tag: 3D-IC

Who Benefits From Chiplets, And When
By Ed Sperling - 31 May, 2022 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss new packaging approaches and integration issues with Anirudh Devgan, president and CEO of Cadence; Joseph Sawicki, executive vice president of Siemens EDA; Niels Faché, vice president and general manager at Keysight; Simon Segars, advisor at Arm; and Aki Fujimura, chairman and CEO of D2S. This discussion was held in front of a... » read more

New End Markets, More Demand For Complex Chips
By Ed Sperling - 16 May, 2022 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss economic conditions and how that affects chip design with Anirudh Devgan, president and CEO of Cadence; Joseph Sawicki, executive vice president of Siemens EDA; Niels Faché, vice president and general manager at Keysight; Simon Segars, advisor at Arm; and Aki Fujimura, chairman and CEO of D2S. This discussion was held in front... » read more

Artificial intelligence deep learning for 3D IC reliability prediction
By Technical Paper Link - 25 Apr, 2022 - Comments: 0

New research from National Yang Ming Chiao Tung University, National Center for High-Performance Computing (Taiwan), Tunghai University, MA-Tek Inc, and UCLA. Abstract "Three-dimensional integrated circuit (3D IC) technologies have been receiving much attention recently due to the near-ending of Moore’s law of minimization in 2D IC. However, the reliability of 3D IC, which is greatly infl... » read more

Planning EDA’s Next Steps
By Ed Sperling - 24 Mar, 2022 - Comments: 0

Anirudh Devgan, Cadence's new CEO, and the recipient of the Phil Kaufman Award in December, sat down with Semiconductor Engineering to talk about what's next in EDA, the underlying technology and business challenges and changes, and new markets that are unfolding for floor-planning, verification, CFD, and advanced packaging. SE: Where does EDA need to improve? Devgan: We have made it much... » read more

Unintended Coupling Issues Grow
By Brian Bailey - 24 Feb, 2022 - Comments: 0

The number of indirect and often unexpected ways in which one design element may be affected by another is growing, making it more difficult to ensure a chip — or multiple chips in a package — will perform reliably. Long gone are the days when the only way that one part of a circuit could influence another was by an intended wire connecting them. As geometries get smaller, frequencies go... » read more

Dissolving The Barriers In Multi-Substrate 3D-IC Assembly Design
By Tarek Ramadan - 24 Feb, 2022 - Comments: 0

Advanced packaging continues to promise improved form factor, cost, performance, and functionality compared to the traditional transistor scaling on SoCs. This is done by integrating multiple dies on top of a substrate (organic or silicon). Besides multiple dies, multiple substrates can typically exist in a 3D-IC assembly. In this case, the benefits of advanced packaging are taken to a whole ne... » read more

Technology Advances, Shortages Seen For Wire Bonders
By Mark LaPedus - 17 Feb, 2022 - Comments: 2

A surge in demand for IC packages is causing long lead times for wire bonders, which are used to assemble three-fourths of the world’s packages. The wire bonder market doubled last year, alongside advanced packaging’s rise. Wirebonding is an older technology that typically flies under the radar. Still, packaging houses have multitudes of these key tools that help assemble many — but no... » read more

3D-IC: Great Opportunities, Great Challenges
By John Lee - 17 Feb, 2022 - Comments: 0

The growing adoption of 2.5D and 3D integrated circuits (3D-ICs) marks a major inflection point in the world of semiconductor design. Electronic designers demand greater integration densities and faster data transfer rates to meet the growing performance requirements of AI/ML, 5G/6G networks and autonomous vehicles as these technologies have outpaced the capabilities of any single chip. 3D-IC t... » read more

Preparing For 3D-ICs
By Ed Sperling - 16 Feb, 2022 - Comments: 1

Experts at the Table: Semiconductor Engineering sat down to discuss the changes in design tools and methodologies needed for 3D-ICs, with Sooyong Kim, director and product specialist for 3D-IC at Ansys; Kenneth Larsen, product marketing director at Synopsys; Tony Mastroianni, advanced packaging solutions director at Siemens EDA; and Vinay Patwardhan, product management group director at Cadence... » read more

Design Challenges Increasing For Mixed-Die Packages
By Ann Mutschler - 09 Feb, 2022 - Comments: 0

The entire semiconductor ecosystem is starting to tackle a long list of technology and business changes that will be needed to continue scaling beyond Moore's Law, making heterogeneous combinations of die easier, cheaper, and more predictable. There are a number of benefits to mixing die and putting them together in a modular way. From a design standpoint, this approach provides access to th... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy