Outlook: DRAM, NAND, Next-Gen Memory

By Mark LaPedus - 18 Nov, 2021 - Comments: 0

Jim Handy, director at Objective Analysis, sat down with Semiconductor Engineering to talk about the 3D NAND, DRAM and next-generation memory markets. What follows are excerpts of that discussion. SE: How would you characterize the NAND market thus far in 2021? Handy: All chips are seeing unusual strength in 2021, but NAND flash and DRAM are doing what they usually do by exhibiting more e... » read more

The New Technology Solutions For Advanced SiP Devices

By YongJai Seo - 18 Nov, 2021 - Comments: 0

For many years, System-in-Package (SiP) technology has been a focus for semiconductor packaging to address the ongoing market trend of system integration and size reduction. Today’s increased complexity and higher package density for SiP devices has driven the development of new packaging technologies. In response, compartmental shield technology makes it possible to put several functions int... » read more

Using Process Modeling To Enhance Device Uniformity During Self-Aligned Quadruple Patterning

By Timothy Yang - 18 Nov, 2021 - Comments: 0

Despite the growing interest in EUV lithography, self-aligned quadruple patterning (SAQP) still holds many technical advantages in pattern consistency, simplicity, and cost. This is particularly true for very simple and periodic patterns, such as line & space patterns or hole arrays. The biggest challenge of SAQP is the inherently asymmetric mask shape. This asymmetry can create structural ... » read more

Failure Prediction Is Vital for Packaging Technology

By Sam Sadri - 18 Nov, 2021 - Comments: 0

A while back, I wrote a post on what I call the “10 Commandments of Packaging” – my list of the key things to bear in mind with respect to developing new packaging solutions. Today, packaging engineers must contend with more variables than ever, from new substrate materials to more types of packages with a greater range of complexity. With that complexity comes new challenges, and I felt ... » read more

Semiconductor Photomask Revenues Predicted To Increase In 2021

By Jan Willis - 18 Nov, 2021 - Comments: 0

A majority (72%) of industry luminaries surveyed in July predict an increase in photomask revenues for 2021, as shown in figure 1. SEMI also predicts revenues to increase around 9% from $4.4B in 2020 to $4.8B in 2021. In a 12-minute video, a panel of experts share their perspectives on what’s behind the growth trend, how the pandemic has impacted the photomask industry, and how it compares to... » read more

Workplace Safety Lessons From The Deepwater Horizon Oil Spill

By McKenzie Turner - 18 Nov, 2021 - Comments: 0

The Deepwater Horizon oil spill on April 20th, 2010, was the largest marine oil spill in history, marking a significant change in the oil industry and safety standards thereafter. What data do we have on the Deepwater Horizon oil spill? BP leased the oil rig, however, it was owned and operated by an offshore company called Transocean. The drilling reached a depth of nearly 1 mile, at 5,000 ... » read more

Apple’s First GaN Charger

By Stephen Russell - 18 Nov, 2021 - Comments: 1

It has been heavily rumored and anticipated for a few years now, but we have finally seen Apple make the switch to using gallium nitride (GaN) as the power transistor in one of their charging products: the 140 W charger for the new 16-inch MacBook Pro. As has been the case with many innovations in the past, Apple may not be the first, but when they do adopt a technology people take notice! A... » read more

A Broad Look Inside Advanced Packaging

By Mark LaPedus - 18 Nov, 2021 - Comments: 0

Choon Lee, chief technology officer of JCET, sat down with Semiconductor Engineering to talk about the semiconductor market, Moore’s Law, chiplets, fan-out packaging, and manufacturing issues. What follows are excerpts of that discussion. SE: Where are we in the semiconductor cycle right now? Lee: If you look at 2020, it was around 10% growth in the overall semiconductor industry. ... » read more

Chemistry Working For Lithography: The Marangoni-Effect-Based Single Layer For Enhanced Planarization

By Brewer Science - 17 Nov, 2021 - Comments: 0

In the field of semiconductor manufacturing, there is still a continuous search for techniques to improve the Critical Dimension Uniformity (CDU) across the wafer. CDU improvement and general defectiveness reduction increase the industrial yield and guarantee high reliability standards. In the KrF Dual-Damascene module integration, at a lithographic level, deep trench planarization is mandatory... » read more

Heterogeneous Integration Using Organic Interposer Technology

By Amkor - 17 Nov, 2021 - Comments: 0

As the costs of advanced node silicon have risen sharply with the 7 and 5-nanometer nodes, advanced packaging is coming to a crossroad where it is no longer fiscally prudent to pack all desired functionality into a single die. While single-die packages will still be around, the high-end market is shifting towards multiple-die packages to reduce overall costs and improve functionality. This shif... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.