category: Top Stories

category: Auto, Security & Edge AI

Problems Ahead For EDA
By Brian Bailey - 27 Apr, 2015 - Comments: 0

You may have discovered that the Semiconductor Engineering Knowledge Center (KC) provides various ways in which data can be viewed. One way is to see what events happened in a given year. During the 1990s, company activity in terms of new startups and acquisitions reached a peak, and in 1997 there were at least 29 startups that the KC contains and 25 companies acquired (let us know if there wer... » read more

What Not To Verify
By Ann Mutschler - 23 Apr, 2015 - Comments: 0

It is well understood that [getkc id="10" kc_name="verification"] is all about mitigating and managing risk, and success here begins with a good verification planning process. During the planning process, the project team creates a list of specific design functions and use cases that must be verified—and they identify the technique used to verify each specific item on the list. That list c... » read more

What EDA’s Big 3 Think Now
By Ed Sperling - 23 Apr, 2015 - Comments: 0

In the past two months the CEOs of Cadence, Synopsys and Mentor Graphics delivered their annual high-level messages to their respective user groups. Semiconductor Engineering attended all of the speeches at these conferences, as it did in 2014 (see story here). From a high level, the big issues for CEOs last year were Moore's Law, the costs of design, the impact of low power, and business-... » read more

Is Art Acceptable In Verification?
By Brian Bailey - 23 Apr, 2015 - Comments: 0

The industry appears to have accepted that [getkc id="10" kc_name="verification"] involves art as well as science. This is usually based on one of three reasons, namely: the problem is large and complex; there is a lack of understanding and tools that enable it to be automated; and if it could be made a science, all of the jobs would have migrated offshore. Today, designs are built from pre-... » read more

Pressure Builds To Revamp The Design Flow
By Ed Sperling - 23 Apr, 2015 - Comments: 1

Without [getkc id="7" kc_name="EDA"] there would be no [getkc id="74" comment="Moore's Law"] as we know it today, and without Moore's Law there would be a much more limited need for EDA. But after more than three decades of developing design flows packed with sophisticated tools to automate semiconductor design through verification, and thereby enable feature shrinks that are the basis of Moore... » read more

Blurring The Lines On Prototyping
By Ann Mutschler - 23 Apr, 2015 - Comments: 0

Prototyping is an integral part of every [getkc id="81" kc_name="SoC"] today, with two main approaches being used: virtual or software-based, and physical, which includes FPGA-based boards as well as hardware emulation systems. [getkc id="104" kc_name="Virtual prototyping"] is typically used for software development in the early stages of SoC design, even before SoC [getkc id="49" kc_name="R... » read more

Ecosystem Changes
By Ed Sperling - 15 Apr, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss changes in the semiconductor ecosystem with Kelvin Low, senior director of foundry marketing at [getentity id="22865" e_name="Samsung Semiconductor"]; John Costello, vice president of product planning at [getentity id="22849" e_name="Altera"]; Randy Smith, vice president of marketing at [getentity id="22605" e_name="Sonics"], and Michiel Ligthart, p... » read more

Ecosystem Changes
By Ed Sperling - 07 Apr, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss changes in the semiconductor ecosystem with Kelvin Low, senior director of foundry marketing at [getentity id="22865" e_name="Samsung Semiconductor"]; John Costello, vice president of product planning at [getentity id="22849" e_name="Altera"]; Randy Smith, vice president of marketing at [getentity id="22605" e_name="Sonics"], and Michiel Ligthart, p... » read more

First Time Success and Cost Control
By Brian Bailey - 01 Apr, 2015 - Comments: 0

First time success has been the ultimate goal for semiconductor companies due to escalating mask costs, as well as a guiding objective for the development of EDA tools, especially in the systems and verification space. These pressures are magnified for the [getkc id="76" comment="Internet of Things"] (IoT), especially the edge devices. Have system-level tools been able to contribute to first ti... » read more

Architecturally Optimizing Memory Bandwidth
By Ann Mutschler - 27 Mar, 2015 - Comments: 0

Making sure that an SoC’s [getkc id="22" kc_name="memory"] bandwidth is optimized is a crucial part of the design process today given its significance toward overall system performance. There are many ways to approach this issue, and all of them can have a direct bearing on the competitiveness of a chip in terms of both power and performance. So where should you start? “Number one, c... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy