tag: Intel

More Choices, Less Certainty
By Ed Sperling - 04 Nov, 2015 - Comments: 3

The increasing cost of feature scaling is splintering the chip market, injecting uncertainty into a global supply chain that has been continually fine-tuned for decades. Those with deep enough resources and a clear need for density will likely follow Moore's Law, at least until 7nm. What comes after that will depend on a variety of factors ranging from available lithography—EUV, multi-bea... » read more

Manufacturing Bits: Oct. 27
By Mark LaPedus - 27 Oct, 2015 - Comments: 0

CD-SAXS makes progress For years, chipmakers have used metrology tools based on various optical techniques, such as scatterometry. But optical-based scatterometry may one day run out of steam, prompting the need for a possible replacement. One long-awaited candidate is called X-ray scattering. There are various flavors of X-ray scattering, including CD small-angle X-ray scattering (CD-SAXS)... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 23 Oct, 2015 - Comments: 0

In a major and surprising move in the fab tool business, Lam Research has entered into a definitive agreement to acquire KLA-Tencor for about $10.6 billion in cash and stock. "Lam Research and KLA-Tencor have been working to tie together process and process control in an effort to expand process windows and better enable complex production steps, like multi-patterning. This acquisition form... » read more

What China Is Planning
By Mark LaPedus - 21 Oct, 2015 - Comments: 1

Over the years, China has unveiled several initiatives to advance its domestic semiconductor industry. China has made some progress at each turn, although every plan has fallen short of expectations. But now, the nation is embarking on several new and bold initiatives that could alter the IC landscape. China’s new initiatives address at least three key challenges for its IC industry: 1. C... » read more

ARM Buys Carbon
By Brian Bailey - 20 Oct, 2015 - Comments: 3

ARM acquired Carbon Design Systems and its staff for an undisclosed amount of money, adding virtual prototyping capabilities for ARM cores. The deal is the latest in an onslaught of mergers and acquisitions that have racked the semiconductor industry over the past 18 months, propelled by low interest rates and relatively low valuations of target companies. For ARM, this deal solves a growing... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 16 Oct, 2015 - Comments: 0

Looking to propel the next wave of OLED displays, Applied Materials has rolled out two new systems. The tools enable the volume production of OLED displays for both mobile products and TVs. In addition, Applied Materials has shipped an Applied TopMet roll-to-roll metal deposition system to Jindal Poly Films, a leader in PET and BOPP films for flexible packaging and labeling applications. In... » read more

Analog Meets Power In Standards Groups
By Ann Mutschler - 15 Oct, 2015 - Comments: 4

While the topic of language [getkc id="13" comment="Standards"] might be cringe-worthy for some, there is some noteworthy work underway in this area—particularly where power and analog meet paths. There are four main standards here: Verilog-A and Verilog-AMS VHDL-AMS SystemC-AMS SystemVerilog-AMS SystemVerilog-AMS is the newcomer, and while the standard won't be available for ... » read more

The Week In Review: Manufacturing
By Mark LaPedus - 09 Oct, 2015 - Comments: 0

Is the sky falling in the IC equipment market? Not yet, but watch out below. Semi capital spending is expected to reach $60.37 billion in 2015, down 1% from 2014, according to Pacific Crest Securities. “Although we trimmed 2016 capex three weeks ago, we are trimming some more. We now see semiconductor capex down 4% in 2016. However, we do not see capex falling off a cliff in 2016 (i.e., down ... » read more

Gaps Remain For EUV Masks
By Mark LaPedus - 02 Oct, 2015 - Comments: 4

Extreme ultraviolet (EUV) lithography is once again at a critical juncture. The oft-delayed technology is now being targeted for 7nm. But there are still a number of technologies that must come together before EUV is inserted into mass production at that node. First, the EUV source must generate more power. Second, tool uptime must improve. Third, the industry needs better EUV resists. A... » read more

Executive Insight: Lip-Bu Tan
By Ed Sperling - 01 Oct, 2015 - Comments: 1

Lip-Bu Tan, president and CEO of Cadence, sat down with Semiconductor Engineering to talk about consolidation, Moore's Law, and where the opportunities are in the IoT and automotive markets. What follows are excerpts of that conversation. SE: What are the big concerns for the semiconductor industry in general, and EDA in particular? Tan: Top on my list is all the consolidation that's goin... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy