tag: 2.5D

Fab Tool R&D And Ramen Noodles
By Mark LaPedus - 22 Jan, 2015 - Comments: 0

The semiconductor equipment and materials industry has always been a tough business. Over the years, vendors have been under pressure to develop new technologies for a shrinking but demanding customer base. And as a result, many vendors could not keep up, or elected to exit the business, causing a massive shakeout in the industry. It isn’t getting any easier, though. Today, tool and... » read more

Designing For Security
By Ernest Worthman - 08 Jan, 2015 - Comments: 0

Stacked die may improve performance and lower power, but the use of [getkc id="203" kc_name="through-silicon vias"] (TSVs) could add new security risks. As IC structures go, the vertical component of these chip packages is both a boon and a bust. Three-dimensional geometries allow for much less complexity in design by stacking two-dimensional dies and interconnecting them in the third dimens... » read more

Is The Stacked Die Ecosystem Stagnating?
By Ann Mutschler - 23 Dec, 2014 - Comments: 0

While the stacked die ecosystem in general is currently status quo, with not much happening in the past year, there is definitely work being done —albeit cautiously—on the design tools side of things. It would be easy to feel impatient that the design tools are not complete and available today for [getkc id="82" comment="2.5D"] and [getkc id="42" comment="3D IC"] implementation until hearin... » read more

Industry Scorecard For 2014
By Brian Bailey - 18 Dec, 2014 - Comments: 0

At the end of last year, Semiconductor Engineering asked the industry about the developments they expected to see in 2014. If you care to refresh your memory, they were categorized under markets, semiconductors and development tools. Now it is time to look back and see how accurate those predictions were and where they fell short. Markets The obvious trend, at the beginning of the year, wa... » read more

Trouble Spots And Optimism For 2015
By Ed Sperling - 18 Dec, 2014 - Comments: 0

Most top executives in the semiconductor industry are bullish about 2015 and even beyond, particularly as the [getkc id="76" comment="Internet of Things"] begins to drive new markets and market mash-ups, and as more semiconductors find their way into markets such as automotive, health-care and manufacturing. But it's not an entirely rosy picture, and top executives point to potential trouble sp... » read more

Is The Stacked Die Ecosystem Stagnating?
By Ann Mutschler - 18 Dec, 2014 - Comments: 2

It is now widely agreed that not much has been happening in terms of adoption for 2.5D interposer and 3D ICs. “It seems like everyone is still at the starting line waiting for the race to begin," said Javier DeLaCruz, senior director of engineering of [getentity id="22242" e_name="eSilicon"]. "Interposer assembly and IP availability for effectively using the [getkc id="82" comment="2.5D IC... » read more

See The Internet Of Things…In 3D
By Steve Schulz - 05 Dec, 2014 - Comments: 0

No, you don’t need 3D glasses to experience two of the hottest emerging technology trends in electronics — just take advantage of the longest running conference series on the topic of 3-D integrated circuits. Now in its 11th year, the 3D Architectures for Semiconductor Integration and Packaging conference will take place in San Francisco next week. The event will feature two pre-conference ... » read more

The Internet Of Cores
By Brian Bailey - 20 Nov, 2014 - Comments: 0

Ever since the birth of the third-party [getkc id="43" comment="IP"] market, there has been a desire for plug-and-play compatibility between cores. Part of the value proposition of reuse is that a block has been used before, and has been verified and validated by having been implemented in silicon. By re-using the core, many of these tasks no longer land on the [getkc id="81" kc_name="SoC"] dev... » read more

Future Directions Unknown
By Ed Sperling - 13 Nov, 2014 - Comments: 0

The semiconductor industry has been on cruise control when it comes to shrinking features, but as process technology progresses to 10nm and 7nm there will be some significant changes. For one thing, the cost per new design will continue to rise, which means only the largest companies with the biggest market opportunity will be able to invest at the leading-edge nodes. Chips for mobile phones... » read more

Design Rules Explode At New Nodes
By Ed Sperling - 03 Nov, 2014 - Comments: 0

Semiconductor Engineering sat down changing design rules with Sergey Shumarayev, senior director of custom IP design at Altera; Luigi Capodieci, R&D fellow at [getentity id="22819" comment="GlobalFoundries"]; Michael White, director of product marketing for Calibre Physical Verification at [getentity id="22017" e_name="Mentor Graphics"], and Coby Zelnik, CEO of [getentity id="22478" e_name=... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy