category: Top Stories

category: Auto, Security & Edge AI

Alternative Channel Materials For Post-Silicon FinFETs
By Katherine Derbyshire - 16 Dec, 2013 - Comments: 4

At first glance, other semiconductors always have looked more attractive to device designers than silicon. Both germanium and III-V compound semiconductors have higher carrier mobility, allowing faster switching at the same device size. And yet, as manufacturers begin to consider alternative channel materials for sub-10nm devices, the industry is remembering why silicon became a standard in ... » read more

Experts At The Table: MEMS Challenges
By Mark LaPedus - 13 Dec, 2013 - Comments: 1

Semiconductor Engineering sat down to discuss the challenges of MEMS with Rakesh Kumar, senior director of the MEMS program at GlobalFoundries; Tak Tanaka, managing director for Applied Global Services at Applied Materials; Paul Lindner, executive technology director at EV Group; and Alissa M. Fitzgerald, founder and managing member at A.M. Fitzgerald & Associates. SE: What’s happening... » read more

Can Intel Dethrone The Foundry Giants?
By Mark LaPedus - 12 Dec, 2013 - Comments: 3

The leading-edge foundry business isn’t for the faint of heart. It requires deep pockets and sound technology to keep pace in the chip-scaling race. And despite pouring billions of dollars into new fabs and processes, foundries are competing for fewer customers at each node. Given the difficult business conditions, only a handful of vendors can afford to compete in the high-end foundry bus... » read more

DSA, Multi-beam Make Steady Progress
By Mark LaPedus - 12 Dec, 2013 - Comments: 0

Semiconductor Engineering sat down to discuss current and future lithography challenges with Laurent Pain, lithography lab manager at CEA-Leti. What follows are excerpts of that conversation. SE: CEA-Leti has two major programs in lithography. One is in directed self-assembly (DSA) and the other is in multi-beam e-beam. Let’s start with multi-beam. What is Leti doing in multi-beam and what... » read more

Challenges Mount In Inspection And Metrology
By Mark LaPedus - 12 Dec, 2013 - Comments: 0

Chipmakers are moving full speed ahead toward smaller process nodes, thereby driving up the costs and complexities in chip manufacturing. The migrations also are putting enormous stress on nearly all points of the fab flow, including a critical but unsung part of the business—process control. Process control involves 20 or so different segments in the inspection and metrology arena. Genera... » read more

Experts At The Table: Yield And Reliability Issues With Integrating IP
By Ed Sperling - 12 Dec, 2013 - Comments: 0

Semiconductor Engineering sat down to discuss the impact of integrating IP in complex SoCs with Juan Rey, senior director of engineering at Mentor Graphics; Kevin Yee, product marketing director for Cadence’s SoC Realization Group; and Mike Gianfagna, vice president of marketing at eSilicon. What follows are excerpts of that conversation. SE: As more pieces are integrated into complex SoCs... » read more

Non-Visual Defect Inspection: The Tech of Tomorrow?
By Jeff Chappell - 12 Dec, 2013 - Comments: 0

Remember when it first became obvious that the semiconductor manufacturing industry was going to expect lithography to resolve features smaller than the wavelength of light used in the litho tools themselves? Thanks to techniques such as the use of phase shift photomasks, sub-wavelength lithography is standard in chip fabs today. It might even be viewed as “old hat,” although still an ex... » read more

Experts At The Table: What’s Missing In The IoT
By Ed Sperling - 11 Dec, 2013 - Comments: 0

Semiconductor Engineering sat down to discuss the future of the IoT with Oleg Logvinov, director of market development for STMicroelectronics’ Industrial and Power Conversion Division; Martin Lund, senior vice president of the IP Group at Cadence; Naveed Sherwani, president and CEO of Open-Silicon; and Damon Hernandez, a member of the Web3D Consortium. What follows are excerpts of that conver... » read more

Big Changes Rock Global Smartphone Market
By Jeff Chappell - 09 Dec, 2013 - Comments: 0

It's not just consumers that are benefiting from the proliferation of low-cost mobile multiple-core processors. Chipmakers are reaping the benefits of the booming smartphone market in Asia and around the globe. In the multicore smartphone applications processor market Qualcomm. leads the way with its Snapdragon processors; it accounted for 43% of the market in the first half of this year, fo... » read more

The Path To Power Signoff Is Getting Longer
By Ed Sperling - 06 Dec, 2013 - Comments: 0

Signoff on power used to be a fairly simple check-the-box kind of activity. Even if power budgets weren’t exactly met, they could usually be fixed in future iterations of a chip, whether that involved derivatives or new revs of the same chip. A number of things have changed since the much simpler days of 45/40nm and above, however. Power is now a market differentiator. In many cases, i... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy