tag: simulation

Simplifying Power Module Verification Using Compliance Checking
By Wilfried Wessel - 05 Oct, 2023 - Comments: 0

By Wilfried Wessel, Siemens EDA; Simon Liebetegger, University of Applied Sciences, Darmstadt; and Florian Bauer, Siemens EDA Current simulation and verification methods for power modules are time-consuming. Each domain has specific solutions based on finite elements analysis, computational fluid dynamics and solvers for electric circuits like SPICE. This article investigates if it is possib... » read more

Everyone’s A System Designer With Heterogeneous Integration
By Ann Mutschler - 02 Oct, 2023 - Comments: 0

The move away from monolithic SoCs to heterogeneous chips and chiplets in a package is accelerating, setting in motion a broad shift in methodologies, collaborations, and design goals that are felt by engineers at every step of the flow, from design through manufacturing. Nearly every engineer is now working or touching some technology, process, or methodology that is new. And they are inter... » read more

The Federation Needs A Taxonomy
By Brian Bailey - 28 Sep, 2023 - Comments: 0

While putting together the story about federated simulation, it brought back memories of an earlier part of my career when I spent a lot of time looking at modeling abstractions and simulation frameworks. In the mid-1990s, the notions of re-using pre-designed blocks of IP started to become popular, but the fledgling industry was in disarray. Every IP block had a different set of deliverables... » read more

Industry Pressure Grows For Simulating Systems Of Systems
By Brian Bailey - 28 Sep, 2023 - Comments: 0

Most complex systems are designed in a top-down manner, but as the amount of electronic content in those systems increases, so does the pressure on the chip industry to provide high-level models and simulation capabilities. Those models either do not exist today, or they exist in isolation. No matter how capable a model or simulator, there never will be one that can do it all. In some cases,... » read more

Use Tcl To Save Signals More Efficiently In AMS Simulations
By Qingyu Lin - 28 Sep, 2023 - Comments: 0

Saving signal waveforms during a simulation is one of the basic ways to check the simulation results. However, with large SoC designs, it’s not always practical to save all signals during simulation, and the simulation performance might also be impacted by the number of signals being saved. Therefore, a crucial part of the simulation setup is to specify the expected and essential signals to s... » read more

Jumping Over Thermal Cycles Accelerates Thermomechanical Fatigue Simulations
By Tim Palucka - 14 Sep, 2023 - Comments: 0

Although you are probably not aware of them, dozens of electronic control units (ECUs) — printed circuit boards (PCBs) in metal or plastic housings — exist in your car to control and monitor the operation and safety of your vehicle’s many control systems. These units must work for the lifetime of your car, during which time they are subjected to many heating and cooling cycles. The most o... » read more

Designing Vehicles Virtually
By John Koon - 07 Sep, 2023 - Comments: 0

The shift toward software-defined vehicles (SDVs), electric vehicles (EVs), and ultimately autonomous vehicles (AVs) is proving the value and exposing the weaknesses in simulating individual components and complete vehicles. The ability to model this intensely complex maze of real-world interactions and possible scenarios is improving, and it's happening faster than comparable road-testing o... » read more

AI, Rising Chip Complexity Complicate Prototyping
By Karen Heyman - 24 Aug, 2023 - Comments: 0

Prototyping, an essential technology for designing complex chips in tight market windows, is becoming significantly more challenging for the growing number of designs that include AI/ML. Prototyping remains one of the foundational pillars of the whole shift left movement, allowing software to be developed and tested before actual silicon is available. That, in turn, enables multiple teams t... » read more

New Technology Accelerates Multi-Die System Simulation
By Taruna Reddy - 27 Jul, 2023 - Comments: 0

AI-powered chatbots. Robotic manufacturing equipment. Self-driving cars. Bandwidth-intensive applications like these are flourishing—and driving the move from monolithic system-on-chips (SoCs) to multi-die systems. By integrating multiple dies, or chiplets, into a single package, designers can achieve scaling of system functionality at reduced risk and with faster time to market. Multi-die... » read more

Study On HPC And Cloud Computing For Engineering Simulation
By Ansys - 19 Jul, 2023 - Comments: 0

In engineering applications, cloud computing can provide the on-demand compute power needed to run increasingly more complex simulations on a more frequent basis throughout the design cycle. Simulation plays an increasingly important role in the development of disruptive new technologies and systems such as autonomous vehicles, digital manufacturing, next-generation aircraft, and more. Rapid, h... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2025 SMG   |  Terms of Service  |  Privacy Policy