category: Top Stories

category: Auto, Security & Edge AI

Manufacturing And Packaging Changes For 2015
By Brian Bailey - 22 Jan, 2015 - Comments: 0

This year more than 26 people provided predictions for 2015. Most of these came from the EDA industry, so the results may be rather biased. However, ecosystems are coming closer together in many parts of the semiconductor food chain, meaning that the EDA companies often can see what is happening in dependent industries and in the system design houses. Thus their predictions may have already res... » read more

One-On-One: Aaron Thean
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss process technology, transistor trends and other topics with Aaron Thean, vice president of process technologies and director of the logic devices R&D program at Imec. SE: Chipmakers are ramping up the 16nm/14nm logic node, with 10nm and 7nm in R&D. What’s the current timeline for 10nm and 7nm? Thean: 10nm is on its way. We will see r... » read more

Semiconductors By The Numbers
By Ed Sperling - 22 Jan, 2015 - Comments: 0

Five economists presented their observations and predictions on a broad range of issues, from cycles to wafer fab materials to geopolitics and how they will affect semiconductor manufacturing at this month's SEMI's Industry Strategy Symposium. Comparing their different viewpoints would be to take them out of context, because their starting points are so different. To avoid confusion, Semicon... » read more

Searching For The Next Power Transistor
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

For decades, the industry has relied on various power semiconductors to control and convert electrical power in an efficient manner. Power semis are ubiquitous, as they are found in adapters, appliances, cars, elevators, switching power supplies, power grids and other systems. But today’s silicon-based power semiconductor transistor technologies, such as IGBTs, MOSFETs and thyristors, are ... » read more

Signal Integrity Issues
By Ed Sperling - 21 Jan, 2015 - Comments: 0

Semiconductor Engineering sat down to discuss signal integrity with Rob Aitken, research fellow at [getentity id="22186" comment="ARM"]; PV Srinivas, senior director of engineering for the Place & Route Division of [getentity id="22017" e_name="Mentor Graphics"]; and Bernard Murphy, chief technology officer at [getentity id="22026" e_name="Atrenta"]. What follows are excerpts of that conver... » read more

Productivity And The IoT
By Ann Mutschler - 19 Jan, 2015 - Comments: 0

The market for devices that connect almost everything to the Internet of Things is projected to explode, creating opportunities for companies that haven’t been traditional chip developers to decide to start developing devices. Semiconductor Engineering sat down to discuss this topic with Jack Guedj, corporate VP of Tensilica products at Cadence; Bill Neifert, CTO at Carbon; Marc Evans, direct... » read more

Higher Frequencies Mean More Memory
By Ann Mutschler - 16 Jan, 2015 - Comments: 0

As SoCs get more complex, whether due to higher frequencies or adding more functionality, there is a spillover effect on bandwidth, [getkc id="22" kc_name="memory"] and power. There is no simple way to just turn up the clock frequency in a complex [getkc id="81" kc_name="SoC"]. That relatively straightforward objective will likely require more power domains, more cores, more ways to move sig... » read more

What Will Change In Design For 2015?
By Brian Bailey - 15 Jan, 2015 - Comments: 0

This year more than 26 people provided predictions for 2015. Most of these came from the EDA industry, so the results may be rather biased. However, ecosystems are coming closer together in many parts of the semiconductor food chain, meaning that the EDA companies often can see what is happening in dependent industries and in the system design houses. Thus their predictions may have already res... » read more

Designing For Automotive
By Ann Mutschler - 15 Jan, 2015 - Comments: 0

As cars include an increasing amount of electronics and electronics subsystems, the number of design challenges involving reliability, cost and power are on the rise. “Reliability tops the list of concerns for the design team because when you put these electronics in, you must know if they are going to operate efficiently by themselves," said Aveek Sarkar, vice president of product enginee... » read more

Unraveling Power Methodologies
By Brian Bailey - 15 Jan, 2015 - Comments: 0

When working on articles, the editors at Semiconductor Engineering sometimes hear things that make them stand back and question what seems to be an industry truth. One such statement happened last month while researching a different article. The statement was: Most designs are not top-down, but in fact bottom-up when it comes to power management. The most used methodology today is that the RTL... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy