tag: 3D-IC

Challenges With Stacking Memory On Logic
By Ed Sperling - 22 Dec, 2021 - Comments: 1

Experts at the Table: Semiconductor Engineering sat down to discuss the changes in design tools and methodologies needed for 3D-ICs, with Sooyong Kim, director and product specialist for 3D-IC at Ansys; Kenneth Larsen, product marketing director at Synopsys; Tony Mastroianni, advanced packaging solutions director at Siemens EDA; and Vinay Patwardhan, product management group director at Cadence... » read more

Taking 2.5D/3DIC Physical Verification To The Next Level
By Siemens EDA - 21 Dec, 2021 - Comments: 0

As package designs evolve, so do verification requirements and challenges. Designers working on multi-die, multi-chiplet stacked configurations in 2.5/3D IC designs can use Calibre 3DSTACK physical verification checks to verify die alignments for proper connectivity and electrical behavior. The Calibre 3DSTACK precheck mode enables design teams to find and correct basic implementation mistakes ... » read more

Manufacturing Bits: Dec. 14
By Mark LaPedus - 14 Dec, 2021 - Comments: 0

3D-SOCs At this week’s IEEE International Electron Devices Meeting (IEDM), a plethora of companies, R&D organizations and universities presented papers on the latest and greatest technologies. One of the themes at IEDM is advanced packaging, a technology enables an IC vendor to boost the performance of a chip. Advanced forms of packaging also enables new 3D-like chip architectures. Fo... » read more

Advanced Packaging For Automotive Chips
By Ann Mutschler - 02 Dec, 2021 - Comments: 0

Multiple types of chips may be better than one for dealing with large amounts and different types of data, but in automotive applications it's not entirely clear how or even whether they should be packaged together. The biggest problem with electronics in vehicles is the extreme range of temperatures, both within and outside of vehicles. Without adequate cooling, chips can age prematurely, s... » read more

Advanced Packaging Shifts Design Focus To System Level
By Ann Mutschler - 23 Nov, 2021 - Comments: 0

Growing momentum for advanced packaging is shifting design from a die-centric focus toward integrated systems with multiple die, but it's also straining some EDA tools and methodologies and creating gaps in areas where none existed. These changes are causing churn in unexpected areas. For some chip companies, this has resulted in a slowdown in hiring of ASIC designers and an uptick in new jo... » read more

What’s Missing For Designing Chips At The System Level
By Ed Sperling - 01 Nov, 2021 - Comments: 0

Semiconductor Engineering sat down to talk about design challenges in advanced packages and nodes with John Lee, vice president and general manager for semiconductors at Ansys; Shankar Krishnamoorthy, general manager of Synopsys' Design Group; Simon Burke, distinguished engineer at Xilinx; and Andrew Kahng, professor of CSE and ECE at UC San Diego. This discussion was held at the Ansys IDEAS co... » read more

Partitioning For Better Performance And Power
By Ann Mutschler - 28 Oct, 2021 - Comments: 0

Partitioning is becoming more critical and much more complex as design teams balance different ways to optimize performance and power, shifting their focus from a single chip to a package or system involving multiple chips with very specific tasks. Approaches to design partitioning have changed over the years, most recently because processor clock speeds have hit a wall while the amount of d... » read more

3D-IC Design Challenges And Requirements
By Cadence - 27 Oct, 2021 - Comments: 0

As demands accelerate for increasing density, higher bandwidths, and lower power, many IC design and packaging teams are taking a close look at vertical stacking multiple chips and chiplets. This technology, called 3D-IC, promises many advantages over traditional single-die planar designs. Some are using the term “More-than-Moore” to describe the potential of this new technology. Integratio... » read more

Scaling Bump Pitches In Advanced Packaging
By Mark LaPedus - 25 Oct, 2021 - Comments: 0

Interconnects for advanced packaging are at a crossroads as an assortment of new package types are pushing further into the mainstream, with some vendors opting to extend the traditional bump approaches while others roll out new ones to replace them. The goal in all cases is to ensure signal integrity between components in IC packages as the volume of data being processed increases. But as d... » read more

Rising Fortunes For ICs In Health Care
By Susan Rambo - 13 Oct, 2021 - Comments: 0

Semiconductors are increasingly finding their way into a variety of medical devices, after years of slow growth and largely consumer electronics types of applications. Nearly every major chipmaker has a toehold in health care these days, and many are starting to look beyond wearable such as the Apple Watch to devices that can be relied on for accuracy and reliability. Unlike in the past, the... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy