5 Takeaways From Semicon


As usual, the recent Semicon West trade show was a busy, if not an overwhelming, event. The event, which took place in San Francisco in early July, featured presentations on the usual subjects in the semiconductor and IC-equipment sectors. There were sessions on 200mm, next-generation processes, transistors, lithography, MEMS and many others. In no particular order, here are my five ta... » read more

Foundry Capacity Investment Led By Taiwan And China


The era of every company building a captive fab for next-generation products is ancient history, as foundries throughout the world provide leading-edge technology and flexible capacity in a timely and cost-effective manner. In today’s mobile-driven ecosystem, faster product development cycles and time-to-market have become the norm for the industry. Now, this trend is even spreading to the co... » read more

Building Faster Chips


By Ed Sperling and Jeff Dorsch An explosion in IoT sensor data, the onset of deep learning and AI, and the commercial rollout of augmented and virtual reality are driving a renewed interest in performance as the key metric for semiconductor design. Throughout the past decade in which mobility/smartphone dominated chip design, power replaced performance as the top driver. Processors ha... » read more

The Week In Review: Manufacturing


Fab and test equipment The wafer inspection market is heating up. For example, Applied Materials announced its new e-beam inspection system for use in foundry, logic, DRAM and 3D NAND applications. In addition, KLA-Tencor introduced six wafer defect inspection and review systems for leading-edge IC device manufacturing. National Instruments has rolled out a second-generation vector sig... » read more

Advanced Packaging Options, Issues


Systems in package are heading for the mass market in applications that demand better performance and lower power. As they do, new options for cutting costs are being developed to broaden the appeal of this approach as an alternative to shrinking features. Cost has been one of the big deterrents for widespread adoption of [getkc id="82" kc_name="2.5D"]. Initially, the almost universal compla... » read more

Executive Insight: Aki Fujimura


Aki Fujimura, chief executive of D2S, sat down with Semiconductor Engineering to look at the key issues in lithography and photomasks, as well as the changes taking place in the IC industry. What follows are excerpts of that conversation. SE: The semiconductor market is changing on several fronts. On one front, there is a wave of consolidation in the industry. And then there is a slowdown in... » read more

The Week In Review: Design


Mergers & Acquisitions Silvaco jumped into the IP market with its acquisition of commercialization and management company IPextreme. Founder and CEO Warren Savage will be staying on to head up the new division. Additionally, through wholly owned French subsidiary Infiniscale SA, Silvaco acquired a majority stake in edXact, which focused on parasitic reduction tools. Rambus acquired th... » read more

DAC Day Four: Excitement And Risk


One thing that was new to DAC this year, was an art exhibit. These were pieces of artwork related to our industry, such as chip plots, or more abstract ideas based on design data or analyses. They received many more entrants than their wildest dreams and had to choose a winner from over 80 pieces, but the grand prize was won by a 3D model of a finFET by David Freid of Coventor. This piece was ... » read more

DAC Day Two: Down To Business


DAC day two started with a breakfast presentation put on by Synopsys which included guests from ARM, TSMC and HiSilicon. It was titled Collaborating to Enable Design with the latest processors and finFET processes. Collaboration is a word that we hear increasingly when talking about the advanced nodes and today we are truly at the point where one company cannot do it all. Ron Moore, VP of ma... » read more

The Week In Review: Manufacturing


Chipmakers Through a joint venture with the government of Chongqing, GlobalFoundries will take over an existing 200mm fab in China. Then, GlobalFoundries plans to retrofit the facility and turn it into a 300mm fab. The foundry vendor is transferring its 180nm and 130nm processes to the China fab. Meanwhile, TSMC, UMC and others are also building fabs in China. Samsung Electronics has begu... » read more

← Older posts Newer posts →