Bringing Advanced Semiconductor Manufacturing Technologies To Higher Education

By Jimmy Gu - 17 Nov, 2016 - Comments: 0

Universities and other institutions of higher learning play a key role in developing our next generation of semiconductor technologies. Along with the theory of semiconductor technology, our next generation of scientists and engineers must learn about the practical methods used to design and manufacture the latest generation of semiconductor products. Recently, Coventor’s predictive, 3D proce... » read more

Creating An Accurate FEOL CMP Model

By Jeff Wilson - 20 Oct, 2016 - Comments: 0

By Ruben Ghulghazaryan, Jeff Wilson, and Ahmed AbouZeid For decades, semiconductor manufacturers have used chemical-mechanical polishing (CMP) as the primary technique for the smoothing and leveling (planarization) of dielectrics and metal layers. CMP modeling allows design and manufacturing teams to find and fix potential planarization issues before the actual CMP process is applied to a ... » read more

Cars, Security, And HW-SW Co-Design

By Jeff Dorsch - 31 Aug, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss parallel hardware/software design with Johannes Stahl, director of product marketing, prototyping and FPGA, [getentity id="22035" e_name="Synopsys"]; [getperson id="11411" comment="Bill Neifert"], director of models technology, [getentity id="22186" comment="ARM"]; Hemant Kumar, director of ASIC design, Nvidia; and Scott Constable, senior member of ... » read more

Does Power Analysis Need To Be Accurate?

By Ann Mutschler - 11 Aug, 2016 - Comments: 1

The mere mention of accuracy in power analysis and optimization today can trigger a contentious discussion, even among typically reserved engineers. What is needed and where? Which tools are truly as accurate as claimed? And how much accuracy is actually needed for power analysis, [getkc id="112" kc_name="estimation"], and optimization? First of all, the accuracy required really depends o... » read more

Models Are Dead? Long Live Models

By Frank Schirrmeister - 28 Jul, 2016 - Comments: 0

During the first half of this year I had more discussions with customers on models again. Are models back? For what purpose? In short, it looks like models are well adopted and in use for software development. For performance and architecture analysis, however, as a recent presentation from Renesas at CDNLive Japan shows, users just use RTL as that accuracy is required. In combination with emul... » read more

Hardware Models For Software

By Brian Bailey - 24 Nov, 2015 - Comments: 1

Shift left, while a relatively new term, has become important in all parts of the SoC design flow, but its impacts are wide ranging and many still ill defined. It basically means that tasks have to be started earlier than in the past because more accuracy is required from tasks that are further down in the flow in order to make better predictions. It also implies that more steps are performed c... » read more

Abstraction: Necessary But Evil

By Brian Bailey - 14 Oct, 2015 - Comments: 1

Abstraction allows aspects of a design to be described in an executable form much earlier in the flow. But some abstractions are breaking down, and an increasing amount of lower-level information has to be brought upstream in order to provide estimates that are close enough to reality so informed decisions can be made. The value of abstractions in design cannot be overstated. High levels of ... » read more

Virtual Prototyping Takes Off

By Ed Sperling - 06 Nov, 2014 - Comments: 0

Semiconductor Engineering sat down with Barry Spotts, senior core competency FAE for fabric and tools at [getentity id="22186" comment="ARM"]; Vasan Karighattam, senior director of architecture for SoC and SSW engineering at [getentity id="22664" e_name="Open-Silicon"]; Tom De Schutter, senior product marketing manager for Virtualizer Solutions at [getentity id="22035" e_name="Synopsys"]; Larry... » read more

Are Models Holding Back New Methodologies?

By Brian Bailey - 30 Oct, 2014 - Comments: 1

Semiconductor Engineering sat down to discuss the state of the industry for [getkc id="101" kc_name="modeling"] at abstractions above [getkc id="49" kc_name="RTL"], a factor which has delayed adoption of [getkc id="104" kn_name="virtual prototypes"] and the proliferation of system-level design and hardware/software codesign. Taking part in the discussion were Frank Schirrmeister, group director... » read more

Raising The IP Abstraction Level

By Ed Sperling - 25 Jul, 2013 - Comments: 0

By Ed Sperling An increasing reliance on commercial and re-used IP and more emphasis placed on software development is adding even more pressure onto semiconductor design teams to figure out the benefits and limitations of myriad possible choices earlier in the design process. Design teams already are under pressure to meet increasingly tighter market deadlines, and it is stressing every pa... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

tag: models