tag: 2.5D

Stepping Back From Scaling
By Ed Sperling - 24 Aug, 2016 - Comments: 0

Architectures, packaging and software are becoming core areas for semiconductor research and development, setting the stage for a series of shifts that will impact a large swath of the semiconductor industry. While there is still demand from the largest chipmakers for increased density at the next process node, the underlying economics for foundries, equipment vendors and IP developers are f... » read more

Faster Time To Yield
By Ed Sperling - 23 Aug, 2016 - Comments: 2

Michael Jamiolkowski, president and CEO of Coventor, sat down with Semiconductor Engineering to talk about ways improve yield ramp and optimize designs. What follows are excerpts of that conversation. SE: Why does it take so long to get a chip all the way through to manufacturing? Jamiolkowski: There are three parts to that. There is a research side. You want to be able to explore new th... » read more

Deeper Inside Intel
By Mark LaPedus - 22 Aug, 2016 - Comments: 5

Mark Bohr, senior fellow and director of process architecture and integration at Intel, and Zane Ball, vice president in the Technology and Manufacturing Group at Intel and co-general manager of Intel Custom Foundry, sat down with Semiconductor Engineering to discuss the future directions of transistors, process technology, the foundry business and packaging. What follows are excerpts of those ... » read more

How Small Will Transistors Go?
By Mark LaPedus - 18 Aug, 2016 - Comments: 1

By Mark LaPedus & Ed Sperling There is nearly universal agreement that Moore’s Law is slowing down. But whether it will truly end, or just become too expensive and less relevant—and what will supplant device scaling—are the subject of some far-reaching research and much discussion. Semiconductor Engineering sat down with each of the leaders of three top research houses—[getent... » read more

Designing SoC Power Networks
By Brian Bailey - 11 Aug, 2016 - Comments: 0

Designing a power network for a complex SoC is becoming critical for the success of the product, but most chips are still using old techniques that are ill-suited to the latest fabrication technologies, resulting in an expensive, overdesigned product. Not only is the power network as designed too large, but this has several knock-on effects that impact area, timing and power. In the first pa... » read more

Executive Insight: Jack Harding
By Ed Sperling - 03 Aug, 2016 - Comments: 0

[getperson id="11145" comment="Jack Harding"], president and CEO of [getentity id="22242" e_name="eSilicon"], sat down with Semiconductor Engineering to talk about consolidation, business relationships, what it will take to survive in the IoT age, and how to better optimize chips. What follows are excerpts of that conversation. SE: We’ve been looking at consolidation for a while and all th... » read more

Stacked Die Changes
By Ed Sperling - 27 Jul, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with David Pan, associate professor in the department of electrical and computer engineering at the University of Texas; Max Min, senior technical manager at Samsung; John Hunt, senior director of engineering at ASE; and Sitaram Arkalgud, vice president of 3D portfolio and technologies at Invensas. What follows are excerpts of tha... » read more

200mm Equipment Shortfall
By Mark LaPedus - 21 Jul, 2016 - Comments: 0

A surge in demand for consumer electronics, communications ICs, sensors and other products has created a shortage in 200mm fab capacity that shows no signs of abating. None of these chips need to be manufactured using the most advanced processes, and there have been enough tweaks to processes at established nodes to eke even more out of existing processes. But that has left chipmakers strugg... » read more

To 7nm And Beyond
By Ed Sperling - 21 Jul, 2016 - Comments: 4

Gary Patton, chief technology officer at [getentity id="22819" comment="GlobalFoundries"], and Thomas Caulfield, senior vice president and general manager of Fab 8, sat down with Semiconductor Engineering to discuss future directions in technology, including the next rev of FD-SOI, the future of Moore’s Law, and how some very public challenges will likely unfold. SE: What do you see as the... » read more

Building Faster Chips
By Ed Sperling - 21 Jul, 2016 - Comments: 5

By Ed Sperling and Jeff Dorsch An explosion in IoT sensor data, the onset of deep learning and AI, and the commercial rollout of augmented and virtual reality are driving a renewed interest in performance as the key metric for semiconductor design. Throughout the past decade in which mobility/smartphone dominated chip design, power replaced performance as the top driver. Processors ha... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy