category: Blogs – LPHP

category: Auto, Security & Edge AI

Confronting Design Challenges With Smaller Thermal Envelopes
By James Bruce - 11 Aug, 2016 - Comments: 0

For design engineers, physics giveth but physics can also taketh away. Consider leading-edge smartphones. Outside the improved performance that each generation gives consumers, the handsets themselves get thinner, sleeker, lighter. The reduction in the Z height is effectively a given with each new generation. In 2010, the HTC Nexus One was 11.5mm thick; this year, the Mate 8 is 7.9mm. Rem... » read more

Optimizing Emulator Utilization
By Russell Klein - 11 Aug, 2016 - Comments: 0

The growing pressures of market schedules, design complexity and the ever-increasing amount of embedded software in today’s SoCs has put verification in the hot-seat. Now that new emulation tools can link hardware and software verification, SoC designers are turning to emulation more than ever before to debug embedded software. The standard method for debugging software with an emulator is wi... » read more

Architecting Memory For Next-Gen Data Centers
By Frank Ferro - 26 Jul, 2016 - Comments: 2

The industry’s insatiable appetite for increased bandwidth and ever-higher transfer rates is driven by a burgeoning Internet of Things (IoT), which has ushered in a new era of pervasive connectivity and generated a tsunami of data. In this context, datacenters are currently evaluating a wide range of new memory initiatives. All seek to optimize efficiency by reducing data transport, thus sign... » read more

Energy-Efficient Design Helps Autonomous Vehicles Take Off
By Margaret Schmitt - 18 Jul, 2016 - Comments: 1

A new flight endurance record was set recently by the Predator B/MQ-9 Reaper Big Wing experimental drone, traveling 37 hours non-stop, and setting the bar for the next stage of autonomous flight development. The growth of drone technology and their autonomous capabilities for surveillance, security, and reconnaissance has grown rapidly over the past several years, thanks to ever-increasing perf... » read more

Power Confounds, Challenges
By Ann Mutschler - 14 Jul, 2016 - Comments: 0

I have to admit I’m always surprised to hear that design teams are not using tools to the fullest extent possible, leaving valuable power saving opportunities on the table, until I remember how daunting it is to get it all right without tremendous experience, expertise, and the right tools. I’m also always fascinated to learn about less-obvious effects from power. To this point, Aveek... » read more

Better PMIC Design Using Multi-Physics Simulation
By Karthik Srinivasan - 14 Jul, 2016 - Comments: 1

Energy efficiency and thermal management are gaining importance in the IC and system design community. Because the integrated circuit is the major source of power consumption and hence heat dissipation, semiconductor companies are under immense pressure to reduce the overall power envelope of the IC that goes into the system. This phenomenon is seen globally, irrespective of whether the chip... » read more

Designing Power-Efficient, Implantable Medical Devices
By Christine Young - 14 Jul, 2016 - Comments: 0

Medical devices used for treatment traditionally tend to be big, bulky, and full of wires, making them uncomfortable or inconvenient for the patient to use. For Dr. Rikky Muller and Cortera Neurotechnologies, power-efficient, implantable medical devices provide a viable alternative. Muller is an assistant professor of electrical engineering and computer sciences at UC Berkeley. She is also a... » read more

Addressing The Challenges Of Automotive Motor Control
By Ahmed Eisawy - 14 Jul, 2016 - Comments: 0

By Andrew Talan and Ahmed Eisawy As you leave work today and enter the parking lot, you hit the unlock button on your car remote. Using the power lift to open the hatch back, you put your laptop bag in the back of the car. While seated in the car, you adjust your seat position and bump your driver-side mirror into a new position and then head for home. You probably don’t think much about y... » read more

How To Scale IoT For “Time To Money,” Security
By Brian Fuller - 14 Jul, 2016 - Comments: 0

When it comes to design, IoT can be boiled down to “time to money.” It’s more complex than that, of course, but the unique, dynamic nature of the segment is changing the way we design systems and how we think about security. “IoT is not a device. It’s delivering service across the cloud to connected devices,” said Nandan Nayampally, vice president of marketing with ARM. “In the... » read more

The Indisputable Case For USB 2.0 Type-C In IoT Applications
By Eric Huang - 14 Jul, 2016 - Comments: 0

USB is ubiquitous for a reason – It was designed specifically to be easy for consumers to use. When designers working in the fast-growing Internet of Things (IoT) market are looking for interfaces that can help with everything from charging to data transfer, USB is top-of-mind. However, IoT applications have performance, power and area requirements that are quite different from your phone or ... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy