category: Top Stories

category: Auto, Security & Edge AI

Move Data Or Process In Place? (Part 2)
By Brian Bailey - 20 Nov, 2017 - Comments: 0

Chip architectures, and even local system architectures, long have found that the best way to improve total system performance and power consumption is to move memory as close to processors as possible. This has led to cache architectures and memories that are tuned for those architectures, as discussed in part 1 of this article. But there are several tacit assumptions made in these architectur... » read more

Variation Spreads At 10/7nm
By Ed Sperling - 16 Nov, 2017 - Comments: 6

Variation between different manufacturing equipment is becoming increasingly troublesome as chipmakers push to 10/7nm and beyond. Process variation is a well-known phenomenon at advanced nodes. But some of that is actually due to variations in equipment—sometimes the exact same model from the same vendor. Normally this would fall well below the radar of the semiconductor industry. But as t... » read more

What’s Next For Atomic Layer Etch?
By Mark LaPedus - 16 Nov, 2017 - Comments: 0

After years in R&D, several fab tool vendors last year finally began to ship systems based a next-generation technology called atomic layer etch (ALE). [getkc id="284" kc_name="ALE"] is is moving into 16/14nm, but it will play a big role at 10/7nm and beyond. The industry also is working on the next wave of ALE technology for advanced logic and memory production. Used by chipmakers fo... » read more

Overlay Challenges On The Rise
By Mark LaPedus - 16 Nov, 2017 - Comments: 2

The overlay metrology equipment market is heating up at advanced nodes as the number of masking layers grows and the size of the features that need to be aligned continue to shrink. Both ASML and KLA-Tencor recently introduced new [getkc id="307" kc_name="overlay"] metrology systems, seeking to address the increasing precision required for lines, cuts and other features on each layer. At 10/... » read more

The Return Of Body Biasing
By Ann Mutschler - 15 Nov, 2017 - Comments: 1

Body biasing is making a comeback across a wide swath of process nodes as designers wrestle with how to build mobile devices with more functionality and longer battery life. Consider an ultra-low-power IoT device with a wireless sensor, for example, which is meant to last for years without changing a battery. Body biasing can be used to create an ultra-low-leakage sleep state. “In that ... » read more

New Drivers For I/O
By Brian Bailey - 13 Nov, 2017 - Comments: 0

Interface standards are on a tear, and new markets are pushing the standards in several directions at the same time. The result could be a lot more innovation and some updates in areas that looked to be well established. Traditionally, this has been a sleepy and predictable part of the industry with standards bodies producing updates to their interfaces at a reasonable rate. Getting data int... » read more

Lots Of Little Knobs For Power
By Ann Mutschler - 09 Nov, 2017 - Comments: 3

Dynamic power is becoming a much bigger worry at new nodes as more finFETs are packed on a die and wires shrink to the point where resistance and capacitance become first-order effects. Chipmakers began seeing dynamic power density issues with the first generation of [getkc id="185" kc_name="finFETs"]. While the 3D transistor structures reduced leakage current by providing better gate contro... » read more

The Next Phase Of Machine Learning
By Kevin Fogarty - 09 Nov, 2017 - Comments: 0

Machine learning is all about doing complex calculations on huge volumes of data with increasing efficiency, and with a growing stockpile of success stories it has rapidly evolved from a rather obscure computer science concept into the go-to method for everything from facial recognition technology to autonomous cars. [getkc id="305" kc_name="Machine learning"] can apply to every corporate fu... » read more

Mixed Messages For Mixed-Signal
By Brian Bailey - 09 Nov, 2017 - Comments: 1

There is no such thing as a purely digital design at advanced nodes today. Even designs that have no [getkc id="37" kc_name="analog"] content are likely relying on [getkc id="38" kc_name="mixed-signal"] components such as SerDes for communications, or voltage regulators for adaptive power control. But the days of purposely attempting to integrate everything including analog and RF onto a single... » read more

China’s Ambitious Automotive Plans
By Ed Sperling - 08 Nov, 2017 - Comments: 1

China has big plans for cars—and other related markets. After years of trailing behind Japanese, European and U.S.-based carmakers in automotive technology, reliability, status, and even market share within its own political borders, the country is making a concerted push into internally developed and manufactured assisted- and self-driving vehicles. The strategy plays out well for China o... » read more

← Older posts Newer posts →

  • Sponsors

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy