tag: Samsung

Stepping Back From Scaling
By Ed Sperling - 24 Aug, 2016 - Comments: 0

Architectures, packaging and software are becoming core areas for semiconductor research and development, setting the stage for a series of shifts that will impact a large swath of the semiconductor industry. While there is still demand from the largest chipmakers for increased density at the next process node, the underlying economics for foundries, equipment vendors and IP developers are f... » read more

Mask Maker Worries Grow
By Mark LaPedus - 18 Aug, 2016 - Comments: 2

Leading-edge photomask makers face a multitude of challenges as they migrate from the 14nm node and beyond. Mask making is becoming more challenging and expensive at each node on at least two fronts. On one front, mask makers must continue to invest in the development of traditional optical masks at advanced nodes. On another front, several photomask vendors are preparing for the possible ra... » read more

What Transistors Will Look Like At 5nm
By Mark LaPedus - 18 Aug, 2016 - Comments: 3

Chipmakers are currently ramping up 16nm/14nm finFET processes, with 10nm and 7nm just around the corner. The industry also is working on 5nm. TSMC hopes to deliver a 5nm process by 2020. GlobalFoundries, Intel and Samsung are doing R&D for that node. But 5nm technology presents a multitude of unknowns and challenges. For one thing, the exact timing and specs of 5nm remain cloudy. The... » read more

10nm Race Heats Up
By Mark LaPedus - 16 Aug, 2016 - Comments: 0

The 10nm process and foundry race is heating up, as Intel announced its 10nm technology at its annual conference. As part of the multi-pronged announcement, Intel’s foundry unit forged a major partnership with ARM. Specifically, ARM will make its physical intellectual-property (IP) available on Intel’s 10nm process. Intel, in turn, will offer the IP for foundry customers. And on to... » read more

The Week In Review: IoT
By Jeff Dorsch - 12 Aug, 2016 - Comments: 0

Deals Rambus completed its $32 million acquisition of the Snowbush IP assets from Semtech. Through the end of 2022, Rambus may make additional payments on the transaction, depending upon new product sales. The Snowbush IP assets became part of the Memory and Interfaces Division at Rambus, complementing the company’s offerings in IP and serializer/deserializer blocks. Samsung Electronics A... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 12 Aug, 2016 - Comments: 0

Chipmakers At this week’s Flash Memory Summit, Samsung rolled out several new products, including its next-generation 3D NAND device and a solid-state drive (SSD) with capacities up to 32 terabytes. At the same time, Samsung introduced a new and high-performance SSD solution, dubbed the Z-SSD. Samsung’s Z-SSD shares the fundamental structure of V-NAND and has a unique circuit design and... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 05 Aug, 2016 - Comments: 0

Chipmakers The wearables market has taken another hit. Intel has issued a safety recall for a smartwatch line from its Basis Science subsidiary. "We are issuing this safety recall of the Basis Peak watch because the watch can overheat, which could result in burns or blisters on the skin surface. It is important that you stop using your watch immediately and return it. Although we are stopping ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 29 Jul, 2016 - Comments: 0

Fab tools Lam Research’s proposed move to acquire KLA-Tencor has been pushed out for the second time. The deal was supposed to be completed by mid-2016. Then, it was pushed out to the third quarter amid regulatory issues. Now, the companies hope to close the deal by the fourth quarter of 2016. “The KLA-Tencor acquisition is expected to close in the December quarter. This reflects another p... » read more

Stacked Die Changes
By Ed Sperling - 27 Jul, 2016 - Comments: 0

Semiconductor Engineering sat down to discuss advanced packaging with David Pan, associate professor in the department of electrical and computer engineering at the University of Texas; Max Min, senior technical manager at Samsung; John Hunt, senior director of engineering at ASE; and Sitaram Arkalgud, vice president of 3D portfolio and technologies at Invensas. What follows are excerpts of tha... » read more

Getting The Jump On Analog/RF IP
By Ed Sperling - 26 Jul, 2016 - Comments: 0

When Magma Design was sold to Synopsys in 2012, then-president and COO Roy Jewell sat down with VC Lucio Lanza to figure out what to do next. As Jewell tells it, Lanza convinced him not to take another job. While it’s too early to tell if that was sage advice, it did trigger a search for a new business and a way of funding it. Jewell said that when Magma went looking for money, it raised $... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy