7nm Fab Challenges

By Mark LaPedus - 21 Apr, 2016 - Comments: 3

Leading-edge foundry vendors have made the challenging transition from traditional planar processes into the finFET transistor era. The first [getkc id="185" kc_name="finFETs"] were based on the 22nm node, and now the industry is ramping up 16nm/14nm technologies. Going forward, the question is how far the finFET can be scaled. In fact, 10nm finFETs from Samsung are expected to ramp by ye... » read more

Internet of FD-SOI Things?

By Katherine Derbyshire - 18 Feb, 2016 - Comments: 0

Are fully-depleted silicon-on-insulator (FD-SOI) wafers having a moment? Certainly SOI wafers are not new. Soitec’s SmartCut layer transfer technology was patented in 1994, and wafers with implanted oxide layers were available before that. Still, adoption of SOI wafers has been limited. Though they offer improved device isolation and reduced parasitics, the increased wafer cost has been an ob... » read more

The Bumpy Road To 10nm FinFETs

By Mark LaPedus - 21 May, 2015 - Comments: 0

Foundry vendors are currently ramping up their 16nm/14nm [getkc id="185" kc_name="finFET"] processes in the market. Vendors are battling each other for business in the arena, although the migration from planar to finFETs is expected to be a slow and expensive process. Still, despite the challenges at 16nm/14nm, vendors are gearing up for the next battle in the foundry business—the 10nm nod... » read more

The End Of Silicon?

By Katherine Derbyshire - 04 May, 2015 - Comments: 1

As transistors shrink, not all device parameters scale at the same rate—and therein lies a potentially huge problem. In recent years, manufacturers have been able to reduce equivalent oxide thickness (EOT) more quickly than operating voltage. As a result, the electric field present in the channel and gate dielectric has been increasing. Moreover, EOT reduction is achieved in part by reduci... » read more

Still Waiting For III-V Chips

By Mark LaPedus - 19 Feb, 2015 - Comments: 0

For years, chipmakers have been searching for an alternative material to replace traditional silicon in the channel for advanced CMOS devices at 7nm and beyond. There’s a good reason, too: At 7nm, silicon will likely run out of steam in the channel. Until recently, chipmakers were counting on III-V materials for the channels, at least for NFET. Compared to silicon, III-V materials provide ... » read more

Next Channel Materials?

By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Chipmakers are making a giant leap from planar transistors to [getkc id="185" kc_name="finFETs"]. Initially, [getentity id="22846" e_name="Intel"] moved into finFET production at 22nm and is now ramping up its second-generation finFETs at 14nm. And the other foundries will enter the finFET fray at 16nm/14nm. So what’s next? Chipmakers will likely extend the finFET architecture to both 10nm... » read more

One-On-One: Aaron Thean

By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Aaron Thean, vice president of process technologies and director of the logic devices R&D program at Imec. SE: Chipmakers are ramping up the 16nm/14nm logic node, with 10nm and 7nm in R&D. What’s the current timeline for 10nm and 7nm? Thean: 10nm is on its way. We will see r... » read more

Transistor Options Narrow For 7nm

By Mark LaPedus - 13 Nov, 2014 - Comments: 0

Chipmakers are currently ramping up silicon-based finFETs at the 16nm/14nm node, with plans to scale the same technology to 10nm. Now, the industry is focusing on the transistor options for 7nm and beyond. At one time, the leading contenders involved several next-generation transistor types. At present, the industry is narrowing down the options and one technology is taking a surprising lea... » read more

Experts At The Table: Process Technology Challenges

By Mark LaPedus - 05 Sep, 2013 - Comments: 0

By Mark LaPedus Semiconductor Manufacturing & Design sat down to discuss future transistor, process and manufacturing challenges with Subramani Kengeri, vice president of advanced technology architecture at GlobalFoundries; Carlos Mazure, chief technical officer at Soitec; Raj Jammy, senior vice president and general manager of the Semiconductor Group at Intermolecular; and Girish Dixit, v... » read more

Getting Ready For High-Mobility FinFETs

By Mark LaPedus - 21 Feb, 2013 - Comments: 0

By Mark LaPedus The IC industry entered the finFET era in 2011, when Intel leapfrogged the competition and rolled out the newfangled transistor technology at the 22nm node. Intel hopes to ramp up its second-generation finFET devices at 14nm by year’s end, with plans to debut its 11nm technology by 2015. Hoping to close the gap with Intel, silicon foundries are accelerating their efforts t... » read more

Newer posts →

Knowledge Centers
Entities, people and technologies explored

Shift Left Is The Tip Of The Iceberg

A transformative change is underway for semiconductor design and EDA. New languages, models, and abstractions will need to be created.

by Brian Bailey

Partitioning In The Chiplet Era

Understanding how chiplets interact under different workloads is critical to ensuring signal integrity and optimal performance in heterogeneous designs.

by Ann Mutschler

3.5D: The Great Compromise

Pros and cons of a middle-ground chiplet assembly that combines 2.5D and 3D-IC.

by Ed Sperling

AI’s Role In Chip Design Widens, Drawing In New Startups

Focus is on letting engineers do much more with the same or fewer resources — and less drudgery.

by Karen Heyman

Key Technologies To Extend EUV To 14 Angstroms

Alongside high-NA EUV will be better-performing photoresists, reduced roughness using passivation and etch, and lateral etching to reduce tip-to-tip dimensions.

by Laura Peters

Memory Fundamentals For Engineers

eBook: Nearly everything you need to know about memory, including detailed explanations of the different types of memory; how and where these are used today; what's changing, which memories are successful and which ones might be in the future; and the limitations of each memory type.

by The SE Staff

What Comes After HBM For Chiplets

The standard for high-bandwidth memory limits design freedom at many levels, but that is required for interoperability. What freedoms can be taken from other functions to make chiplets possible?