tag: 10nm

Frenzy At 10/7nm
By Ann Mutschler - 14 Sep, 2017 - Comments: 1

The number of chipmakers rushing to 10/7nm is rising, despite a slowdown in Moore's Law scaling and the increased difficulty and cost of developing chips at the most advanced nodes. How long this trend continues remains to be seen. It's likely that 7/5nm will require new manufacturing equipment, tools, materials and transistor structures. Beyond that, there is no industry-accepted roadmap, m... » read more

Tech Talk: 7nm Thermal Effects
By Ed Sperling - 14 Sep, 2017 - Comments: 0

ANSYS' Karthik Srinivasan talks about the effect of heat on reliability at advanced process nodes, including self-heating, circuit aging, and how that will affect automotive electronics. https://youtu.be/SS6iAXp0Kn8   Related Tech Talk: 7nm Power Dealing with thermal effects, electromigration and other issues at the most advanced nodes. » read more

Machine Learning In The Fab
By Ed Sperling - 17 Aug, 2017 - Comments: 0

Machine learning is exploding, especially where there are massive amounts of data to contend with and lots of potential interactions. This leads to two obvious insertion points in the semiconductor field. One is on the design side, where just getting an advanced design to function is an enormous challenge. That challenge increases as the need for reliability in some market increases. It's d... » read more

What’s After FinFETs?
By Mark LaPedus - 24 Jul, 2017 - Comments: 3

Chipmakers are readying their next-generation technologies based on 10nm and/or 7nm finFETs, but it's still not clear how long the finFET will last, how long the 10nm and 7nm nodes for high-end devices will be extended, and what comes next. The industry faces a multitude of uncertainties and challenges at 5nm, 3nm and beyond. Even today, traditional chip scaling continues to slow as process ... » read more

Can A Supply Chain Be Too Efficient?
By Ed Sperling - 20 Jul, 2017 - Comments: 0

The semiconductor industry is a model of efficiency—literally. When other industries look at adding smart manufacturing into their operations, they often look to chip manufacturing as a shining example. After decades of business gyrations, semiconductor companies have figured out how to instill efficiency into every aspect of making chips. This is evident in device scaling. At 90nm, the co... » read more

Is 7nm The Last Major Node?
By Ed Sperling - 20 Jul, 2017 - Comments: 3

A growing number of design and manufacturing issues are prompting questions about what scaling will really look like beyond 10/7nm, how many companies will be involved, and which markets they will address. At the very least, node migrations will go horizontally before proceeding numerically. There are expected to be more significant improvements at 7nm than at any previous node, so rather th... » read more

Tech Talk: 7nm Litho
By Ed Sperling - 20 Jul, 2017 - Comments: 2

David Fried, chief technology officer at Coventor, digs into future scaling issues involving multi-patterning and new transistor types. https://youtu.be/FBnYRAL1xKY Related Stories Inside Next-Gen Transistors Coventor’s CTO looks at new types of transistors, the expanding number of challenges at future process nodes & the state of semiconductor development in China. Faster Time T... » read more

Filtering Out Fab Problems
By Mark LaPedus - 20 Jul, 2017 - Comments: 1

Bertrand Loy, president and CEO of Entegris, sat down to discuss the semiconductor industry, process challenges and filter technology with Semiconductor Engineering. What follows are excerpts of that conversation. SE: What is the outlook for the IC industry? Loy: A lot of positive things are happening. Eighty percent of what we do are consumables, which would be chemistries and filters. ... » read more

Transistor Aging Intensifies At 10/7nm And Below
By Ann Mutschler - 13 Jul, 2017 - Comments: 0

Transistor aging and reliability are becoming much more troublesome for design teams at 10nm and below. Concepts like ‘infant mortality’ and 'bathtub curves' are not new to semiconductor design, but they largely dropped out of sight as methodologies and EDA tools improved. To get past infant mortality, a burn-in process would be done, particularly for memories. And for reliability, which... » read more

Architecture First, Node Second
By Ed Sperling - 15 Jun, 2017 - Comments: 0

What a difference a node makes. A couple of rather important changes have occurred in the move from 16/14 to 10/7nm (aside from more confusing naming conventions). First, companies that require more transistors—processor companies such as [getentity id="22846" e_name="Intel"], AMD, [getentity id="22306" comment="IBM"] and [getentity id="22676" e_name="Qualcomm"]—have come to grips with t... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy