tag: 14nm

IP Integration Challenges Increase
By Ed Sperling - 24 Jun, 2015 - Comments: 0

Semiconductor Engineering sat down with Chris Rowen, CTO of [getentity id="22032" e_name="Cadence"]'s IP group; Rob Aitken, an [getentity id="22186" comment="ARM"] fellow; Patrick Soheili, vice president of product management and corporate development at [getentity id="22242" e_name="eSilicon"]; Navraj Nandra, senior director of marketing for DesignWare analog and mixed-signal IP at [getentity ... » read more

Foundries Expand Planar Efforts
By Mark LaPedus - 18 Jun, 2015 - Comments: 0

Competition is heating up in the leading-edge foundry business, as vendors begin to ramp up their new 16nm/14nm finFET processes. But that’s not the only action in the foundry arena. They are also expanding their efforts in the leading-edge planar market by rolling out new 28nm and 22nm processes. On one front, TSMC is offering new 28nm variants, based on bulk CMOS technology. And on an... » read more

Getting Over Overlay
By Mark LaPedus - 18 Jun, 2015 - Comments: 0

Chipmakers continue to migrate to the next node, but there are signs that traditional IC scaling is slowing down. So what’s causing the slowdown? Or for that matter, what could ultimately undo [getkc id="74" comment="Moore's Law"]? It could be a combination of factors. To be sure, IC design costs and complexity are soaring at each node. Scaling challenges are also playing a role. And ov... » read more

Managing Dynamic Power
By Ann Mutschler - 16 Jun, 2015 - Comments: 0

Working with finFETs is a study in contrasts. While leakage is now under control for the first time in several process generations due to the advent of different gate technology, dynamic power density caused by tightly packed transistors and higher clock speeds has become the big issue. “FinFET technology helps with reducing static/leakage power so when your logic is not active, you can sh... » read more

SoC Integration Headaches Grow
By Ed Sperling - 16 Jun, 2015 - Comments: 0

As the number of IP blocks grows, so do the headaches of integrating the various pieces and making sure they perform as planned within a prescribed power envelope. This is easier said than done, particularly at the most advanced process nodes. There are more blocks, more power domains, more states and use-model dependencies, and there is much more contention for memories. There are physical ... » read more

Analog’s Day Of Reckoning
By Brian Bailey - 16 Jun, 2015 - Comments: 0

The numbers being touted by the semiconductor industry for IoT edge devices are staggering. How they are going to be used, who will make them, or indeed who will make money from them are much less certain. The industry seems to be clear about the content of these devices. A small processor, some flash memory or possibly even some of the new memory technologies that are coming along, a radio ... » read more

Big Data Needs Bigger Memory
By Kilopass - 04 Jun, 2015 - Comments: 0

By Rodrigo Liang Over the last few decades, the semiconductor industry has focused its considerable technical investments in accelerating software applications. Performance metrics for new semiconductor products are often correlated with their ability to lower the latency to access data required to run specific software applications. The need for increased performance from semiconductors ... » read more

What’s Different At 16/14nm?
By Ed Sperling - 28 May, 2015 - Comments: 0

Will finFETs live up to their promise? It depends on whom you ask, when you ask that question, and the intended application of a design. But across the semiconductor industry, there is general agreement that it's getting easier to work at the most advanced nodes as tools and flows are better understood and overall experience increases. There is no question that [getkc id="185" kc_name="finFE... » read more

Design Virtualization And Its Impact On SoC Design
By eSilicon - 27 May, 2015 - Comments: 0

At advanced technology nodes (40nm and below), the number of options that a system-on-chip (SoC) designer faces is exploding. Choosing the correct combination of these options can have a dramatic impact on the quality, performance, cost and schedule of the final SoC. Using conventional design methodologies, it is very difficult to know if the correct options have been chosen. There is simply ... » read more

10nm Fab Challenges
By Mark LaPedus - 21 May, 2015 - Comments: 1

After a promising start in 2015, the semiconductor equipment industry is currently experiencing a slight lull. The pause is expected to be short-lived, however. Suppliers of [getkc id="208" comment="3D NAND"] devices are expected to add more fab capacity later this year. And about the same time, foundries are expected to order the first wave of high-volume production tools for 10nm. At 10nm... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy