tag: 7nm

Deeper Inside Intel
By Mark LaPedus - 22 Aug, 2016 - Comments: 5

Mark Bohr, senior fellow and director of process architecture and integration at Intel, and Zane Ball, vice president in the Technology and Manufacturing Group at Intel and co-general manager of Intel Custom Foundry, sat down with Semiconductor Engineering to discuss the future directions of transistors, process technology, the foundry business and packaging. What follows are excerpts of those ... » read more

Fins And Wires – How Do We Get To 5nm?
By Mike Chudzik - 18 Aug, 2016 - Comments: 0

As the industry moves beyond 10nm to the 7nm and 5nm nodes, fundamental shifts are needed to address scaling challenges. Among the priority concerns driving industry changes, particularly with respect to materials and architecture, is the impact on transistor performance from rising parasitic resistance and parasitic capacitance or RC. I spoke about this industry dilemma recently at the SEMICON... » read more

How Small Will Transistors Go?
By Mark LaPedus - 18 Aug, 2016 - Comments: 1

By Mark LaPedus & Ed Sperling There is nearly universal agreement that Moore’s Law is slowing down. But whether it will truly end, or just become too expensive and less relevant—and what will supplant device scaling—are the subject of some far-reaching research and much discussion. Semiconductor Engineering sat down with each of the leaders of three top research houses—[getent... » read more

Mask Maker Worries Grow
By Mark LaPedus - 18 Aug, 2016 - Comments: 2

Leading-edge photomask makers face a multitude of challenges as they migrate from the 14nm node and beyond. Mask making is becoming more challenging and expensive at each node on at least two fronts. On one front, mask makers must continue to invest in the development of traditional optical masks at advanced nodes. On another front, several photomask vendors are preparing for the possible ra... » read more

What Transistors Will Look Like At 5nm
By Mark LaPedus - 18 Aug, 2016 - Comments: 3

Chipmakers are currently ramping up 16nm/14nm finFET processes, with 10nm and 7nm just around the corner. The industry also is working on 5nm. TSMC hopes to deliver a 5nm process by 2020. GlobalFoundries, Intel and Samsung are doing R&D for that node. But 5nm technology presents a multitude of unknowns and challenges. For one thing, the exact timing and specs of 5nm remain cloudy. The... » read more

Optimization Challenges For 10nm And 7nm
By Brian Bailey - 17 Aug, 2016 - Comments: 0

Optimization used to be a simple timing against area tradeoff but not anymore. As we go to each new node, the tradeoffs become more complicated involving additional aspects of the design that used to be dealt with in isolation. Semiconductor Engineering sat down to discuss these issues with Krishna Balachandran, director of product management for low power products at [getentity id="22032" ... » read more

10nm Race Heats Up
By Mark LaPedus - 16 Aug, 2016 - Comments: 0

The 10nm process and foundry race is heating up, as Intel announced its 10nm technology at its annual conference. As part of the multi-pronged announcement, Intel’s foundry unit forged a major partnership with ARM. Specifically, ARM will make its physical intellectual-property (IP) available on Intel’s 10nm process. Intel, in turn, will offer the IP for foundry customers. And on to... » read more

New Architectures, Approaches To Speed Up Chips
By Ed Sperling - 15 Aug, 2016 - Comments: 2

The need for speed is back. An explosion in the amount of data that needs to be collected and processed is driving a new wave of change in hardware, software and overall system design. After years of emphasizing power reduction, performance has re-emerged as a top concern in a variety of applications such as smarter cars, wearable devices and cloud data centers. But how to get there has cha... » read more

Optimization Challenges For 10nm And 7nm
By Brian Bailey - 11 Aug, 2016 - Comments: 0

Optimization used to be a simple timing against area tradeoff, but not anymore. As we go to each new node the tradeoffs become more complicated, involving additional aspects of the design that used to be dealt with in isolation. Semiconductor Engineering sat down to discuss these issues with Krishna Balachandran, director of product management for low-power products at [getentity id="22032"... » read more

Stacked Die Changes
By Ed Sperling - 27 Jul, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with David Pan, associate professor in the department of electrical and computer engineering at the University of Texas; Max Min, senior technical manager at Samsung; John Hunt, senior director of engineering at ASE; and Sitaram Arkalgud, vice president of 3D portfolio and technologies at Invensas. What follows are excerpts of tha... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy