tag: Applied Materials

The Trouble With MEMS
By Ed Sperling - 25 May, 2016 - Comments: 0

The advent of the Internet of Things will open up a slew of new opportunities for MEMS-based sensors, but chipmakers are proceeding cautiously. There are a number of reasons for that restraint. Microelectromechanical systems are difficult to design, manufacture and test, which initially fueled optimism in the MEMS ecosystem that this market would command the same kinds of premiums that analo... » read more

Blog Review: May 25
By Jesse Allen - 25 May, 2016 - Comments: 0

As a prelude of drone delivery, shipping company DHL set up a carbon fiber tilt-rotor to ferry packages between two villages in the Alps, in this week's top five tech picks from Ansys' Bill Vandermark. Plus, IBM's phase-change memory, see-through wood that's stronger than glass, and perhaps a Babel fish. There have been considerable investments in new memories, but getting to them won't be a... » read more

RC Delay: Bottleneck To Scaling
By Rajkumar Jakkaraju - 24 May, 2016 - Comments: 1

R = resistance — the difficulty an electrical current has in passing through a conducting material. C = capacitance — the degree to which an insulating material holds a charge. RC delay = the delay in signal speed through the circuit wiring as a result of these two effects. RC delay is important because it can become a significant obstacle to continued downward scaling of logic and... » read more

How To Make 3D NAND
By Mark LaPedus - 23 May, 2016 - Comments: 0

In 2013, Samsung reached a major milestone in the IC industry by shipping the world’s first 3D NAND device. Now, after some delays and uncertainty, Intel, Micron, SK Hynix and the SanDisk/Toshiba duo are finally ramping up or sampling 3D NAND. 3D NAND is the long-awaited successor to today’s planar or 2D NAND, which is used in memory cards, solid-state storage drives (SSDs), USB flash dr... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 20 May, 2016 - Comments: 0

Chipmakers IC Insights released its top chip makers in terms of sales for the first quarter of 2016. The top-20 ranking includes three pure-play foundries (TSMC, GlobalFoundries, and UMC) and six fabless companies. Intel remained in the top spot, followed in order by Samsung and TSMC. The biggest movers in the ranking were made by the new Broadcom (Avago/Broadcom) and Nvidia. Broadcom jumped f... » read more

What’s Next For NAND?
By Mark LaPedus - 19 May, 2016 - Comments: 2

NAND flash memory is a key enabler in today’s systems, but it’s a difficult business. NAND suppliers require deep pockets and strong technology to survive in the competitive landscape. And going forward, vendors face new challenges on several fronts. On one front, for example, the overall NAND market is currently in the doldrums, amid soft product prices and a mild capacity glut. Demand ... » read more

What Happened To DSA?
By Mark LaPedus - 19 May, 2016 - Comments: 2

Directed self-assembly (DSA) was until recently a rising star in the next-generation lithography (NGL) landscape, but the technology has recently lost some of its luster, if not its momentum. So what happened? Nearly five years ago, an obscure patterning technology called [gettech id="31046" t_name="DSA"] burst onto the scene and began to generate momentum in the industry. At about that t... » read more

Next EUV Challenge: Pellicles
By Mark LaPedus - 27 Apr, 2016 - Comments: 1

Extreme ultraviolet (EUV) lithography is still not ready for high-volume manufacturing, but the technology is at least moving in the right direction. Both the [gettech id="31045" comment="EUV"] light source and resists are making noticeable progress, even though there are still challenges in the arena. And then, there is the EUV mask infrastructure, which also has some gaps. “When EUV i... » read more

10nm Versus 7nm
By Mark LaPedus - 25 Apr, 2016 - Comments: 20

The silicon foundry business is heating up, as vendors continue to ramp their 16nm/14nm finFET processes. At the same time, they are racing each other to ship the next technologies on the roadmap—10nm and 7nm. But the landscape is complicated, with each vendor taking a different strategy. [getentity id="22865" e_name="Samsung"], for one, plans to ship its 10nm [getkc id="185" kc_name="fi... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 22 Apr, 2016 - Comments: 0

Chipmakers As reported, Samsung is expanding its efforts in the foundry business, a move that will put the company on a collision course with TSMC and others. Samsung's foundry unit is expanding is logic portfolio and moving into the specialty foundry front. It will also make its advanced packaging technology available, such as 2.5D interposers, to customers. In a blog, Samsung said it plans t... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy