tag: GlobalFoundries

The Best Foundry Strategy
By Joanne Itow - 21 Feb, 2013 - Comments: 0

By Joanne Itow Today, foundries supply more than 20% of the silicon used to produce all the semiconductor products sold. The foundry impact has grown from only 10% in 1997 to 24% today. The significance of foundries is even more evident when focused on logic wafers alone. Figure 1. Foundry Wafers as a Percent of Total, IC’s, and IC’s Minus Memory [caption id="attachment_7339" align="... » read more

FinFETs, EUV And Moore’s Law
By Ed Sperling - 21 Feb, 2013 - Comments: 0

GlobalFoundries VP Subramani Kengeri talks about progress and problems with advanced processes with Semiconductor Manufacturing & Design. [youtube vid=_Ang0I1vWdI] » read more

Making The Right Choices
By Ed Sperling - 21 Feb, 2013 - Comments: 0

FD-SOI at 28nm, or finFETs at 20/14nm? To companies looking at the cost equation, the total market opportunity for SoCs and the NRE required to get there, this is still a manageable formula. It requires lots of number crunching and some unknowns, but by the time you get done with the math it still falls within an acceptable margin of error and the choices are relatively simple. For foundries... » read more

SOI Highlights at Common Platform Tech Forum
By Various Writers - 19 Feb, 2013 - Comments: 0

Posted by Adele Hars, Editor-in-Chief, Advanced Substrate News ~  ~ The 2013 Common Platform Technology Forum showcased “the latest technological advances being delivered to the world’s leading electronics companies,” so of course SOI-based topics were well-represented. Happily, those of us who weren’t able to get over to Silicon Valley were able to attend “virtually” via a ... » read more

Raising The Stakes For IP
By Ed Sperling - 14 Feb, 2013 - Comments: 0

By Ed Sperling As the amount of IP in an SoC increases, so do the number of players who want to strengthen their position in this market. The big acquisitions that began several years ago over time have proved to be just opening salvos—something that was impossible to predict when this shift began. Synopsys’ purchase of Virage Logic and Cadence’s purchase of Denali, both of which occu... » read more

Uncommon Goals
By Atrenta - 14 Feb, 2013 - Comments: 0

I had the opportunity to attend the Common Platform event recently. This is a technology and business showcase sponsored by Global Foundries, IBM and Samsung with major support from ARM, Cadence, Synopsys and Mentor. Wow, that’s some serious sponsorship. The event was well run and provided a good balance of technology details and business outlook. The wine at the evening reception was decent ... » read more

Math Questions
By Ed Sperling - 08 Feb, 2013 - Comments: 0

The race is on. GlobalFoundries, TSMC, Samsung, IBM and Intel are all neck deep in research, test chips, variability, lithography and three-dimensional transistor designs. For the first time, though, the goal very publicly has shifted from performance and area to energy efficiency. Being able to double battery life with existing performance over the next couple nodes could mean smart phones ... » read more

Stacked Die From A Networking Angle
By Mark LaPedus - 24 Jan, 2013 - Comments: 1

By Mark LaPedus The first wave of 2.5D chips using silicon interposers are trickling out in the marketplace.FPGA vendor Xilinx was the first chipmaker to ship a 2.5D device, and Altera, Cisco, Huawei and IBM recently have talked about their respective 2.5D chip developments. Generally, Altera and Xilinx have taken a somewhat identical and straightforward approach. The two companies are sepa... » read more

ST-Ericsson 28nm FD-SOI/ARM Chip Hits 2.8GHz at CES
By Various Writers - 22 Jan, 2013 - Comments: 0

Posted by Adele Hars, Editor-in-Chief, Advanced Substrate News ~  ~ What a great start to 2013: at CES in Las Vegas, ST-Ericsson announced the NovaThor™ L8580 ModAp, “the world’s fastest and lowest-power integrated LTE smartphone platform.” This is the one that’s on STMicroelectronics’ 28nm FD-SOI, with sampling set for Q1 2013. And it’s a game changer – for users, fo... » read more

Too Many Rules
By Ed Sperling - 13 Dec, 2012 - Comments: 0

By Ed Sperling The number of restrictive design rules that have to be dealt with by routers at 28nm and beyond has increased by several orders of magnitude compared with several generations ago, creating havoc in the automated tools world and slowing down the entire design process. At a time when market windows are shrinking, complexity is making it harder to meet even the old schedules. Th... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy