category: Top Stories

category: IoT, Security & Automotive

Going On the Edge
By Mark LaPedus - 27 Jan, 2020 - Comments: 3

Emmanuel Sabonnadière, chief executive of Leti, sat down with Semiconductor Engineering to talk about artificial intelligence (AI), edge computing and chip technologies. What follows are excerpts of that conversation. SE: Where is AI going in the future? Sabonnadière: I am a strong believer that edge AI will change our lives. Today’s microelectronics are organized with 80% of things i... » read more

SiC Foundry Business Emerges
By Mark LaPedus - 23 Jan, 2020 - Comments: 1

Several third-party foundry vendors are entering or expanding their efforts in the silicon carbide (SiC) business amid booming demand for the technology. However, making a significant dent in the market will not be so easy for SiC foundry vendors and their customers. They are facing stiff competition from traditional SiC device vendors such as Cree, Infineon, Rohm and STMicroelectronics. ... » read more

Finding Defects In EUV Masks
By Mark LaPedus - 23 Jan, 2020 - Comments: 0

Extreme ultraviolet (EUV) lithography is finally in production at advanced nodes, but there are still several challenges with the technology, such as EUV mask defects. Defects are unwanted deviations in chips, which can impact yield and performance. They can crop up during the chip manufacturing process, including the production of a mask or photomask, sometimes called a reticle. Fortunately... » read more

5/3nm Wars Begin
By Mark LaPedus - 23 Jan, 2020 - Comments: 6

Several foundries are ramping up their new 5nm processes in the market, but now customers must decide whether to design their next chips around the current transistor type or move to a different one at 3nm and beyond. The decision involves the move to extend today’s finFETs to 3nm, or to implement a new technology called gate-all-around FETs (GAA FETs) at 3nm or 2nm. An evolutionary step f... » read more

Where Technology Breakthroughs Are Needed
By Mark LaPedus - 23 Dec, 2019 - Comments: 2

After years of delays, extreme ultraviolet (EUV) lithography is finally in production at the 7nm logic node with 5nm in the works. EUV, a next-generation lithography technology, certainly will help chipmakers migrate to the next nodes. But EUV doesn’t solve every problem. Nor does it address all challenges in the semiconductor industry. Not by a long shot. To be sure, the industry needs... » read more

Finding Defects In IC Packages
By Mark LaPedus - 17 Dec, 2019 - Comments: 0

Several equipment makers are ramping up new inspection equipment to address the growing defect challenges in IC packaging. At one time, finding defects in packaging was relatively straightforward. But as packaging becomes more complex, and as it is used in markets where reliability is critical, finding defects is both more difficult and more important. This has prompted the development of a ... » read more

New Packaging Roadmap
By Katherine Derbyshire - 17 Dec, 2019 - Comments: 3

Historically, the electronics industry has drawn sharp distinctions between the integrated circuit chip, the package that protects it from the environment, and the board that connects it to other devices in a complete system. The circuit and systems worlds have been largely isolated from each other, using different tools, different processes, and different metrics for success. While integrated ... » read more

What’s Next For High Bandwidth Memory
By Mark LaPedus - 17 Dec, 2019 - Comments: 1

A surge in data is driving the need for new IC package types with more and faster memory in high-end systems. But there are a multitude of challenges on the memory, packaging and other fronts. In systems, for example, data moves back and forth between the processor and DRAM, which is the main memory for most chips. But at times this exchange causes latency and power consumption, sometimes re... » read more

Multi-Patterning EUV Vs. High-NA EUV
By Mark LaPedus - 04 Dec, 2019 - Comments: 4

Foundries are finally in production with EUV lithography at 7nm, but chip customers must now decide whether to implement their next designs using EUV-based multiple patterning at 5nm/3nm or wait for a new single-patterning EUV system at 3nm and beyond. This scenario revolves around ASML’s current extreme ultraviolet (EUV) lithography tool (NXE:3400C) versus a completely new EUV system with... » read more

Making And Protecting Advanced Masks
By Mark LaPedus - 27 Nov, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss lithography and photomask trends with Bryan Kasprowicz, director of technology and strategy and a distinguished member of the technical staff at Photronics; Thomas Scheruebl, director of strategic business development and product strategy at Zeiss; Noriaki Nakayamada, senior technologist at NuFlare; and Aki Fujimura, chief executive of D2S. What fol... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy