tag: CVD

Demand, Lead Times Soar For 300mm Equipment
By Mark LaPedus - 20 May, 2021 - Comments: 0

A surge in demand for various chips is causing select shortages and extended lead times for many types of 300mm semiconductor equipment, photomask tools, wafers, and other products. For the last several years, 200mm equipment has been in short supply in the market, but issues are now cropping up throughout the 300mm supply chain, as well. Traditionally, lead times have been three to six mont... » read more

Chasing After Carbon Nanotube FETs
By Mark LaPedus - 18 Mar, 2021 - Comments: 6

Carbon nanotube transistors are finally making progress for potential use in advanced logic chips after nearly a quarter century in R&D. The question now is whether they will move out of the lab and into the fab. Several government agencies, companies, foundries, and universities over the years have been developing, and are now making advancements with carbon nanotube field-effect transi... » read more

3D NAND’s Vertical Scaling Race
By Mark LaPedus - 17 Dec, 2020 - Comments: 1

3D NAND suppliers are accelerating their efforts to move to the next technology nodes in a race against growing competition, but all of these vendors are facing an assortment of new business, manufacturing, and cost challenges. Two suppliers, Micron and SK Hynix, recently leapfrogged the competition and have taken the scaling race lead in 3D NAND. But Samsung and the Kioxia-Western Digital (... » read more

Development Of Planarizing Spin-On Carbon Materials For High-Temperature Processes
By Brewer Science - 20 Aug, 2020 - Comments: 0

Multilayer lithography is used for advanced semiconductor processes to pattern complex structures. As more and more procedures incorporate a high-temperature process, such as chemical vapor deposition (CVD), the need for thermally stable materials increases. For certain applications, a spin-on carbon (SOC) layer under the CVD layer is required to survive through a high-temperature process. ... » read more

Improving EUV Process Efficiency
By Mark LaPedus - 19 Mar, 2020 - Comments: 2

The semiconductor industry is rethinking the manufacturing flow for extreme ultraviolet (EUV) lithography in an effort to improve the overall process and reduce waste in the fab. Vendors currently are developing new and potentially breakthrough fab materials and equipment. Those technologies are still in R&D and have yet to be proven. But if they work as planned, they could boost the flo... » read more

Node Within A Node
By Ed Sperling - 24 Jul, 2019 - Comments: 0

Enough margin exists in manufacturing processes to carve out the equivalent of a full node of scaling, but shrinking that margin will require a collective push across the entire semiconductor manufacturing supply chain. Margin is built into manufacturing at various stages to ensure that chips are manufacturable and yield sufficiently. It can include everything from variation in how lines are... » read more

Inspection, Metrology Challenges Grow For SiC
By Mark LaPedus - 11 Jun, 2019 - Comments: 2

Inspection and metrology are becoming more critical in the silicon carbide (SiC) industry amid a pressing need to find problematic defects in current and future SiC devices. Finding defects always has been a challenging task for SiC devices. But it’s becoming more imperative to find killer defects and reduce them as SiC device vendors begin to expand their production for the next wave of a... » read more

System Bits: June 4
By Jeff Dorsch - 04 Jun, 2019 - Comments: 0

Thin films for quantum computing Researchers at Los Alamos National Laboratory report their development of two-dimensional tungsten/selenium thin films that can control the emission of single photons, potentially useful in quantum technologies. “Efficiently controlling certain thin-film materials so they emit single photons at precise locations—what’s known as deterministic quantum em... » read more

Controlling Variability And Cost At 3nm And Beyond
By Ed Sperling - 22 May, 2019 - Comments: 1

Richard Gottscho, executive vice president and CTO of Lam Research, sat down with Semiconductor Engineering to talk about how to utilize more data from sensors in manufacturing equipment, the migration to new process nodes, and advancements in ALE and materials that could have a big impact on controlling costs. What follows are excerpts of that conversation. SE: As more sensors are added int... » read more

How Atomic Layer Deposition Works
By Dennis Hausmann - 15 Mar, 2018 - Comments: 0

Imagine being able to deposit a film of material just a few atomic layers at a time. As impossible as that sounds, atomic layer deposition (ALD) is a reality. In fact, it’s being used in an ever-increasing number of applications as an extremely precise and controllable process for creating thin films. Together with its etch counterpart – atomic layer etching (ALE) – ALD is enabling the us... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2024 SMG   |  Terms of Service  |  Privacy Policy