tag: ATE

Digging Much Deeper With Unit Retest
By Anne Meixner - 08 Jun, 2021 - Comments: 0

Keeping test costs flat in the face of product complexity continues to challenge both product and test engineers. Increased data collection at package-level test and the ability to respond to it in a never-before level of detail has prompted device makers and assembly and test houses to tighten up their retest processes. Test metrology, socket contamination, and mechanical alignment have alw... » read more

Managing Wafer Retest
By Anne Meixner - 19 May, 2021 - Comments: 1

Every wafer test touch-down requires a balance between a good electrical contact and preventing damage to the wafer and probe card. Done wrong, it can ruin a wafer and the customized probe card and result in poor yield, as well as failures in the field. Achieving this balance requires good wafer probing process procedures as well as monitoring of the resulting process parameters, much of it ... » read more

Testing AiP Modules In High-Volume Production
By Jose Moreira - 11 May, 2021 - Comments: 0

Far-field and radiating near-field are two options for high-volume over-the-air (OTA) testing of antenna-in-package (AiP) modules with automated test equipment (ATE) [1]. In this article, we define an AiP device under test (DUT) and examine the measurement results from both methods. Creating an AiP evaluation vehicle Proper evaluation of an ATE OTA measurement setup requires an AiP module. Us... » read more

Testing Analog Circuits Becoming More Difficult
By Susan Rambo - 11 May, 2021 - Comments: 1

Foundries and packaging houses are wrestling how to control heat in the testing phase, particularly as devices continue to shrink and as thermally sensitive analog circuits are added into SoCs and advanced packages to support everything from RF to AI. The overriding problem is that heat can damage chips or devices under test. That's certainly true for digital chips developed at advanced node... » read more

Chasing Test Escapes In IC Manufacturing
By Anne Meixner - 11 May, 2021 - Comments: 0

The number of bad chips that slip through testing and end up in the field can be significantly reduced before those devices ever leave the fab, but the cost of developing the necessary tests and analyzing the data has sharply limited adoption. Determining an acceptable test escape metric for an IC is essential to improving the yield-to-quality ratio in chip manufacturing, but what exactly is... » read more

ATE In The Age Of Convergence And Exascale Computing
By Matthias Stahl - 06 Apr, 2021 - Comments: 0

We are currently in the midst of the age of convergence – that is, the convergence of data from a range of applications and data sources. These sources constitute anything that creates data – ranging from human-created data, such as voice and video, through automotive, mobile, and wireless/IoT devices. This also includes edge computing and servers storing the massive amounts of data needed ... » read more

Metrology at Automated Test Equipment Manufacturers
By Advantest - 08 Feb, 2021 - Comments: 0

New technologies require an efficient qualification infrastructure to determine and qualify technical specifications. Metrology is the science which determines the acknowledged specification setting process based on proven international standards. This paper describes metrology and its role and benefits in automated test equipment business. By Piotr Skwierawski and Ralf Haefner. Click her... » read more

Monitoring IC Abnormalities Before Failures
By Anne Meixner - 07 Jul, 2020 - Comments: 0

The rising complexities of semiconductor processes and design are driving an increasing use of on-chip monitors to support data analytics from an IC’s birth through its end of life — no matter how long that projected lifespan. Engineers have long used on-chip circuitry to assist with manufacturing test, silicon debug and failure analysis. Providing visibility and controllability of inter... » read more

The Good And Bad Of Chiplets
By Mark LaPedus - 27 May, 2020 - Comments: 1

The chiplet model continues to gain traction in the market, but there are still some challenges to enable broader support for the technology. AMD, Intel, TSMC, Marvell and a few others have developed or demonstrated devices using chiplets, which is an alternative way to develop an advanced design. Beyond that, however, the adoption of chiplets is limited in the industry due to ecosystem issu... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 07 Feb, 2020 - Comments: 0

Fab tools Citing the outbreak of the coronavirus in China, SEMI has postponed Semicon/FPD China 2020 and related events originally scheduled for March 18-20, 2020. For the same reason, SEMI will no longer host Semicon Korea 2020 in Seoul, South Korea, February 5-7, as originally scheduled. ------------------------------- Veeco has introduced the new Lumina Metal Organic Chemical Vapor De... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy