tag: 3D

The Week In Review: Manufacturing
By Mark LaPedus - 07 Mar, 2014 - Comments: 0

The smartphone market is maturing and slowing down. Now, according to International Data Corp. (IDC), the total tablet market, inclusive of both tablets and 2-in-1 devices, is forecast to grow 19.4% in 2014, down from a growth rate of 51.6% in 2013. IDC also reduced the 2014 forecast by -3.6% from its previous projection to 260.9 million units worldwide. The reduction in the short-term forecast... » read more

The Final Deadline For EUV
By Ed Sperling - 27 Feb, 2014 - Comments: 5

When TSMC disclosed this week—in a public forum—that its production EUV lithography test had failed in one of the early test runs due to a power source issue, there were very different reactions. EUV, after all, is an emotional issue with billions of dollars invested and lots of jobs riding on this technology. To begin with, there has been the usual spin control. The message essentially ... » read more

Manufacturing Bits: Feb. 18
By Mark LaPedus - 18 Feb, 2014 - Comments: 1

Polite cupcake helping robots Cornell and Carnegie Mellon have made a new discovery about robots. If they sound less snippy when they communicate, listeners will respond better. In fact, developers of robots should develop systems that use less confrontational language. In the study, entitled “How a Robot Should Give Advice,” researchers discovered that robots and humans are more lik... » read more

Manufacturing Bits: Feb. 11
By Mark LaPedus - 11 Feb, 2014 - Comments: 1

Monolithic 3D SRAM project A group of companies have started a research project to propel the development of monolithic 3D chip technology. The research project, called COMPOSE³, involves the ability to stack transistors vertically. Within three years, the group hopes to unveil a proof of concept for building the world’s first 14nm, 3D-stacked SRAM cell based on III-V materials. Co... » read more

Manufacturing Bits: Jan. 28
By Mark LaPedus - 28 Jan, 2014 - Comments: 0

Spintronics gains traction The field of spintronics is gaining interest. The technology could enable a new class of spin-based devices, which combine the switching speeds of logic and the non-volatility of memory. Controlling the magnetism by means of electric fields is the key for future devices, but the ability to switch ferromagnetism technology at room temperature is challenging. Helmho... » read more

Experts At The Table: Yield And Reliability Issues With Integrating IP
By Ed Sperling - 27 Jan, 2014 - Comments: 1

Semiconductor Engineering sat down to discuss the impact of integrating IP in complex SoCs with Juan Rey, senior director of engineering at Mentor Graphics; Kevin Yee, product marketing director for Cadence’s SoC Realization Group; and Mike Gianfagna, vice president of marketing at eSilicon. What follows are excerpts of that conversation. SE: As an industry we’ve got a pretty good grasp ... » read more

Fab Tool Industry Has Lost Its Way
By Mark LaPedus - 23 Jan, 2014 - Comments: 1

The relationship between chipmakers and fab tool vendors has always been a bit rocky, but the supply chain has generally worked. Chipmakers demand a tool for a particular application. Then, tool makers attempt to deliver the goods, and ask few, if any, questions. Now, fab tool executives are beginning to ask some tough questions about the industry. And the tension is mounting between equ... » read more

Mixed Signals Seen For Fab Tool Industry
By Mark LaPedus - 14 Jan, 2014 - Comments: 2

After a slight downturn in 2013, the semiconductor equipment market is expected to rebound and see solid growth in 2014, according to forecasters at SEMI’s Industry Strategy Symposium (ISS) at Half Moon Bay, Calif. Gartner, IC Insights and VLSI Research separately projected strong growth in the fab tool industry in 2014. But on the downside, the number of large fab tool buyers continues to... » read more

Industry Restructures Around Cost
By Ed Sperling - 19 Dec, 2013 - Comments: 1

Talk to any semiconductor executive these days about what’s next for their company and you’ll probably encounter the same perspective—cost will drive future design decisions. Dig a little further, however, and you’ll find no consistent strategy for reducing that cost. While the industry has three very viable solutions for improving the power and performance characteristics of SoCs—... » read more

Uncertainty Increases About What’s Next
By Ed Sperling - 24 Oct, 2013 - Comments: 0

Across the semiconductor industry, there is a lot of talk about what’s next. Lithography advances have stalled, NRE and mask costs are rising, and complexity is exploding. But unlike the 1 micron wall, which was supposed to be impenetrable, there is no single issue holding back progress. Instead, there are lots of them, most with pricey workarounds, but which together become more complicat... » read more

← Older posts Newer posts →

  • Sponsors

  • Standards/Organizations

About

Navigation

Connect With Us

Copyright ©2013-2026 SMG   |  Terms of Service  |  Privacy Policy