category: Top Stories

category: Auto, Security & Edge AI

Keeping Pace With Moore’s Law
By Ann Mutschler - 19 Dec, 2012 - Comments: 0

By Ann Steffora Mutschler As the number of transistors doubles with each move to a smaller manufacturing process technology, there are questions as to whether the current cadre of place and route tools will be able to keep in lock step. Have no fear, assured Saleem Haider, senior director of marketing for physical design and DFM at Synopsys. “For the increase in densities that we get with... » read more

To Shrink Or Not To Shrink…And How Much?
By Ed Sperling - 29 Nov, 2012 - Comments: 0

By Ann Steffora Mutschler The 28nm semiconductor manufacturing node is in full swing with 20nm process development ramping quickly. As such, the industry has been looking ahead to the next node shrink to achieve the power, performance and cost advantages that a node shrink promises. However, as we are well aware by now, traditional CMOS planar technology is not scaling as it did in previous ge... » read more

MEMS Goes Mainstream
By Ed Sperling - 29 Nov, 2012 - Comments: 0

By Cheryl Coupé Micro-electromechanical systems (MEMS) are well known for enabling innovative capabilities for devices that range from vehicles and gaming to smartphones and tablets—and increasingly in personal health and fitness, security, and environmental applications. As stacked die become more popular, they also will become part of the integration challenge that chipmakers will wrestle... » read more

Engineering Change Orders Revisited
By Ed Sperling - 29 Nov, 2012 - Comments: 0

By Ed Sperling The perennial nightmare of the marketing head reporting that a customer will buy a design—but only if it fits into a specific power envelope or has better performance or I/O—is all too familiar to engineering teams. In theory, using more third-party IP should help alleviate this problem because the IP can be changed out relatively easily. The reality, though, is that it�... » read more

Prototyping Now A ‘Must Have’
By Ed Sperling - 29 Nov, 2012 - Comments: 0

By Ann Steffora Mutschler No longer a ‘nice to have,’ FPGA-based prototyping is now indispensible for SoC and ASIC development. Semiconductor companies are investing in the infrastructure, the EDA tool chain, the human resources and everything needed to set up an entire department to focus on prototyping, emulation and validation. “We are seeing these customers invest in significant a... » read more

The Essential Tool Kit
By Ed Sperling - 25 Oct, 2012 - Comments: 0

By Ann Steffora Mutschler Is there an essential chip design tool kit today that has only the ‘must haves?’ Sure, this sounds like a straightforward question, but the answer really depends on what process node the design will be manufacturing on. According to Jon McDonald, technical marketing engineer for the design and creation business at Mentor Graphics, there’s actually nothi... » read more

The New Mixed-Signal Flow
By Ed Sperling - 25 Oct, 2012 - Comments: 0

By Ann Steffora Mutschler We are on the cusp of the mixed-signal era. Traditional mixed-signal design environments, in which analog and digital parts are implemented separately, no longer are sufficient. They lead to excess iteration and prolonged design cycle time. Today’s mixed-signal designs require a new approach that enables design teams to be as efficient as possible productivity... » read more

The Growing Confidence Gap In Verification
By Ed Sperling - 25 Oct, 2012 - Comments: 0

By Ed Sperling It’s no surprise that verification is getting more difficult at each new process node. What’s less obvious is just how deep into organizations the job of verifying SoCs and ASICs now extends. Functional verification used to be a well-defined job at the back end of the design flow. It has evolved into a multi-dimensional, multi-group challenge, beginning at the earliest st... » read more

Calculating Emulation’s Complex Cost Of Ownership
By Ed Sperling - 25 Oct, 2012 - Comments: 0

By Ann Steffora Mutschler Hardware emulation or hardware-assisted verification –whichever term you choose—has been around for decades. But until recently it has seen only modest adoption due to the high cost, long set-up time, power and IT requirements, among other things. But with simulation running out of steam between 50 and 100 million gates, this specialized hardware makes a ... » read more

Quantum Shifts
By Ed Sperling - 25 Oct, 2012 - Comments: 0

By Ed Sperling Intel, STMicroelectronics and some of the leading memory providers already are working on 10nm process technology, and advanced researchers in universities and industry-leading companies are looking at 7nm, 5nm and even beyond. Those who have glimpsed this technological future have similar observations. There is no single technology problem that has to be solved at these node... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy