category: Manufacturing, Packaging and Materials

category: IoT, Security & Automotive

The Future Of FinFETs At 5nm And Beyond
By Assawer Soussou - 05 Mar, 2021 - Comments: 0

While contact gate pitch (GP) and fin pitch (FP) scaling continues to provide higher performance and lower power to finFET platforms, controlling RC parasitics and achieving higher transistor performance at technology nodes of 5nm and beyond becomes challenging. In collaboration with Imec, we recently used SEMulator3D virtual fabrication to explore an end-to-end solution to better underst... » read more

Manufacturing Bits: March 2
By Mark LaPedus - 02 Mar, 2021 - Comments: 0

Next-gen AFM At the recent SPIE Advanced Lithography conference, Imec, Infinitesima and others described a new metrology tool technology called a Rapid Probe Microscope (RPM). Infinitesima has shipped its first RPM 3D system, enabling three-dimensional (3D) metrology applications for leading-edge chips. The system was jointly developed with Imec. In the IEDM paper, Imec and Infinitesima... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 26 Feb, 2021 - Comments: 0

Chipmakers and OEMs Several chipmakers have not resumed production in their fabs in Texas for the second consecutive week. This follows power outages due to a major winter storm. As reported, a severe winter storm hit many parts of the United States, including Texas. Last week, utility providers began to prioritize service to residential areas in Austin, Texas. As a result, electricity and ... » read more

Manufacturing Bits: Feb. 23
By Mark LaPedus - 23 Feb, 2021 - Comments: 0

Space crystals Northrop Grumman recently launch its Cygnus spacecraft into space, sending thousands of pounds of critical supplies and experiments to the International Space Station (ISS). The launch, which took place from NASA’s Wallops Flight Facility in Virginia, will deliver a diversity of experiments to the ISS National Laboratory. In one experiment, Redwire’s sixth in-space man... » read more

Brazil Paves New Semiconductor Path
By Mark LaPedus - 22 Feb, 2021 - Comments: 3

After struggling to get its semiconductor industry off the ground for the last several years, Brazil finally may have found its place in the market with the development of IC design services, memory modules and packaging. Brazil exists well under the radar when it comes to semiconductors. But with little or no fanfare, the nation over the years has been trying to build fabs, assemble chips a... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 19 Feb, 2021 - Comments: 0

Chipmakers and OEMs A severe winter storm has hit many parts of the United States, including Texas. In Austin, utility providers are prioritizing service to residential areas. As a result, electricity and natural gas providers have temporarily suspended service to Austin’s semiconductor manufacturers, including Samsung and NXP. "Due to the recent blackouts in Texas, Samsung Austin Semicon... » read more

More Silicon Wafer Consolidation
By Mark LaPedus - 18 Feb, 2021 - Comments: 0

The silicon wafer business typically flies under the radar, but it’s a fundamental part of the semiconductor business. Every chipmaker needs to buy silicon wafers in one size or another. In the supply chain, silicon wafer vendors produce and sell bare or raw silicon wafers to chipmakers, who in turn process them into chips. So it’s important to keep an eye on the market. Today, the s... » read more

Shortages, Challenges Engulf Packaging Supply Chain
By Mark LaPedus - 18 Feb, 2021 - Comments: 0

A surge in demand for chips is impacting the IC packaging supply chain, causing shortages of select manufacturing capacity, various package types, key components, and equipment. Spot shortages in packaging surfaced in late 2020 and have since spread to other sectors. There are now a variety of choke points in the supply chain. Wirebond and flip-chip capacity will remain tight throughout 2021... » read more

Increasing The Conductive Density Of Packaging
By Shaun Bowers - 18 Feb, 2021 - Comments: 0

Wide bandgap (WBG) semiconductor technologies have created new challenges and opportunities for power packages. Developments such as silicon carbide (SiC) and gallium nitride (GaN), have a higher figure of merit (FOM) compared to silicon MOSFETs and have extended the efficiency, output power and/or switching frequency range and operating temperature range for power electronics. With lower lo... » read more

Packaging Demands For RF And Microwave Devices
By Ken Molitor - 18 Feb, 2021 - Comments: 1

RF and microwave integrated circuits (ICs), monolithic microwave ICs (MMICs) and systems in package (SiPs) are vital for a wide range of applications. These include mobile phones, wireless local-area networks (WLANs), ultra-wideband (UWB), internet-of-things (IoT), GPS and Bluetooth devices. Moreover, RF-optimized packaging products and processes are essential to enabling the 5G ramp-up. RFI... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy