tag: automotive

2020 CEO Outlook
By Ed Sperling - 25 Jun, 2020 - Comments: 0

Semiconductor Engineering sat down to discuss the semiconductor industry's outlook and what's changing with Simon Segars, CEO of Arm; Joseph Sawicki, executive vice president of IC EDA at Mentor, a Siemens Business; Raik Brinkmann, CEO of OneSpin Solutions; Babak Taheri, CEO of Silvaco; John Kibarian, CEO of PDF Solutions; and Prakash Narain, CEO of Real Intent. The conversation was part of the... » read more

ML Opening New Doors For FPGAs
By Bryon Moyer - 24 Jun, 2020 - Comments: 0

FPGAs have long been used in the early stages of any new digital technology, given their utility for prototyping and rapid evolution. But with machine learning, FPGAs are showing benefits beyond those of more conventional solutions. This opens up a hot new market for FPGAs, which traditionally have been hard to sustain in high-volume production due to pricing, and hard to use for battery-dri... » read more

China Speeds Up Advanced Chip Development
By Mark LaPedus - 22 Jun, 2020 - Comments: 18

China is accelerating its efforts to advance its domestic semiconductor industry, amid ongoing trade tensions with the West, in hopes of becoming more self-sufficient. The country is still behind in IC technology and is nowhere close to being self-reliant, but it is making noticeable progress. Until recently, China’s domestic chipmakers were stuck with mature foundry processes with no pres... » read more

Improving Reliability For GaN And SiC
By Mark LaPedus - 18 Jun, 2020 - Comments: 2

Suppliers of gallium nitride (GaN) and silicon carbide (SiC) power devices are rolling out the next wave of products with some new and impressive specs. But before these devices are incorporated in systems, they must prove to be reliable. As with previous products, suppliers are quick to point out that the new devices are reliable, although there are some issues that can occasionally surface... » read more

The Future Of Mobility: Autonomous, Connected, Electric, Shared
By Bettina Weiss - 18 Jun, 2020 - Comments: 3

By Bettina Weiss and Sven Beiker As the amount of electronics in automobiles continues to increase, it is becoming more common to hear a vehicle referred to as a “computer on wheels.” To that end, innovation occurs at the intersection of automotive and microelectronics so that leveraging synergies and contemplating joint initiatives becomes crucial in shaping the future of both fields. I... » read more

Aging Problems At 5nm And Below
By Brian Bailey - 11 Jun, 2020 - Comments: 3

The mechanisms that cause aging in semiconductors have been known for a long time, but the concept did not concern most people because the expected lifetime of parts was far longer than their intended deployment in the field. In a short period of time, all of that has changed. As device geometries have become smaller, the issue has become more significant. At 5nm, it becomes an essential par... » read more

ESD Requirements Are Changing
By Bryon Moyer - 11 Jun, 2020 - Comments: 1

Standards for specifying a chip’s ability to withstand electrostatic discharge (ESD) are changing – in some cases, getting tougher, and in others, easing up. ESD protection has been on a path from a one-size-fits-all approach to one where a signal’s usage helps to determine what kind of protection it should get. Protecting chips from ESD damage has been a longstanding part of IC design... » read more

Fundamental Changes In Economics Of Chip Security
By Ed Sperling - 10 Jun, 2020 - Comments: 0

Protecting chips from cyberattacks is becoming more difficult, more expensive and much more resource-intensive, but it also is becoming increasingly necessary as some of those chips end up in mission-critical servers and in safety-critical applications such as automotive. Security has been on the semiconductor industry's radar for at least the past several years, despite spotty progress and ... » read more

Making Silicon Photonics Chips More Reliable
By Ed Sperling - 09 Jun, 2020 - Comments: 0

Silicon photonics has the ability to dramatically improve on-die and chip-to-chip communication within a package at extremely low power, but ensuring that signal integrity remains consistent over time isn't so simple. While this technology has been used commercially for at least the past decade, it never has achieved mainstream status. That's mostly due to the fact that Moore's Law scaling h... » read more

Using Fab Sensors To Reduce Auto Defects
By Anne Meixner - 09 Jun, 2020 - Comments: 0

The semiconductor manufacturing ecosystem has begun collaborating on ways to effectively use wafer data to meet the stringent quality and reliability requirements for automotive ICs. Silicon manufacturing companies are now leveraging equipment and inspection monitors to proactively identify impactful defects prior to electrical test. Using machine learning techniques, they combine the monitor ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy