Mark LaPedus

(all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

450mm: Out Of Sync

By Mark LaPedus - 18 Jul, 2013 - Comments: 0

By Mark LaPedus The IC industry has been talking about it for ages, but vendors are finally coming to terms with a monumental shift in the business. The vast changes involve a pending and critical juncture, where the 450mm wafer size transition, new device architectures and other technologies will likely converge at or near the same time. In one possible scenario, 450mm fabs are projected ... » read more

MEMS Foundries Play Waiting Game

By Mark LaPedus - 18 Jul, 2013 - Comments: 0

By Mark LaPedus For years, the foundries in the microelectromechanical systems (MEMS) business have been patiently waiting for the MEMS integrated device manufacturers (IDMs) to outsource some or all of their production. The MEMS foundries are still waiting for that development. Because MEMS are custom devices tuned to a proprietary process and toolset, IDMs still prefer to use their own f... » read more

Manufacturing Bits: July 16

By Mark LaPedus - 16 Jul, 2013 - Comments: 0

Photon Chips Harvard University, the Massachusetts Institute of Technology (MIT) and the Vienna University of Technology have devised an all-optical transistor controlled by a single photon. The optical transistor could enable the development of photonic quantum gates and deterministic multi-photon entanglement. For years, researchers have been looking to develop an optical transistor, whe... » read more

The Week In Review: July 15

By Mark LaPedus - 15 Jul, 2013 - Comments: 0

By Mark LaPedus There are more problems surfacing with extreme ultraviolet (EUV) lithography. Yes, the light source remains a problem, but the resists appear to be in decent shape. “The next challenge is the mask blank,” said Stefan Wurm, director of Sematech’s lithography program. The new problem involves ion beam deposition, which apparently is causing defects and overfill on EUV masks... » read more

Manufacturing Bits: July 9

By Mark LaPedus - 09 Jul, 2013 - Comments: 0

Fishy Robots National University of Singapore (NUS) has developed a robotic fish that mimics the movements of a carp—a technology that could pave the way for more efficient autonomous underwater vehicles. This robot is classified as an autonomous underwater vehicle (AUV). Applications include military, pipeline leakage detection, and the laying of communication cable. The robot could be u... » read more

Mixed Signals

By Mark LaPedus - 08 Jul, 2013 - Comments: 0

By Mark LaPedus Based on the various forecasts for semiconductor equipment, the mood is mixed at this week’s Semicon West trade show in San Francisco. In its mid-year forecast, for example, SEMI predicts that the semiconductor equipment market will reach $36.3 billion in 2013, down 1.7% over 2012. But the business is expected to rebound and reach $43.98 billion in 2014, a 21.2 percent inc... » read more

The Week In Review: July 8

By Mark LaPedus - 08 Jul, 2013 - Comments: 0

By Mark LaPedus Fab tool vendors this week will gather at the annual Semicon West trade show in San Francisco. The mood is expected to be both gloomy and upbeat, at least based on one new and mixed forecast. The semiconductor equipment market is projected to fall 7.4% in 2013, but it will grow 27.1% in 2014, according to VLSI Research. The forecast for semis is up 10% in 2013 and 8.3% growth i... » read more

Inside A 450mm Metrology Consortium

By Mark LaPedus - 20 Jun, 2013 - Comments: 0

By Mark LaPedus Semiconductor Manufacturing & Design sat down to discuss 450mm metrology challenges with Menachem Shoval, a former manufacturing executive at Intel and chairman of the Metro450 consortium. The Israeli-based consortium is developing metrology technology for the next-generation, 450mm wafer size. The group consists of Intel, Applied Materials, Jordan Valley, Nanomotion, Nov... » read more

Consortium Mania Sweeps 450mm Landscape

By Mark LaPedus - 20 Jun, 2013 - Comments: 0

By Mark LaPedus In the mid-1990s, the semiconductor industry embarked on a costly and problematic migration from 200mm to 300mm wafer fabs. At the time, the 300mm development efforts were in the hands of two groups—Sematech and a Japanese-led entity. The equipment industry was on the outside looking in. And as a result, the migration from 200mm to 300mm fabs was out of sync and a nightma... » read more

Scaling The Lowly SRAM

By Mark LaPedus - 05 Jun, 2013 - Comments: 0

By Mark LaPedus Chipmakers face a multitude of challenges at the 20nm logic node and beyond, including the task of cramming more functions on the same chip without compromising on power and performance. There is one major challenge that is often overlooked in the equation—scaling the lowly static RAM (SRAM). In one key application, SRAM is the component used to make on-chip cache memories... » read more

← Older posts Newer posts →