What follows are excerpts of that discussion. SE: What... » read more

Experts At The Table: 3D Stacking

By Ed Sperling - 14 Mar, 2011 - Comments: 0

By Ed Sperling Semiconductor Manufacturing and Design sat down with Riko Radojcic, director of engineering at Qualcomm; Drew Wingard, CTO at Sonics; Michael White, senior product marketing manager for Calibre physical verification at Mentor Graphics; Jim Hogan, a Silicon Valley venture capitalist; Prasad Subramaniam, vice president of design technology at eSilicon; and Mike Gianfagna, vice pr... » read more

Experts At The Table: 3D Stacking

By Ed Sperling - 25 Feb, 2011 - Comments: 0

Experts At The Table: 3D Stacking

By Ed Sperling - 14 Feb, 2011 - Comments: 0

3D Stacking: Reality Check

By Ed Sperling - 14 Feb, 2011 - Comments: 0

Semiconductor Manufacturing & Design examines the myth and reality of 3D stacking--and the hurdles that still need to be solved. In the hot seat: VC Jim Hogan; eSilicon's Prasad Subramanian; Sonics' Drew Wingard; Atrenta's Mike Gianfagna, and Mentor Graphics' Michael White. [youtube vid=fWQUGgwC-F4] » read more

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: Tela Ventures

Experts At The Table: What’s Next?

Experts At The Table: 3D Stacking

Experts At The Table: 3D Stacking

Experts At The Table: 3D Stacking

3D Stacking: Reality Check