tag: DRC

Interface DRC Can Streamline Chip-Level Interface Physical Verification
By James Paris - 26 Apr, 2018 - Comments: 0

In most design companies, the chip-level physical implementation teams responsible for design floorplanning in place and route (P&R) environments also manage top-level physical verification from the early floorplanning stages through tapeout. In early floorplanning stages, blocks placed in the chip-level floorplan are usually still under development. Merging these incomplete blocks with the... » read more

EUV’s New Problem Areas
By Mark LaPedus - 19 Mar, 2018 - Comments: 2

Extreme ultraviolet (EUV) lithography is moving closer to production, but problematic variations—also known as stochastic effects—are resurfacing and creating more challenges for the long-overdue technology. GlobalFoundries, Intel, Samsung and TSMC hope to insert [gettech id="31045" comment="EUV"] lithography into production at 7nm and/or 5nm. But as before, EUV consists of several compo... » read more

A Reliability Baseline Is Essential For Today’s Complex IC Designs
By Matthew Hogan - 22 Feb, 2018 - Comments: 0

Design rule checking (DRC) represents a common platform by which we can all compare relative rule complexity. The industry expectation is that all foundries will provide complete DRC and layout vs. schematic (LVS) rule decks at all process nodes for the successful tape-out of IC designs. However, not only are DRC operations growing significantly (Figure 1), but the scope of the rules needed to ... » read more

The Week In Review: Design
By Jesse Allen - 19 Jan, 2018 - Comments: 0

M&A Barco Silex, now named Silex Inside, split from parent company Barco in a management buyout in partnership with a group of private investors lead by Dutch investment company Vehold BV. The company will continue its focus on security, video compression, and interface IP, along with design services. Tools & IP Mentor is making a version of its HyperLynx design rule checking tool ... » read more

Calibre Evolves Constantly
By Mike Santarini - 11 May, 2017 - Comments: 0

I find it truly amazing that despite the constantly changing tide in the digital IC design industry that some tools have remained in that number 1 spot for over a decade. The three tools that immediately come to mind are Synopsys’ PrimeTime and Design Compiler and Mentor’s Calibre. I remember back when I first started covering the industry in the mid-1990s that Quad Design’s Motive sta... » read more

Using Automated Pattern Matching For SRAM Physical Verification
By Elven Huang - 15 Dec, 2016 - Comments: 0

How often have you struggled to verify static random-access memory (SRAM) blocks in your design? And how often, no matter how much time you spend on them, do they end up causing manufacturing issues? Memory is a critical component in today’s SoC designs, often consuming 50% or more of the die area. SRAM blocks are typically assembled in a layout using a set of specific intellectual propert... » read more

Advanced Analog And Mixed Signal Design Continues Pushing The Design Envelope
By Paul Musto - 28 Jul, 2016 - Comments: 0

As PCB design has evolved into its present form with extremely complex boards housing high speed circuitry in very small areas, analog and mixed signal (AMS) and high speed analysis can address the latest design challenges. Analog/mixed signal design More and more products incorporate more than just digital circuitry. The vast majority of products now integrate digital and analog circuitr... » read more

Pattern Matching in Design and Verification
By Michael White - 19 May, 2016 - Comments: 0

Pattern matching (PM) was first introduced as the semiconductor industry began to shift from simple one-dimensional rule checks to the two-dimensional checks required by sub-resolution lithography. These rule checks proved far more complex to write, hard to code for fast runtimes, and difficult to debug. Incorporating an automated visual capture and compare process enabled designers to define t... » read more

Resetting Expectations On Multi-Patterning Decomposition And Checking
By David Abercrombie - 22 Oct, 2015 - Comments: 0

It never ceases to amaze me how much confusion and misunderstanding there is when it comes to multi-patterning (MP) decomposition and checking. I sometimes forget just how new a topic it is in our industry. Because of this short-lived history, and the limited time designers have had to acquire any detailed understanding of its complexity, there appears to be some serious disconnect in expectati... » read more

Raising The IQ Of Your MEMS-Based IC Design Flow
By Nicolas Williams - 15 Oct, 2015 - Comments: 0

By Nicolas Williams and Qi Jing Internet of Things (IoT) applications depend on smart objects that interact with the real world. So your IoT project is likely to contain ICs that integrate micro electro-mechanical systems (MEMS), such as accelerometers, pressure sensors, motors, and microphones that acquire data for analysis. These projects are finding their way into automobiles, phones, and... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy