tag: 10nm

Gaps In Performance, Power Coverage
By Brian Bailey - 15 Oct, 2015 - Comments: 0

The semiconductor industry always has used metrics to define progress, and in areas such as functional verification significant advances have been made. But so far, no effective metrics have been developed for power, performance, or other system-level concerns, which basically means that design teams have to run blind. On the plus side, the industry has migrated from the use of code coverage... » read more

Executive Insight: Lip-Bu Tan
By Ed Sperling - 01 Oct, 2015 - Comments: 1

Lip-Bu Tan, president and CEO of Cadence, sat down with Semiconductor Engineering to talk about consolidation, Moore's Law, and where the opportunities are in the IoT and automotive markets. What follows are excerpts of that conversation. SE: What are the big concerns for the semiconductor industry in general, and EDA in particular? Tan: Top on my list is all the consolidation that's goin... » read more

Pick A Number
By Ed Sperling - 24 Sep, 2015 - Comments: 0

For the past two years there was some mumbling that 16/14nm would be short-lived, and that 10nm would be the place that foundries would invest heavily. Now the buzz is that 10nm may be skipped entirely and the next node will be 7nm. After all, 10nm is really only a half-node. Or is it? The answer depends on who's defining 10nm. The 16/14nm node is based on a 20nm back-end-of-line process, un... » read more

Mask Supply Chain Preps For 10nm
By Dylan McGrath - 17 Sep, 2015 - Comments: 0

As the semiconductor industry gears up for the 10nm logic node—now likely to begin in the second half of 2017—the photomask supply chain is preparing to grapple with the associated challenges, including dramatic increases in photomask complexity, write times and data volumes. The 10nm node will require more photomasks per mask set, the ability to print smaller and more complex features, ... » read more

ALD Market Heats Up
By Mark LaPedus - 17 Sep, 2015 - Comments: 1

Amid the shift to 3D NAND, finFETs and other device architectures, the atomic layer deposition (ALD) market is heating up on several fronts. Applied Materials, for example, recently moved to shakeup the landscape by rolling out a new, high-throughput ALD tool. Generally, [getkc id="250" kc_name="ALD"] is a process that deposits materials layer-by-layer at the atomic level, enabling thin and ... » read more

EUV: Cost Killer Or Savior?
By Katherine Derbyshire - 17 Sep, 2015 - Comments: 4

Moore’s Law, the economic foundation of the semiconductor industry, states that transistor density doubles in each technology generation, at constant cost. As IMEC’s Arindam Mallik explained, however, the transition to a new technology node is not a single event, but a process. Typically, when the new technology is first introduced, it brings a 20% to 25% wafer cost increase. Process opt... » read more

Patterning Interconnects At 10nm And Below
By Applied Materials - 20 Aug, 2015 - Comments: 0

By Connie Duncan Chip manufacturers today build billions of transistors on a chip, delivering incredible computing power to consumers. What often gets overlooked is how hard it’s getting to create the many miles of ultra-thin copper wiring used to connect each of the transistors. Patterning these electrical pathways is becoming increasingly challenging as they grow denser and finer, and any ... » read more

Tech Talk: 10nm Patterning
By Brian Bailey - 20 Aug, 2015 - Comments: 0

David Abercrombie, advanced physical verification methodology program manager at Mentor Graphics, talks about triple and quadruple patterning after 20/16/14nm and what design teams need to understand to get this right. [youtube vid=7bjutPWakpw] » read more

Moving Electrons Is Getting Harder
By Ed Sperling - 13 Aug, 2015 - Comments: 1

Numerous executives across the ecosystem—from EDA and equipment companies to foundries—recently have stated that Moore's Law has at least 10 more years of life. This is interesting math, considering the semiconductor industry is now working on 10nm, with chips expected to roll out next year. So given that Moore's Law is on a two-year cadence of doubling the number of transistors every 24... » read more

How Long Will FinFETs Last?
By Ann Mutschler - 13 Aug, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss how long FinFETs will last and where we will we go next with Vassilios Gerousis, Distinguished Engineer at [getentity id="22032" e_name="Cadence"]; Juan Rey, Sr. Director of Engineering for Calibre R&D at [getentity id="22017" e_name="Mentor Graphics"]; Kelvin Low, Senior Director Foundry Marketing at [getentity id="22865" e_name="Samsung"]; and Vic... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy