tag: finFETs

How We’ll Get There from Here
By Brian Fuller - 09 Apr, 2015 - Comments: 0

The electronics industry is like a battleship with remarkable handling properties. I thought about it this week sitting at an industry event a day after stumbling across Neptune—the technology project, not the god. Those two experiences forced me to rethink some fundamental assumptions about system design and how the ecosystem responds to change. If you’ve not heard of Neptune, it�... » read more

Will Wearables Work Well Enough?
By Ed Sperling - 02 Apr, 2015 - Comments: 0

By Ed Sperling & Ann Steffora Mutschler The rollout of the Apple Watch later this month has reset expectations for the wearable electronics market, just as early implementations of the Pebble, Fitbit and Google Glass helped raise awareness about a new level of portability and connectivity. Early projections are for strong sales, which in turn will propel a new level of connectedness for the ... » read more

Ecosystem Changes
By Ed Sperling - 26 Mar, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss changes in the semiconductor ecosystem with Kelvin Low, senior director of foundry marketing at [getentity id="22865" e_name="Samsung Semiconductor"]; John Costello, vice president of product planning at [getentity id="22849" e_name="Altera"]; Randy Smith, vice president of marketing at [getentity id="22605" e_name="Sonics"], and Michiel Ligthart, p... » read more

TSMC: Rise of the “Phantom Node”
By Barry Pangrle - 23 Mar, 2015 - Comments: 0

TSMC’s financial results for Q4 of 2014 and for the full year were announced in January with TSMC stating it again had achieved record sales and profits. The fourth quarter saw TSMC set records for revenue, earnings per share and cash balance. TSMC made bold predictions last year about 20nm revenue by Q4 2014, and it appears it has met them (see 28nm Powers TSMC Forward, Part Deux). TSMC repo... » read more

Issues And Options At 5nm
By Mark LaPedus - 19 Mar, 2015 - Comments: 0

While the foundries are ramping up their processes for the 16nm/14nm node, vendors are also busy developing technologies for 10nm and beyond. In fact, chipmakers are finalizing their 10nm process offerings, but they are still weighing the technology options for 7nm. And if that isn’t enough, IC makers are beginning to look at the options at 5nm and beyond. Today, chipmakers can see a p... » read more

Thermal Is Still Simmering
By Ann Mutschler - 12 Mar, 2015 - Comments: 0

With the ever increasing sophistication in today’s high-performance [getkc id="81" kc_name="SoC"]s on top of sheer physics of device manufacturing, thermal is a much bigger concern than ever before. It is well understood that thermal and power are closely related, and there exists a vicious cycle between leakage power and temperature: leakage goes up, temperature goes up; temperature goes ... » read more

The Interconnected Web Of Power
By Brian Bailey - 12 Mar, 2015 - Comments: 0

Tradeoffs between area and timing used to follow fairly simple rules. You could improve timing by adding area, and occasionally find an architectural solution that would decrease both at the same time. With physical synthesis the relationship became a little more complicated because an increase in area, say to make a drive larger or add another buffer, might upset the layout. That, in turn, cou... » read more

Partition Lines Growing Fuzzy
By Ed Sperling - 26 Feb, 2015 - Comments: 0

For as long as most semiconductor engineers can remember, chips with discrete functions started out on a printed circuit board, progressed into chip sets when it made sense and eventually were integrated onto the same die. The primary motivations behind this trend were performance and cost—shorter distance, fewer mask layers, less silicon. But this equation has been changing over the past ... » read more

One-On-One: Dave Hemker
By Mark LaPedus - 19 Feb, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Dave Hemker, senior vice president and chief technology officer at [getentity id="22820" comment="LAM Research"]. SE: On the technology front, the IC industry is undergoing some new and dramatic changes. What are some of those changes? Hemker: We focus on what we call the inflections.... » read more

Low Power Trends Toward FinFET
By Mary Ann White - 12 Feb, 2015 - Comments: 0

My previous blog, Power Reduction Techniques, covered which low power techniques were applicable for various process nodes, from larger planar CMOS process technologies through finFET. The 16 and 14nm finFET-based process nodes are moving into production this year, and we are seeing many companies rapidly move their designs to finFET. In my last post, I noted some of the reasons why finFET is s... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy