tag: Samsung

The Week In Review: Manufacturing
By Mark LaPedus - 24 Dec, 2015 - Comments: 0

South Korea’s SK Hynix led the initial charge in the development of High Bandwidth Memory (HBM), a 3D DRAM technology based on a memory stack and through-silicon vias (TSVs). SK Hynix has been shipping HBM parts in the market. Now, SK Hynix and Samsung are readying the next version of the technology, dubbed High Bandwidth Memory 2 or HMB2, according to a report from The Electronic Times of So... » read more

Reflections On 2015
By Brian Bailey - 22 Dec, 2015 - Comments: 0

It is easy to make predictions, but few people can make them with any degree of accuracy. Most of the time, those predictions are forgotten by the end of the year and there is no one to do a tally of who holds more credibility for next year. Not so with SemiEngineering. We like to hold people's feet to the fire, but while the Pants-On-Fire meter may be applicable to politicians, we like to thin... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 18 Dec, 2015 - Comments: 1

Samsung plans to make a major entry into the drone market, according to reports. “Samsung is not alone in focusing on the drone market,” said Will Strauss, president of Forward Concepts, in a research note. “At CES next month in Las Vegas, one can expect new products from drone market leader DJI, but dozens of new drone models from Parrot and many other companies. Even GoPro chip maker A... » read more

What’s Next In Mobile Displays
By Mark LaPedus - 17 Dec, 2015 - Comments: 0

The next wave of smartphones and wearables is invading the market. These systems will feature a new class of high-resolution displays, and in the near future displays will become foldable and rollable, although there are still some challenges with this technology. To be sure, mobile display technology is advancing on several fronts. On one front, for example, Apple and other systems vendor... » read more

Foundries Face Challenges in 2016
By Mark LaPedus - 17 Dec, 2015 - Comments: 2

Generally, 2015 has been a challenging year in the foundry business. For one thing, the foundry industry will register modest growth in 2015. In addition, the foundry customer base is consolidating. And on the leading edge, foundries took longer than expected to ramp up their 16nm/14nm finFET processes. So, after an eventful year in 2015, what’s in store for the foundry business in 2016? I... » read more

Manufacturing Bits: Dec. 15
By Mark LaPedus - 15 Dec, 2015 - Comments: 0

DRAM scaling sans EUV At the recent IEEE International Electron Devices Meeting (IEDM) in Washington, D.C., chipmakers presented papers on several technologies, including one unlikely topic—DRAM scaling. For years, it was believed that DRAMs would hit the wall and stop scaling at 20nm or so. Then, at that point, the industry would need to migrate to a 3D DRAM structure or a next-generatio... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 11 Dec, 2015 - Comments: 0

In 2015, Korea outspent all other countries ($9 billion) on front-end semiconductor fab equipment, according to SEMI. But Korea is expected to drop to second place in 2016, as Taiwan takes over with the largest CapEx spending at $8.3 billion, according to SEMI. In 2015, Americas ranked third in overall regional CapEx spending with about $5.6 billion and is forecast to increase only slightly to ... » read more

Chasing After Phantom Power
By Brian Bailey - 10 Dec, 2015 - Comments: 1

A lot of effort is being invested in power reduction techniques for mobile devices, where battery life is an important buying decision and power can translate into heat that can make a device uncomfortable to use. But are people willing to pay more for a device that consumes less power if it's plugged into a wall? And even if they are concerned about the power drawn during operation, what ab... » read more

Reflections On 2015
By Brian Bailey - 10 Dec, 2015 - Comments: 0

It is easy to make predictions, but few people can make them with any degree of accuracy. Most of the time, those predictions are forgotten by the end of the year and there is no one to do a tally of who holds more credibility for next year. Not so with Semiconductor Engineering. We like to hold people's feet to the fire, but while the "Pants-On-Fire" meter may be applicable to politicians, we ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 04 Dec, 2015 - Comments: 2

For years, China has been trying to get a domestic IC equipment industry off the ground, but it has experienced modest success in the arena. Now, China may take a new strategy—acquire fab tool makers. In what could be a sign of things to come, China’s Beijing E-Town Dragon Semiconductor Industry Investment Center has entered into a definitive agreement to acquire U.S.-based fab tool vendor ... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy