tag: 16nm

What’s Different At 16/14nm?
By Ed Sperling - 28 May, 2015 - Comments: 0

Will finFETs live up to their promise? It depends on whom you ask, when you ask that question, and the intended application of a design. But across the semiconductor industry, there is general agreement that it's getting easier to work at the most advanced nodes as tools and flows are better understood and overall experience increases. There is no question that [getkc id="185" kc_name="finFE... » read more

Memory Design At 16/14nm
By Brian Bailey - 28 May, 2015 - Comments: 0

As we get older the memory may start to fade, but that is not a viable option if we are talking about embedded memory. Chips contain increasing amounts of memory, and for many designs memory consumes more than half of the total chip area. “At 28nm we saw a few people with greater than 400Mbits of memory on chip,” says Prasad Saggurti, product marketing manager for Embedded Memory IP at [... » read more

10nm Fab Challenges
By Mark LaPedus - 21 May, 2015 - Comments: 1

After a promising start in 2015, the semiconductor equipment industry is currently experiencing a slight lull. The pause is expected to be short-lived, however. Suppliers of [getkc id="208" comment="3D NAND"] devices are expected to add more fab capacity later this year. And about the same time, foundries are expected to order the first wave of high-volume production tools for 10nm. At 10nm... » read more

The Bumpy Road To 10nm FinFETs
By Mark LaPedus - 21 May, 2015 - Comments: 0

Foundry vendors are currently ramping up their 16nm/14nm [getkc id="185" kc_name="finFET"] processes in the market. Vendors are battling each other for business in the arena, although the migration from planar to finFETs is expected to be a slow and expensive process. Still, despite the challenges at 16nm/14nm, vendors are gearing up for the next battle in the foundry business—the 10nm nod... » read more

How Hard Is FD-SOI Design?
By Ann Mutschler - 21 May, 2015 - Comments: 0

Fully-depleted silicon-on-insulator ([getkc id="220" kc_name="FD-SOI"]) manufacturing technology reached of point of readiness for mass production at the end of March. Along with that, it’s now clear that while there are some impacts on the design flow, those impacts are not game changers. For one thing, the tools required are the same ones currently used for 28nm planar bulk CMOS. The onl... » read more

IP Market Shifts Direction
By Ed Sperling - 20 May, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss intellectual property changes and challenges with Patrick Soheili, vice president of product management and corporate development at [getentity id="22242" e_name="eSilicon"]; Navraj Nandra, senior director of marketing for DesignWare analog and MSIP at [getentity id="22035" e_name="Synopsys"]; Kurt Shuler, vice president of marketing at [getentity i... » read more

Rethinking Power
By Ed Sperling - 14 May, 2015 - Comments: 0

Power typically has been the last factor to be considered in the PPA equation, and it usually was somebody else's problem. Increasingly it's everyone's problem, and EDA companies are beginning to look at power differently than in the past. While the driving forces vary by market and by process node, the need to save energy at every node and in almost all designs is pervasive. In the server m... » read more

Trouble Ahead For IP industry?
By Brian Bailey - 14 May, 2015 - Comments: 0

[getkc id="106" kc_name="Power-aware design"] has risen from an afterthought to a primary design constraint for some design types. Initially it was smart phones and other battery operated devices. It has consistently expanded into additional areas including those plugged into the wall and those plugged into the grid. Some parts of the world are imposing restrictions on the power that a device c... » read more

FD-SOI Vs. FinFETs
By Ed Sperling - 13 May, 2015 - Comments: 3

Semiconductor Engineering sat down to compare the benefits, risks and challenges of moving to finFETs compared with fully depleted silicon on insulator ([getkc id="220" kc_name="FD-SOI"]) with Philippe Magarshack, group vice president for technology R&D at [getentity id="22331" comment="STMicroelectronics"]; Marco Brambilla, director of engineering at [getentity id="22150" e_name="Synapse D... » read more

One-On-One: Dark Possibilities
By Katherine Derbyshire - 29 Apr, 2015 - Comments: 0

Professor Michael Taylor’s research group at UC San Diego is studying ways to exploit dark silicon to optimize circuit designs for energy efficiency. He spoke with Semiconductor Engineering about the post-Dennard scaling regime, energy efficiency from integrated circuits all the way up to data centers, and how the manufacturing side can help. What follows are excerpts of that conversation. (P... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy