tag: semiconductor

What’s Next In Advanced Packaging
By Mark LaPedus - 20 Jun, 2019 - Comments: 3

Packaging houses are readying the next wave of advanced IC packages, hoping to gain a bigger foothold in the race to develop next-generation chip designs. At a recent event, ASE, Leti/STMicroelectronics, TSMC and others described some of their new and advanced IC packaging technologies, which involve various product categories, such as 2.5D, 3D and fan-out. Some new packaging technologies ar... » read more

Manufacturing Bits: June 18
By Mark LaPedus - 18 Jun, 2019 - Comments: 0

Making microvias in packages At the recent IEEE Electronic Components and Technology Conference (ECTC) in Las Vegas, Georgia Institute of Technology, Tokyo Ohka Kogyo (TOK) and Panasonic presented a paper on a technology that enables ultra-small microvias for advanced IC packages. Researchers demonstrated a picosecond UV laser technology as well as materials, which enabled 2μm to 7μm vias... » read more

Circuit Aging Becoming A Critical Consideration
By Ann Mutschler - 17 Jun, 2019 - Comments: 5

Circuit aging was considered somebody else's problem when most designs were for chips in consumer applications, but not anymore. Much of this reflects a shift in markets. When most chips were designed for consumer electronics, such as smart phones, designs typically were replaced every couple of years. But with the mobile phone market flattening, and as chips increasingly are used in automot... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 14 Jun, 2019 - Comments: 0

Market research In the second quarter of 2019, TrendForce said that the top-5 foundry rankings remained identical with that of last year. But sixth to tenth place showed some changes. Who is up or down in what is a tough business climate? Global fab equipment spending will rebound in 2020, growing 20% to $58.4 billion after dropping 19% to $48.4 billion in 2019, according to SEMI. However, ... » read more

Playing Into China’s Hands
By Ed Sperling - 13 Jun, 2019 - Comments: 1

The fallout over blacklisting Huawei in particular, and China in general, has set the tone for a nasty global race. But it is almost certain to produce a different result than the proponents of a trade war are expecting. The idea behind tariffs and the blacklisting of Huawei is to starve China of vital technology. So far, the impact has been minimal. Reports from inside of China are equa... » read more

Why Chips Are Getting Noisier
By Brian Bailey - 13 Jun, 2019 - Comments: 4

In the past, designers only had to worry about noise for sensitive analog portions of a design. Digital circuitry was immune. But while noise gets worse at newer process nodes, staying at 28nm does not mean that it can be ignored anymore. With Moore's Law slowing, designs have to do more with less. Margins are being squeezed, additional concurrency is added, and attempts are made to opti... » read more

Inspection, Metrology Challenges Grow For SiC
By Mark LaPedus - 11 Jun, 2019 - Comments: 2

Inspection and metrology are becoming more critical in the silicon carbide (SiC) industry amid a pressing need to find problematic defects in current and future SiC devices. Finding defects always has been a challenging task for SiC devices. But it’s becoming more imperative to find killer defects and reduce them as SiC device vendors begin to expand their production for the next wave of a... » read more

Clean Focus, Dose And CD Metrology For CD Uniformity Improvement
By KLA - 11 Jun, 2019 - Comments: 0

Authors: Honggoo Leea, Sangjun Hana, Minhyung Honga, Seungyong Kima, Jieun Leea, DongYoung Leea, Eungryong Oha, Ahlin Choia, Nakyoon Kimb, John C. Robinsonc, Markus Mengelc, Pablo Rovirac, Sungchul Yooc, Raphael Getinc, Dongsub Choib, Sanghuck Jeonb aSK Hynix, 2091, Gyeongchung-daero, Bubal-eub, Icheon-si, Gyeonggi-do, 467-701, Korea bKLA-Tencor Korea, Starplaza bldg., 53 Metapolis-ro, Hwasung... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 07 Jun, 2019 - Comments: 0

Market research IC Insights has released its forecast for chips in terms of applications. Communications is still the biggest IC market, but automotive is growing the fastest. In its first forecast of artificial intelligence (AI) edge processors, International Data Corp. (IDC) estimates that worldwide shipments of AI-optimized processors for edge systems will reach 340.1 million units in 20... » read more

ATE Lab To Fab
By Ed Sperling - 05 Jun, 2019 - Comments: 2

Shu Li, business development manager at Advantest, zeroes in on the communication gap between engineers on the design side and the manufacturing/test side, why it exists, and what needs to be done to bridge that gap in order to speed up and improve test quality. https://youtu.be/Nd-5_twbJBw     See other tech talk videos here » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy