Mark LaPedus

(all posts)
Mark LaPedus is Executive Editor for manufacturing at Semiconductor Engineering.

Author's Latest Posts

Manufacturing Bits: Aug. 15

By Mark LaPedus - 15 Aug, 2017 - Comments: 0

Self-collapse lithography The University of California at Los Angeles (UCLA) has developed a technology called self-collapse lithography. The technology, reported in the journal Nano Letters, resembles the combination of nanoimprint, selective removal and a chemical lift-off process. More specifically, though, the technology provides insights into patterning using a chemical lift-off lith... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 11 Aug, 2017 - Comments: 0

Fab tools Lam Research held an analyst event this week. The company indicated that the industry is in the midst of a memory boom, including both DRAM and 3D NAND. According to Amit Daryanani, an analyst with RBC, here was one of the big takeaways at the event: “The memory spend portion of WFE is more sustainable than previously assumed due to end-market drivers such as big data, automation, ... » read more

Manufacturing Bits: Aug. 8

By Mark LaPedus - 08 Aug, 2017 - Comments: 0

Ferroelectric films Ferroelectric RAM (FRAM) is creating a buzz again. For years, FRAMs have been shipping for embedded applications, although the technology has taken a backseat to MRAM, phase-change and ReRAM. Using a ferroelectric capacitor to store data, FRAM is a nonvolatile memory with unlimited endurance. FRAM is faster than EEPROM and flash. FRAM performs an over-write function in ... » read more

Cheaper Fan-Outs Ahead

By Mark LaPedus - 07 Aug, 2017 - Comments: 6

Packaging houses continue to ramp up fan-out wafer-level packages in the market, but customers want lower cost fan-out products for a broader range of applications, such as consumer, RF and smartphones. So in R&D, the industry for some time has been developing next-generation fan-out using a panel-level format, a technology that could potentially lower the cost of fan-out. But there are ... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 04 Aug, 2017 - Comments: 0

Chipmakers The situation between Toshiba and its fab partner, Western Digital (WD), has gone from bad to worse. As reported, troubled Toshiba recently selected a group to buy its memory business. The consortium includes the Innovation Network Corp. of Japan, the Development Bank of Japan and Bain Capital. Rival SK Hynix is also part of the group. WD attempted but failed to buy the unit, an... » read more

Manufacturing Bits: Aug. 1

By Mark LaPedus - 01 Aug, 2017 - Comments: 0

Magnetic chips HRL Laboratories—an R&D venture between Boeing and General Motors—has been awarded a contract to develop a new class of magnetic integrated components. HRL has received the award from the Defense Advanced Research Project Agency (DARPA) under the Magnetic, Miniaturized, and Monolithically Integrated Components (M3IC) program. The goal is to develop new magnetic materials... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 28 Jul, 2017 - Comments: 0

Chipmakers UMC has generated sales from its recently-announced 14nm finFET technology. The foundry vendor also plans to enter the 22nm process technology market. UMC will join other players in the 22nm arena, such as GlobalFoundries, Intel and TSMC. “So we do have a plan to introduce our 22nm as well and it will be available around 2018,” said Jason Wang, the newly appointed co-president o... » read more

Manufacturing Bits: July 25

By Mark LaPedus - 25 Jul, 2017 - Comments: 0

Metrology for the intelligence community The semiconductor industry continues to move full speed ahead with traditional chip scaling. There are several challenges in the arena. One of the big but lessor known challenges is metrology. Metrology, the science of characterizing and measuring films and structures, is becoming more complex, challenging and expensive at each node. Looking to solv... » read more

What’s After FinFETs?

By Mark LaPedus - 24 Jul, 2017 - Comments: 3

Chipmakers are readying their next-generation technologies based on 10nm and/or 7nm finFETs, but it's still not clear how long the finFET will last, how long the 10nm and 7nm nodes for high-end devices will be extended, and what comes next. The industry faces a multitude of uncertainties and challenges at 5nm, 3nm and beyond. Even today, traditional chip scaling continues to slow as process ... » read more

The Week In Review: Manufacturing

By Mark LaPedus - 21 Jul, 2017 - Comments: 1

Fab equipment ASML posted strong sales in the quarter and is apparently nearly sold out of scanners based on extreme ultraviolet (EUV) lithography, according to analysts. “ASML posted strong 2Q results and 2Q guidance, providing further evidence that demand remains high for semiconductor equipment,” said Weston Twigg, an analyst with KeyBanc Capital Markets, in a research note. “Demand d... » read more

← Older posts Newer posts →