Mask Making Issues With EUV

By Mark LaPedus - 17 Oct, 2019 - Comments: 0

Semiconductor Engineering sat down to discuss lithography and photomask trends with Bryan Kasprowicz, director of technology and strategy and a distinguished member of the technical staff at Photronics; Thomas Scheruebl, director of strategic business development and product strategy at Zeiss; Noriaki Nakayamada, senior technologist at NuFlare; and Aki Fujimura, chief executive of D2S. What fol... » read more

Curvilinear Full-Chip ILT

By Ed Sperling - 17 Oct, 2019 - Comments: 0

Leo Pang, chief product officer and executive vice president at D2S, talks about the speed improvements with full-chip inverse lithography technology, why it is so critical in stitching together large chips, and how this approach differs from traditional litho approaches. » read more

Manufacturing Bits: Sept. 17

By Mark LaPedus - 17 Sep, 2019 - Comments: 0

Full-chip inverse lithography D2S has developed new hardware and software that enables a long-awaited technology--full-chip masks using inverse lithography technology (ILT). For years, ILT has been a promising technology. ILT is a next-generation reticle enhancement technique (RET) that enables an optimal photomask pattern for both optical and extreme ultraviolet (EUV) lithography reticles.... » read more

Mixed Picture Seen For EUV Masks

By Mark LaPedus - 16 Sep, 2019 - Comments: 0

The confidence level of extreme ultraviolet (EUV) lithography continues to grow as the technology moves into production, but the EUV mask infrastructure remains a mixed picture, according to new surveys released by the eBeam Initiative. The EUV mask infrastructure involves several technologies that are in various stages of development. On one front, the outlook for several mask tool technol... » read more

EUV Mask Gaps And Issues

By Mark LaPedus - 08 May, 2019 - Comments: 1

Semiconductor Engineering sat down to discuss extreme ultraviolet (EUV) lithography and photomask technologies with Emily Gallagher, principal member of the technical staff at Imec; Harry Levinson, principal at HJL Lithography; Chris Spence, vice president of advanced technology development at ASML; Banqiu Wu, senior director of process development at Applied Materials; and Aki Fujimura, chief ... » read more

EUV Mask Readiness Challenges

By Mark LaPedus - 21 Mar, 2019 - Comments: 0

Multi-Beam Mask Writing Finally Comes Of Age

By Mark LaPedus - 15 Nov, 2018 - Comments: 0

Elmar Platzgummer, chief executive of IMS Nanofabrication, sat down with Semiconductor Engineering to discuss photomask and mask writing trends. IMS, a subsidiary of Intel, is a supplier of multi-beam e-beam systems for photomask production. What follows are excerpts of that conversation. SE: For years, photomask makers have used single-beam e-beam tools to pattern or write the features on ... » read more

Fabs Meet Machine Learning

By Mark LaPedus - 19 Jul, 2018 - Comments: 2

Aki Fujimura, chief executive of D2S, sat down with Semiconductor Engineering to discuss Moore’s Law and photomask technology. Fujimura also explained how artificial intelligence and machine learning are impacting the IC industry. What follows are excerpts of that conversation. SE: For some time, you’ve said we need more compute power. So we need faster chips at advanced nodes, but cost... » read more

Will Fab Tool Boom Cycle Last?

By Mark LaPedus - 18 Dec, 2017 - Comments: 2

Fab equipment spending is on pace for a record year in 2017, and it now appears that momentum could continue into 2018. Fab tool vendors found themselves in the midst of an unexpected boom cycle in 2017, thanks to enormous demand for equipment in [getkc id="208" comment="3D NAND"] and, to a lesser degree, [getkc id="93" kc_name="DRAM"]. In the logic/foundry business, however, equipment deman... » read more

Inside Photomask Writing

By Mark LaPedus - 19 Jan, 2017 - Comments: 0

Hirokazu Yamada, a board member and the director of the Mask Lithography Division of NuFlare, sat down with Semiconductor Engineering to discuss photomask technology, e-beam mask writer trends and other topics. NuFlare is the world’s largest supplier of e-beam mask writers. What follows are excerpts of that conversation. SE: How does the [getkc id="265" kc_name="photomask"] market look in... » read more

← Older posts Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?

by Brian Bailey

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

Why Small Fab And Assembly Houses Are Thriving

Megafabs churning out the most advanced processors are not the only game in town.

by Bryon Moyer

New AI Processors Architectures Balance Speed With Efficiency

Hot Chips 24: Large language models ratchet up pressure for sustainable computing and heterogeneous integration; data management becomes key differentiator.