tag: Samsung

Getting The Jump On Analog/RF IP
By Ed Sperling - 26 Jul, 2016 - Comments: 0

When Magma Design was sold to Synopsys in 2012, then-president and COO Roy Jewell sat down with VC Lucio Lanza to figure out what to do next. As Jewell tells it, Lanza convinced him not to take another job. While it’s too early to tell if that was sage advice, it did trigger a search for a new business and a way of funding it. Jewell said that when Magma went looking for money, it raised $... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 22 Jul, 2016 - Comments: 2

Market research Worldwide semiconductor capital spending is projected to decline 0.7% in 2016, to $64.3 billion, according to Gartner. This is up from the estimated 2% decline in Gartner's previous quarterly forecast. "Economic instability, inventory excess, weak demand for PC’s, tablets, and mobile products in the past three years has caused slow growth for the semiconductor industry. This ... » read more

5 Takeaways From Semicon
By Mark LaPedus - 21 Jul, 2016 - Comments: 0

As usual, the recent Semicon West trade show was a busy, if not an overwhelming, event. The event, which took place in San Francisco in early July, featured presentations on the usual subjects in the semiconductor and IC-equipment sectors. There were sessions on 200mm, next-generation processes, transistors, lithography, MEMS and many others. In no particular order, here are my five ta... » read more

Building Faster Chips
By Ed Sperling - 21 Jul, 2016 - Comments: 5

By Ed Sperling and Jeff Dorsch An explosion in IoT sensor data, the onset of deep learning and AI, and the commercial rollout of augmented and virtual reality are driving a renewed interest in performance as the key metric for semiconductor design. Throughout the past decade in which mobility/smartphone dominated chip design, power replaced performance as the top driver. Processors ha... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 15 Jul, 2016 - Comments: 0

Fab and test equipment The wafer inspection market is heating up. For example, Applied Materials announced its new e-beam inspection system for use in foundry, logic, DRAM and 3D NAND applications. In addition, KLA-Tencor introduced six wafer defect inspection and review systems for leading-edge IC device manufacturing. National Instruments has rolled out a second-generation vector sig... » read more

No More Easy IP Money
By Brian Bailey - 14 Jul, 2016 - Comments: 2

The semiconductor intellectual property ([getkc id="43" kc_name="IP"]) industry is two decades old, but questions are still being asked about what's wrong with it and what needs to be fixed. Normally these kinds of issues are reserved for fast-moving, young industries, not one that is the backbone of semiconductors. Design reuse has become an indispensable part of the design of nearly all el... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 08 Jul, 2016 - Comments: 2

Fab materials/tools The Reference Project, a pan-European research program created to develop radio-frequency silicon-on-insulator (RF-SOI) technology, was recently launched at the Bernin, France-based facilities of Soitec. Soitec is the project leader in the group, which has an eligible budget of 33 million euros. The project will focus on developing technologies for 4G+ communications usi... » read more

Rethinking The Sensor
By Ed Sperling - 07 Jul, 2016 - Comments: 0

Sensor technology is beginning to change on a fundamental level as companies begin looking beyond a human’s five senses, on which early sensors were modeled, to what can be done with those sensors for specific applications. In some cases, [getkc id="187" kc_name="sensors"] don’t have to be as accurate as the sight, smell, touch, taste and hearing of a person. In others, they can be a... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 01 Jul, 2016 - Comments: 0

Fab tools Applied Materials has officially rolled out the Producer Selectra system, a selective etch tool. The system falls under the loosely defined category called atomic layer etch (ALE). Applied’s technology addresses a number of challenges. Today’s advanced chips have complex structures. They may also have deep and narrow trenches. One of the challenges is the inability of wet ... » read more

Atomic Layer Etch Heats Up
By Mark LaPedus - 29 Jun, 2016 - Comments: 0

The atomic layer etch (ALE) market is starting to heat up as chipmakers push to 10nm and beyond. ALE is a promising next-generation etch technology that has been in R&D for the last several years, but until now there has been little or no need to use it. Unlike conventional etch tools, which remove materials on a continuous basis, ALE promises to selectively and precisely remove targete... » read more

← Older posts Newer posts →

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy