tag: Veeco

Week In Review: Manufacturing, Test
By Mark LaPedus - 13 Sep, 2019 - Comments: 0

Chipmakers and OEMs Delphi Technologies is in volume production with a 800 volt silicon carbide (SiC) inverter for next-generation electric and hybrid vehicles. The inverter extends electric vehicle (EV) ranges. It also halves the charging times compared with today's 400 volt systems. In a separate announcement, Delphi Technologies and Cree have announce a partnership to utilize SiC semicon... » read more

On The Cusp Of 5G
By Kevin Fogarty - 29 Aug, 2019 - Comments: 0

Carriers and chipmakers are celebrating the rollout of the first standards-compliant commercial 5G services. "We are, officially in the era of 5G," said John Smee, vice president of engineering at Qualcomm at the recent 5G Summit at IEEE's International Microwave Symposium (IMS) in Boston. Movement is happening on the commercial end. Major U.S. carriers Verizon, AT&T and Sprint have set ... » read more

Advanced Packaging Options Increase
By Ed Sperling - 19 Aug, 2019 - Comments: 0

Designing, integrating and assembling heterogeneous packages from blocks developed at any process node or cost point is proving to be far more difficult than expected, particularly where high performance is one of the main criteria. At least part of the problem is there is a spectrum of choices, which makes it hard to achieve economies of scale. Even where there is momentum for a particular ... » read more

GaN Versus Silicon For 5G
By Kevin Fogarty - 15 Aug, 2019 - Comments: 0

The global race to launch 5G mmWave frequencies could provide a long-anticipated market opportunity for gallium nitride (GaN) as an alternative to silicon. GaN is more power-efficient than silicon for 5G RF. In fact, GaN has been the heir apparent to silicon in 5G power amplifiers for years, especially when it comes to mmWave 5G networks. What makes it so attractive is its ability to efficie... » read more

The Next New Memories
By Mark LaPedus - 15 Aug, 2019 - Comments: 2

Several next-generation memory types are ramping up after years of R&D, but there are still more new memories in the research pipeline. Today, several next-generation memories, such as MRAM, phase-change memory (PCM) and ReRAM, are shipping to one degree or another. Some of the next new memories are extensions of these technologies. Others are based on entirely new technologies or involve ar... » read more

Intra-Field Stress Impact on Global Wafer Deformation
By Veeco - 14 Aug, 2019 - Comments: 0

One of the contributors to layer-to-layer overlay in today’s chip manufacturing process is wafer distortion due to thin film deposition. Mismatch in the film specific material parameters (e.g., thermal expansion coefficients) may result in process-induced warpage of the wafers at room temperature. When these warped wafers are loaded onto the scanner for the next layer exposure, in-plane disto... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 02 Aug, 2019 - Comments: 0

Trade wars Talks between the United States and China continue to stall and the two nations are still embroiled in a trade war. So this week, U.S. President Donald Trump would like to impose a 10% tariff on the remaining $300 billion list of China-based imports starting Sept. 1, according to a report from Reuters. This in turn will impact the electronics and IC industries. In response to the... » read more

Cloudy Outlook Seen For IC Biz
By Mark LaPedus - 29 Jul, 2019 - Comments: 0

After a slowdown in the first half of 2019, chipmakers and equipment vendors face a cloudy outlook for the second half of this year, with a possible recovery in 2020. Generally, the semiconductor industry began to see a slowdown starting in mid- to late-2018, which extended into the first half of 2019. During the first half of this year, memory and non-memory vendors were negatively impacted... » read more

Node Within A Node
By Ed Sperling - 24 Jul, 2019 - Comments: 0

Enough margin exists in manufacturing processes to carve out the equivalent of a full node of scaling, but shrinking that margin will require a collective push across the entire semiconductor manufacturing supply chain. Margin is built into manufacturing at various stages to ensure that chips are manufacturable and yield sufficiently. It can include everything from variation in how lines are... » read more

200mm Cools Off, But Not For Long
By Mark LaPedus - 18 Jul, 2019 - Comments: 4

After years of acute shortages, 200mm fab capacity is finally loosening up, but the supply/demand picture could soon change with several challenges on the horizon. 200mm fabs are older facilities with more mature processes, although they still churn out a multitude of today’s critical chips, such as analog, MEMS, RF and others. From 2016 to 2018, booming demand for these and other chips ca... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy