tag: 20nm

Can Intel Dethrone The Foundry Giants?
By Mark LaPedus - 12 Dec, 2013 - Comments: 3

The leading-edge foundry business isn’t for the faint of heart. It requires deep pockets and sound technology to keep pace in the chip-scaling race. And despite pouring billions of dollars into new fabs and processes, foundries are competing for fewer customers at each node. Given the difficult business conditions, only a handful of vendors can afford to compete in the high-end foundry bus... » read more

New Challenges Emerge With FinFETs
By Ed Sperling - 05 Dec, 2013 - Comments: 0

Working at advanced process nodes is always tricky. There are new things to worry about and more rules to deal with initially, yet the promised benefit is improved performance, power and area, or cost. But at the next process node, and the one after that, there are so many variables coming into play that trying to make sense of the PPA equation is becoming much more difficult. Early reports ... » read more

Critical Choices
By Ed Sperling - 10 Oct, 2013 - Comments: 0

There’s been a lot of talk about what’s good enough. Is 10 hours of battery life enough? If the tradeoff is between a smaller battery and extra hour of battery life, which is more important? Those kinds of discussions are at the heart of consumer electronics. Ultra-thin smart phones are more attractive than fat ones, and they’re easier to put in your pocket. But a new kind of discussio... » read more

Why does EUV matter?
By Brian Bailey - 01 Oct, 2013 - Comments: 0

By Brian Bailey The end of Moore’s Law has been predicted for almost as long as the law has existed. It normally comes down to some great technological barrier that cannot be breached, only to find that a solution is just around the corner and the concerns fade until the next barrier is identified. At DAC this year (2013), there were many predictions about why Moore’s Law will end in th... » read more

What Can Go Wrong?
By Kurt Shuler - 25 Sep, 2013 - Comments: 0

It’s no surprise that most corporate system-on-chip (SoC) design teams are dispersed throughout the world, with different functional teams often located in different countries and continents. For example, we have many customers whose SoC architecture is defined in the United States, but subsystems such as graphics and signal processing are designed elsewhere. Companies choose this approach in... » read more

Power Grid Analysis Heats Up At 20nm
By Ann Mutschler - 12 Sep, 2013 - Comments: 0

By Ann Steffora Mutschler Do a simple Internet search for the term ‘power grid analysis’ and most of the results are academic sources. However, given the physics of either planar or finFET at 20nm and below, the power grid will see significant impacts. Overall, there are a number of technical implications of migrating from 28nm down to 20, 16 or 14 nm, with further impacts of moving fro... » read more

Experts At The Table: Challenges At 20nm
By Ed Sperling - 23 Aug, 2013 - Comments: 0

By Ed Sperling Low-Power/High-Performance Engineering sat down to discuss the challenges at 20nm and beyond with Jean-Pierre Geronimi, special projects director at STMicroelectronics; Pete McCrorie, director of product marketing for silicon realization at Cadence; Carey Robertson, director of product marketing at Mentor Graphics; and Isadore Katz, president and CEO of CLK Design Automation. Wh... » read more

Dealing With New Bottlenecks
By Ed Sperling - 11 Jul, 2013 - Comments: 0

By Ed Sperling While the number of options for improving efficiency and performance in designs continues to increase, the number of challenges in getting chips at advanced process nodes out the door is increasing, too. Thinner wires, routing congestion, more power domains, IP integration and lithography issues are conspiring to make design much more difficult than in the past. So why aren�... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 01 Jul, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: How are chipmakers working with the rest ... » read more

Experts At The Table: Changes In The Ecosystem
By Ed Sperling - 01 Jul, 2013 - Comments: 0

By Ed Sperling Semiconductor Manufacturing & Design sat down with Michael Buehler-Garcia, director of design solutions marketing at Mentor Graphics; Seow Yin Lim, group director for marketing at Cadence; Kevin Kranen, director of strategic alliances at Synopsys, and Tom Quan, director at TSMC. What follows are excerpts of that conversation. SMD: How are chipmakers working with the rest... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy