tag: Samsung

Gaps In Metrology Could Impact Yield
By Mark LaPedus - 17 Apr, 2014 - Comments: 0

For some time, chipmakers have been developing new and complex chip architectures, such as 3D NAND, finFETs and stacked die. But manufacturing these types of chips is no simple task. It requires a robust fab flow to enable new IC designs with good yields. In fact, yield is becoming a more critical part of the flow. Yield is a broad term that means different things to different parts of the ... » read more

Billions And Billions Invested
By Mark LaPedus - 17 Apr, 2014 - Comments: 4

Over the years, next-generation [getkc id="80" kc_name="lithography"] (NGL) has suffered various setbacks and delays. But until recently, the industry basically shrugged its shoulders and expressed relatively little anxiety about the NGL delays. After all, optical lithography was doing the job in the fab and NGL would eventually materialize. Today, however, the mood is different. In fact, th... » read more

Time To Revisit 2.5D And 3D
By Mark LaPedus - 17 Apr, 2014 - Comments: 2

Chipmakers are reaching various and challenging inflection points. In logic, many IC makers face a daunting transition from planar transistors at 20nm to finFETs at 14nm. And on another front, the industry is nearing the memory bandwidth wall. So perhaps it’s time to look at new alternatives. In fact, chipmakers are taking a hard look, or re-examining, one alternative—stacked 2.5D/3D chi... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 11 Apr, 2014 - Comments: 0

Don't look now, but the fab tool market is slowing. "After recent meetings in the supply chain plus examining comments from the largest spenders, we conclude that wafer fab equipment (WFE) could disappoint this year. We calculate approximately $30 billion to $31 billion in WFE spending in 2014, flattish from 2013, compared to expectations of $32 billion to $33 billion, which would be up 10%+. T... » read more

Manufacturing Bits: April 8
By Mark LaPedus - 08 Apr, 2014 - Comments: 0

Making cheap diamonds Graphite and diamonds are two forms of the same element--carbon. In graphite, carbon atoms are arranged in planar sheets and the material is soft. On the other hand, diamonds consist of carbon atoms that are bonded in all directions, making these structures extremely hard. [caption id="attachment_11311" align="alignleft" width="150"] This illustration shows four layers... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 04 Apr, 2014 - Comments: 1

GlobalFoundries has emerged as the leading candidate to buy IBM's semiconductor unit, according to Reuters, which cited the Wall Street Journal as it source. IBM, which recently put its semiconductor unit on the block, has held discussions with GlobalFoundries, Intel and Taiwan Semiconductor Manufacturing Co. Ltd. GlobalFoundries did not respond to the reports by press time. GlobalFoundries ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 28 Mar, 2014 - Comments: 0

RBC Capital Markets has raised its iPhone unit forecast for 2014 to 159.1 million from 156.7 million. The iPhone estimates reflect better-than-expected growth in the September quarter, according to RBC. So which chipmakers will benefit? In order, the companies with the most exposure into Apple are Cirrus Logic, Dialog Semiconductor, Triquint, Skyworks, Audience, Avago, Broadcom, Qualcomm, SanDi... » read more

Directed Self-Assembly Gains Momentum
By Mark LaPedus - 20 Mar, 2014 - Comments: 0

At last year’s SPIE Advanced Lithography symposium, directed self-assembly (DSA) grabbed the spotlight as chipmakers provided the first glimpse of their initial work and results with the technology. The results were stunning, thereby propelling DSA from a curiosity item to a possible patterning solution for next-generation devices. Last year, in fact, GlobalFoundries, IBM, Intel and Sams... » read more

Enabling Wearable Electronics In The Internet of Things (IoT) Era
By Bharat Ramakrishnan - 20 Mar, 2014 - Comments: 0

As part of its growth focus for Applied Materials, the Office of the CTO (Chief Technology Officer) aims to do the following: Identify, incubate and commercialize growth opportunities in new and adjacent markets Build a culture of open innovation at Applied Materials Address market inflections and high value problems through differentiated solutions Shape the future of our growth mark... » read more

Test Challenges Rising For Mobile Devices
By Mark LaPedus - 20 Mar, 2014 - Comments: 0

Smartphone and tablets continue to advance at a dizzying pace. On the component side alone, the latest mobile devices are moving towards 64-bit application processors, multi-mode RF front-ends, higher-end cameras and flashy LCD screens. Some systems even boast fingerprint scanners and heart rate sensors. But an obvious part of the system continues to lag behind the curve—battery life. In r... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy