tag: MCM

SiPs And MCMs Broaden Opportunities For Military-Aerospace System Design
By Rosie Medina - 23 May, 2022 - Comments: 0

Military and aerospace (mil-aero) applications, from satellites and rockets to ships and planes, increasingly require electronic systems and subsystems with high functionality and performance in a small form factor. Meeting these demands poses higher-level challenges for packaging of these microelectronic devices, which needs to be rugged, long-lived, and affordable. Usage of multi-chip modu... » read more

Technology Advances, Shortages Seen For Wire Bonders
By Mark LaPedus - 17 Feb, 2022 - Comments: 2

A surge in demand for IC packages is causing long lead times for wire bonders, which are used to assemble three-fourths of the world’s packages. The wire bonder market doubled last year, alongside advanced packaging’s rise. Wirebonding is an older technology that typically flies under the radar. Still, packaging houses have multitudes of these key tools that help assemble many — but no... » read more

Future Challenges For Advanced Packaging
By Mark LaPedus - 20 Jan, 2022 - Comments: 1

Michael Kelly, vice president of advanced packaging development and integration at Amkor, sat down with Semiconductor Engineering to talk about advanced packaging and the challenges with the technology. What follows are excerpts of that discussion. SE: We’re in the midst of a huge semiconductor demand cycle. What’s driving that? Kelly: If you take a step back, our industry has always ... » read more

Holistic Die-to-Die Interface Design Methodology for 2.5-D Multichip-Module Systems
By Technical Paper Link - 23 Dec, 2021 - Comments: 0

Abstract: "More than Moore technologies can be supported by system-level diversification enabled by chiplet-based integrated systems within multichip modules (MCMs) and silicon interposer-based 2.5-D systems. The division of large system-on-chip dies into smaller chiplets with different technology nodes specific to the chiplet application requirement enables the performance enhancement at the ... » read more

What Does It Take To Build A Successful Multi-Chip Module Factory?
By Mike McIntyre - 06 Jul, 2021 - Comments: 0

When it comes to multi-chip module (MCM) manufacturing, fan-out wafer-level and fan-out panel-level packaging have received a lot of coverage recently. Every week, it seems like there is an announcement about “Company XYZ” moving their products into the fan-out wafer-level packaging (FOWLP) or fan-out panel-level packaging (FOPLP) space. But these moves come with challenges that didn’t ex... » read more

Fan-Out Packaging Options Grow
By Mark LaPedus - 17 Jun, 2021 - Comments: 0

Chipmakers, OSATs and R&D organizations are developing the next wave of fan-out packages for a range of applications, but sorting out the new options and finding the right solution is proving to be a challenge. Fan-out is a way to assemble one or more dies in an advanced package, enabling chips with better performance and more I/Os for applications like computing, IoT, networking and sma... » read more

NN-Baton: DNN Workload Orchestration & Chiplet Granularity Exploration for Multichip Accelerators
By Technical Paper Link - 14 Jun, 2021 - Comments: 0

"Abstract—The revolution of machine learning poses an unprecedented demand for computation resources, urging more transistors on a single monolithic chip, which is not sustainable in the Post-Moore era. The multichip integration with small functional dies, called chiplets, can reduce the manufacturing cost, improve the fabrication yield, and achieve die-level reuse for different system scales... » read more

Debug And Traceability Of MCMs And Chiplets In The Manufacturing Test Process
By Guy Cortez - 16 Apr, 2021 - Comments: 0

Single die packages and products have been the norm for decades. Moreover, so has multi-chip modules (MCMs) or system in package (SiP) for quite some time. Understandably, with ASICs and SoCs becoming larger while silicon geometries continue to get smaller, there is an opportunity to combine even more functionality into a smaller form factor for the end product. Hence, new advancements in desig... » read more

Designing 2.5D Systems
By Brian Bailey - 15 Mar, 2021 - Comments: 0

As more designs hit the reticle limit, or suffer from decreasing yield, migrating to 2.5D designs may provide a path forward. But this kind of advanced packaging also comes with some additional challenges. How you adapt and change your design team may be determined by where your focus has been in the past, or what you are trying to achieve. There are business, organizational, and technical c... » read more

Chiplets For The Masses
By Brian Bailey - 03 Mar, 2021 - Comments: 2

Chiplets are a compelling technology, but so far they are available only to a select few players in the industry. That's changing, and the industry has taken little steps to get there, but timing for when you will be able to buy a chiplet to integrate into your system remains uncertain. While new fabrication nodes continue to be developed, scaling is coming to an end, be it for physical or e... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy