tag: 7nm

More Problems Ahead
By Ed Sperling - 14 Aug, 2014 - Comments: 3

Semiconductor Engineering sat down to discuss future scaling problems with Lars Liebmann, a fellow at IBM; Adam Brand, managing director of transistor technology at Applied Materials; Karim Arabi, vice president of engineering at Qualcomm; and Srinivas Banna, a fellow for advanced technology architecture at GlobalFoundries. SE: We’re starting to hear talk about octuple patterning. We’ve ... » read more

IP Integration Challenges Rising
By Ann Mutschler - 24 Jul, 2014 - Comments: 0

It’s not just [getkc id="80" comment="lithography"] that is putting a crimp in sub-28nm designs. As more functions, features, transistors and software are added onto chips, the pressure to get chips out the door has forced chipmakers to lean more heavily on third-party IP providers. Results, as you might expect, have been mixed. The number of blocks has mushroomed, creating its own web of ... » read more

EDA’s Hedge Plays
By Ed Sperling - 24 Jul, 2014 - Comments: 0

While 14/16nm process technologies with finFETs and double patterning have pushed complexity to new heights, the move to 10nm fundamentally will change a number of very basic elements of the design through manufacturing flow—and EDA vendors will be caught in the middle of having to make hard choices between foundries, processes, packaging approaches, and potentially which markets to serve. ... » read more

Executive Insight: Satish Bagalkotkar
By Ed Sperling - 23 Jul, 2014 - Comments: 1

Semiconductor Engineering sat down with Satish Bagalkotkar, president and CEO of design services company Synapse Design to talk about massive shifts in the semiconductor industry and his vision of how these changes will alter the landscape, from chipmakers to design services to what gets built and how it will get used. What follows are excerpts of that interview. SE: What worries you most? ... » read more

DFM And Multipatterning
By Ed Sperling - 17 Jul, 2014 - Comments: 0

Semiconductor Engineering sat down to discuss DFM at advanced nodes with Kuang-Kuo Lin, director of foundry design enablement at Samsung Electronics; Jongwook Kye, lithography modeling and architecture fellow at GlobalFoundries; David Abercrombie, advanced physical verification methodology program manager at Mentor Graphics; Ya-Chieh Lai, engineering director for DFM/CLS silicon signoff and ver... » read more

Will 7nm And 5nm Really Happen?
By Mark LaPedus - 14 Jul, 2014 - Comments: 2

Today’s silicon-based finFETs could run out of steam at 10nm. If or when chipmakers move beyond 10nm, IC vendors will require a new transistor architecture. III-V finFETs, gate-all-around FETs, quantum well finFETs, SOI finFETs and vertical nanowires are just a few of the future transistor candidates at 7nm and 5nm. Technically, it’s possible to manufacture the transistor portions of the... » read more

Confusion Does Not Equal Paralysis
By Ed Sperling - 10 Jul, 2014 - Comments: 0

After attending the two biggest semiconductor conferences in the world, along with a long list of notable conferences targeted to a wide variety of technologies and engineering disciplines, it’s clear the industry is racing ahead. But “ahead” is now a relative term. While Moore’s Law satisfied both economic and technological requirements, it was easy to figure out what “ahead” me... » read more

Stacked Die Are Coming Soon. Really
By Ed Sperling - 10 Jul, 2014 - Comments: 3

Since the beginning of the decade there have been many predictions that stacked die were just over the hill, but the time it has taken to climb that hill has been longer than most people would have anticipated. In fact, TSMC has been fully capable of building stacked die since last year, with risk production expected to be completed by year, according to Gartner. But something very fundament... » read more

All Together Now!
By Karen Savala - 30 Jun, 2014 - Comments: 0

Consolidation is changing the face of our industry. It is tempting to think that a narrower more consolidated industry is easier to navigate and might require less facilitated coordination and collaboration. However, it turns out the reverse is true. With fewer, but much bigger companies, the bets become exponentially bigger.  At the same time technical challenges — such as advanced tra... » read more

Semiconductor R&D Crisis Ahead?
By Ed Sperling - 26 Jun, 2014 - Comments: 0

Listen to engineering management at chipmakers these days and a consistent theme emerges: They’re all petrified about where to place their next technology bets. Do they move to 14/16nm finFETs with plans to shrink to 10nm, 7nm and maybe even 5nm? Do they invest in 2.5D and 3D stacked die? Or do they eke more from existing process nodes using new process technologies, more compact designs and ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy