tag: 2.5D

Thermal Floorplanning For Chips
By Brian Bailey - 10 Jun, 2021 - Comments: 0

Heat management is becoming crucial to an increasing number of chips, and it's one of a growing number of interconnected factors that must be considered throughout the entire development flow. At the same time, design requirements are exacerbating thermal problems. Those designs either have to increase margins or become more intelligent about the way heat is generated, distributed, and dissi... » read more

Advanced Packaging’s Next Wave
By Mark LaPedus - 20 May, 2021 - Comments: 0

Packaging houses are readying the next wave of advanced packages, enabling new system-level chip designs for a range of applications. These advanced packages involve a range of technologies, such as 2.5D/3D, chiplets, fan-out and system-in-package (SiP). Each of these, in turn, offers an array of options for assembling and integrating complex dies in an advanced package, providing chip custo... » read more

HBM Takes On A Much Bigger Role
By Brian Bailey - 13 May, 2021 - Comments: 1

High-bandwidth memory is getting faster and showing up in more designs, but this stacked DRAM technology may play a much bigger role as a gateway for both chiplet-based SoCs and true 3D designs. HBM increasingly is being viewed as a way of pushing heterogenous distributed processing to a completely different level. Once viewed as an expensive technology that only could be utilized in the hig... » read more

Making Chip Packaging More Reliable
By Mark LaPedus - 15 Apr, 2021 - Comments: 0

Packaging houses are readying the next wave of IC packages, but these products must prove to be reliable before they are incorporated into systems. These packages involve several advanced technologies, such as 2.5D/3D, chiplets and fan-out, but vendors also are working on new versions of more mature package types, like wirebond and leadframe technologies. As with previous products, packaging... » read more

Many Chiplet Challenges Ahead
By Brian Bailey - 12 Apr, 2021 - Comments: 0

Over the past couple of months, Semiconductor Engineering has looked into several aspects of 2.5D and 3D system design, the emerging standards and steps that the industry is taking to make this more broadly adopted. This final article focuses on the potential problems and what remains to be addressed before the technology becomes sustainable to the mass market. Advanced packaging is seen as ... » read more

What Goes Wrong In Advanced Packages
By Ed Sperling - 24 Mar, 2021 - Comments: 1

Advanced packaging may be the best way forward for massive improvements in performance, lower power, and different form factors, but it adds a whole new set of issues that were much better understood when Moore's Law and the ITRS roadmap created a semi-standardized path forward for the chip industry. Different advanced packaging options — system-in-package, fan-outs, 2.5D, 3D-IC — have a... » read more

The Future Of Transistors And IC Architectures
By Mark LaPedus - 18 Mar, 2021 - Comments: 1

Semiconductor Engineering sat down to discuss chip scaling, transistors, new architectures, and packaging with Jerry Chen, head of global business development for manufacturing & industrials at Nvidia; David Fried, vice president of computational products at Lam Research; Mark Shirey, vice president of marketing and applications at KLA; and Aki Fujimura, CEO of D2S. What follows are excerpt... » read more

Hunting For Open Defects In Advanced Packages
By Anne Meixner - 17 Mar, 2021 - Comments: 5

Catching all defects in chip packaging is becoming more difficult, requiring a mix of electrical tests, metrology screening, and various types of inspection. And the more critical the application for these chips, the greater the effort and the cost. Latent open defects continue to be the bane of test, quality, and reliability engineering. Open defects in packages occur at the chip-to-substra... » read more

Designing 2.5D Systems
By Brian Bailey - 15 Mar, 2021 - Comments: 0

As more designs hit the reticle limit, or suffer from decreasing yield, migrating to 2.5D designs may provide a path forward. But this kind of advanced packaging also comes with some additional challenges. How you adapt and change your design team may be determined by where your focus has been in the past, or what you are trying to achieve. There are business, organizational, and technical c... » read more

Ten Reasons 3D-IC Will Profoundly Change The Way You Design Electronics
By Marc Swinnen - 11 Mar, 2021 - Comments: 3

The history of electronic design has been defined by repeated waves of major technological change and accompanying business realignment. Many companies have foundered and disappeared when they were unable to anticipate and adjust to these powerful forces of change. Consequently, I am not alone in believing that now is the time to get ready for the next significant change to your electronic desi... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy