Making Connections In 3D Heterogeneous Integration

By Ann Mutschler - 26 Oct, 2023 - Comments: 0

Activity around 3D heterogeneous integration (3DHI) is heating up, driven by growing support from governments, the need to add more features and compute elements into systems, and a widespread recognition that there are better paths forward than packing everything into a single SoC at the same process node. The leading edge of chip design has changed dramatically over the last few years. Int... » read more

Everyone’s A System Designer With Heterogeneous Integration

By Ann Mutschler - 02 Oct, 2023 - Comments: 0

The move away from monolithic SoCs to heterogeneous chips and chiplets in a package is accelerating, setting in motion a broad shift in methodologies, collaborations, and design goals that are felt by engineers at every step of the flow, from design through manufacturing. Nearly every engineer is now working or touching some technology, process, or methodology that is new. And they are inter... » read more

Why Chiplets Don’t Work For All Designs

By Ed Sperling - 20 Sep, 2023 - Comments: 0

Experts at the Table: Semiconductor Engineering sat down to discuss use cases and challenges for commercial chiplets with Saif Alam, vice president of engineering at Movellus; Tony Mastroianni, advanced packaging solutions director at Siemens Digital Industries Software; Mark Kuemerle, vice president of technology at Marvell; and Craig Bishop, CTO at Deca Technologies. What follows are excerpts... » read more

Distributed Batteries Within A Heterogeneous 3D IC To Optimize Performance

By Technical Paper Link - 28 Aug, 2023 - Comments: 0

A technical paper titled “On-Chip Batteries as Distributed Energy Sources in Heterogeneous 2.5D/3D Integrated Circuits” was published by researchers at University of Florida and Brookhaven National Laboratory. Abstract: "Energy efficiency in digital systems faces challenges due to the constraints imposed by small-scale transistors. Moreover, the growing demand for portable consumer electr... » read more

Processor Tradeoffs For AI Workloads

By Ann Mutschler - 10 Aug, 2023 - Comments: 0

AI is forcing fundamental shifts in chips used in data centers and in the tools used to design them, but it also is creating gaps between the speed at which that technology advances and the demands from customers. These shifts started gradually, but they have accelerated and multiplied over the past year with the rollout of ChatGPT and other large language models. There is suddenly much more... » read more

Chiplets: Deep Dive Into Designing, Manufacturing, And Testing

By The SE Staff - 07 Aug, 2023 - Comments: 0

Chiplets are a disruptive technology. They change the way chips are designed, manufactured, tested, packaged, as well as the underlying business relationships and fundamentals. But they also open the door to vast new opportunities for existing chipmakers and startups to create highly customized components and systems for specific use cases and market segments. This LEGO-like approach sounds ... » read more

Smarter Systems Through Heterogeneous Integration: Highlights From 3D & Systems Summit

By Cassandra Melvin - 25 Jul, 2023 - Comments: 0

It has taken decades of research and development and strong commitment to various industry programs, but the stars are finally aligning for 3D semiconductor systems. No one could have left the 3D & Systems Summit 2023 – held in late June in Dresden – with any doubt that heterogeneous integration, enabled by increasingly mature 3D packaging technologies, is becoming a key driver of the s... » read more

Better Choreography Required For Complex Chips

By Karen Heyman - 22 Jun, 2023 - Comments: 0

The rapidly growing number of features and options in chip design are forcing engineering teams to ratchet up their planning around who does what, when it gets done, and how various components will interact. In effect, more elements in the design flow need to be choreographed much more precisely. Some steps have to shift further left, while others need to be considered earlier in the plannin... » read more

3DICs: Legalizer Techniques For Better Routing Quality, Fewer DRVs, And Reduced Total Slack With Negligible Runtime Impact

By Technical Paper Link - 07 Jun, 2023 - Comments: 0

A technical paper titled “On Legalization of Die Bonding Bumps and Pads for 3D ICs” was published by researchers at the Georgia Institute of Technology, NVIDIA Corporation, and the University of Bremen. Abstract "State-of-the-art 3D IC Place-and-Route flows were designed with older technology nodes and aggressive bonding pitch assumptions. As a result, these flows fail to honor the widt... » read more

Photonic Debond: Scalability And Advancements

By Brewer Science - 17 May, 2023 - Comments: 0

Advanced packaging technology has continuously evolved over the past 10-20 years to become a major driving force in improving integrated circuit (IC) performance. This improvement in IC performance is assisted by the ability to place specialized components near each other for shorter interconnects in the IC packages. Temporary bond and debond (TB/DB) is an enabling technique for this work. TB/D... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

NAND Flash Targets 1,000 Layers

New techniques go beyond improved deposition and etching, but challenges stack up, too.

by Bryon Moyer

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.

by Ed Sperling

Defining The Chiplet Socket

The industry may have started with the wrong approach for enabling a third-party chiplet ecosystem, but who will step in and fix it?

by Brian Bailey

tag: 3D-IC

Making Connections In 3D Heterogeneous Integration

Everyone’s A System Designer With Heterogeneous Integration

Why Chiplets Don’t Work For All Designs

Distributed Batteries Within A Heterogeneous 3D IC To Optimize Performance

Processor Tradeoffs For AI Workloads

Chiplets: Deep Dive Into Designing, Manufacturing, And Testing

Smarter Systems Through Heterogeneous Integration: Highlights From 3D & Systems Summit

Better Choreography Required For Complex Chips

3DICs: Legalizer Techniques For Better Routing Quality, Fewer DRVs, And Reduced Total Slack With Negligible Runtime Impact

Photonic Debond: Scalability And Advancements

Trending Articles

NAND Flash Targets 1,000 Layers

Testing For Thermal Issues Becomes More Difficult

Auto Chip Aging Accelerates In Hot Climates

Is In-Memory Compute Still Alive?

Baby Steps Toward 3D DRAM

Knowledge Centers
Entities, people and technologies explored