The Auto Industry Taking Things Into Their Own Hands


A new standard is here! I can hear a collective groan, but I suggest we quiet down and see what this new direction has to offer. When Audi AG, BMW AG, Daimler AG, Porsche AG, and Volkswagen AG get together to work up a document, there is a shift happening. Although this standard is not out-of-the-oven-fresh, it will mean a change in the industry in the near future. But before I continue, I want... » read more

Moore’s Law At 50


Moore's Law turned 50 this week…but not because of Gordon Moore. He observed that the number of transistors crammed onto a piece of silicon was doubling every 18 to 24 months and predicted that would continue to be the case. He was right, but it took many thousands of engineers who created methodologies and tools to automate the design and equipment to manufacture complex chips to make that o... » read more

What Not To Verify


It is well understood that [getkc id="10" kc_name="verification"] is all about mitigating and managing risk, and success here begins with a good verification planning process. During the planning process, the project team creates a list of specific design functions and use cases that must be verified—and they identify the technique used to verify each specific item on the list. That list c... » read more

What EDA’s Big 3 Think Now


In the past two months the CEOs of Cadence, Synopsys and Mentor Graphics delivered their annual high-level messages to their respective user groups. Semiconductor Engineering attended all of the speeches at these conferences, as it did in 2014 (see story here). From a high level, the big issues for CEOs last year were Moore's Law, the costs of design, the impact of low power, and business-... » read more

Is Art Acceptable In Verification?


The industry appears to have accepted that [getkc id="10" kc_name="verification"] involves art as well as science. This is usually based on one of three reasons, namely: the problem is large and complex; there is a lack of understanding and tools that enable it to be automated; and if it could be made a science, all of the jobs would have migrated offshore. Today, designs are built from pre-... » read more

Partly Sunny, With A Chance For Explosive Growth


I recently attended a session at the Mentor Graphics User Conference (User2User) in San Jose that dealt with the changing foundry landscape. The session was moderated by SemiWiki's Dan Nenni and included: • Giorgio Cesana, director of technology at STMicroelectronics • Jack Harding, co-founder, president & CEO of eSilicon • Lluis Paris, deputy director of worldwide IP alliances at ... » read more

Pressure Builds To Revamp The Design Flow


Without [getkc id="7" kc_name="EDA"] there would be no [getkc id="74" comment="Moore's Law"] as we know it today, and without Moore's Law there would be a much more limited need for EDA. But after more than three decades of developing design flows packed with sophisticated tools to automate semiconductor design through verification, and thereby enable feature shrinks that are the basis of Moore... » read more

Blurring The Lines On Prototyping


Prototyping is an integral part of every [getkc id="81" kc_name="SoC"] today, with two main approaches being used: virtual or software-based, and physical, which includes FPGA-based boards as well as hardware emulation systems. [getkc id="104" kc_name="Virtual prototyping"] is typically used for software development in the early stages of SoC design, even before SoC [getkc id="49" kc_name="R... » read more

Less Moore Means More Intelligence


It would seem as if the entire industry is flooding the forums with articles about [getkc id="74" comment="Moore's Law"], as it reaches its 50th birthday (April 19th) and that this represents the longest and most important exponential in the history of man. The numbers and that impact are everywhere and I do not intend to repeat them. There are lots of articles talking about when Moore’s law ... » read more

How Health And Auto Requirements Drive IoT Design


One of the fun parts of my job is that I am looking at the requirements of our customer’s customers quite a bit to understand where to focus our efforts on the tool side. As a follow on to my last post “System Design Enabling The Human Intranet,” this month I am looking at the requirements imposed on system design by health and automotive applications as they were discussed at DATE in Gre... » read more

← Older posts Newer posts →