RISC-V Becoming Less Risky With The Right Verification
By Rob van Blommestein - 25 Jan, 2021 - Comments: 1

RISC-V continues to make headlines across the electronic design industry. You may have seen the recent news that the OpenHW Group is delivering their first RISC-V core, the CV32E40P. If you attended last month’s RISC-V Summit, perhaps you attended “CORE-V: Industrial Grade Open-Source RISC-V Cores” by Rick O’Connor, president of the OpenHW Group. In this session, Rick discussed how the ... » read more

New Transistor Structures At 3nm/2nm
By Mark LaPedus - 25 Jan, 2021 - Comments: 12

Several foundries continue to develop new processes based on next-generation gate-all-around transistors, including more advanced high-mobility versions, but bringing these technologies into production is going to be difficult and expensive. Intel, Samsung, TSMC and others are laying the groundwork for the transition from today’s finFET transistors to new gate-all-around field-effect trans... » read more

Week In Review: Manufacturing, Test
By Mark LaPedus - 22 Jan, 2021 - Comments: 0

Chipmakers Intel posted its quarterly results. But the big question is whether the chip giant will outsource more of its production to the foundries. As reported, Intel has fallen behind TSMC and Samsung in process technology. And Intel may need to outsource some of its chip production to stay ahead. All of this rests on Pat Gelsinger, the new CEO at Intel. Gelsinger will be taking over for... » read more

Week In Review: Design, Low Power
By Jesse Allen - 22 Jan, 2021 - Comments: 0

Cadence will acquire NUMECA International, a provider of computational fluid dynamics (CFD), mesh generation, multi-physics simulation, and optimization solutions for industries including aerospace, automotive, industrial, and marine. “Next-generation products and systems require comprehensive multi-physics engineering solutions encompassing IP, semiconductors, IC packaging, modules, board... » read more

Week In Review: Auto, Security, Pervasive Computing
By SE Staff - 22 Jan, 2021 - Comments: 0

Automotive/Mobility Former U.S. president Donald Trump pardoned the former Google engineer who plead guilty to taking Google’s self-driving car trade secrets before becoming the head of Uber Technologies’ self-driving car unit. Anthony Levandowski was sentenced 18 months in prison in August after pleading guilty in March to one count of a 33-charge indictment, according to a story in Reute... » read more

Fearless Chip Forecasts For 2021
By Mark LaPedus - 21 Jan, 2021 - Comments: 0

It’s been a roller coaster ride in the semiconductor industry. In early 2020, the semiconductor business looked bright, but then the Covid-19 pandemic struck, causing a sudden downturn. By mid-2020, though, the market bounced back, as the stay-at-home economy drove demand for computers, tablets and TVs. The chip market ended on a high note in 2020, but the question is, what’s in store fo... » read more

A Look Inside ADAS Modules
By Prasad Dhond - 21 Jan, 2021 - Comments: 0

You glance down at your phone while rolling in slow-moving traffic. Against your better judgment, you proceed to read your latest email, oblivious to the fact that the car in front of you has braked. In the nick of time, your car starts beeping and flashing. You look up and slam the brakes. Whew! That was close. If this has happened to you, don't forget to thank the radar and camera modules in ... » read more

The Chip Industry’s Next-Gen Roadmap
By Mark LaPedus - 21 Jan, 2021 - Comments: 1

Todd Younkin, the new president and chief executive of the Semiconductor Research Corp. (SRC), sat down with Semiconductor Engineering to talk about engineering careers, R&D trends and what’s ahead for chip technologies over the next decade. What follows are excerpts of that conversation. SE: As a U.S.-based chip consortium, what is SRC's charter? Younkin: The Semiconductor Research... » read more

An Introduction To Virtual Semiconductor Process Evaluation
By Jeonghoon (James) Kim - 21 Jan, 2021 - Comments: 0

Process engineers develop ideal solutions to engineering problems using a logical theoretical framework combined with logical engineering steps. Unfortunately, many process engineering problems cannot be solved with a brute force, step by step approach to understand every cause-and-effect relationship. There are simply too many process recipe variables that can be modified to make a brute-force... » read more

Eyes On Zero Defects: Defect Detection And Characterization Metrology
By Darin Collins - 21 Jan, 2021 - Comments: 0

By Darin Collins and Jessica Albright Metrology is the science of measuring, characterizing, and analyzing materials. Within metrology, there are several technologies used to detect material defects on a very small scale – precision on the scale of parts per trillion or less is necessary in the pursuit of zero defects. We broadly define our characterization approach into three main categor... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy